Hab nun den 2. neuen Video converter bekommen - funktioniert auf anhieb alles.
Also war der erste concerter tot.
Danke für die Hilfe.
Liebe Grüße
Hab nun den 2. neuen Video converter bekommen - funktioniert auf anhieb alles.
Also war der erste concerter tot.
Danke für die Hilfe.
Liebe Grüße
Wie meinst du das? Der USB Grabber hat ja nur einen Video Eingang?
Hello
I have build an anmbilight and unfortunately I can not continue ...
Maybe someone has some advice for me.
Hardware:
PowerSuply:
Grabber
LogiLink - hat aber den Fushicai UTV007
Splitter:
Av Converter:
Led Stripe
Structure according to div instructions and own electronics Experience - soldered clean.
Led Stipes supplied from both ends with 5V.
Latest Open Elec distribution on a Rasbery PI 2 ModB
The LEDs works. I can control it via HyperConf. Also play the different processes via the iphone app.
Only it remains dark over the grabber ...
Tested on the Amazon Fire stick and a VU + Duo cable receiver box (also tested with minimum resolution of the receiver.)
When reading a screenshot from the grabber I get a completely black picture ...
Have tried to switch from Pal to NTCS - also no success.
Yesterday I tried 2 other distributions (osmc and LibreElec). Same problem.
I also directly connected the source with HDMI on the media converter. There is also only a black picture - but now I can exclude the splinter as a Problem.
With unplugged grabber (usb or svideo plug) I also have a black picture ...
Do you think it's the grabber or the media converter's fault?
I attach the konfigs and Log Files etc to:
<
SSH Traffic:
ssh connected
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (460)
ssh in: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Build Time: Jun 3 2017 02:06:37
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 111]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 111]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 111]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "bgr",
ssh in: "name" : "MyHyperionConfig",
ssh in: "output" : "/dev/spidev0.0",
ssh in: "rate" : 1000000,
ssh in: "type" : "apa102"
ssh in: }
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: BLACKBORDER INFO: mode:default
ssh in: started
ssh in: INFO: Json server created and started on port 19444
ssh in: INFO: Proto server created and started on port 19445
ssh in: V4L2GRABBER INFO: width=720 height=576
ssh in: V4L2GRABBER INFO: pixel format=YUYV
ssh in: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: BLACKBORDER INFO: mode:default
ssh in: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: V4L2GRABBER INFO: started
ssh in: INFO: V4L2 grabber created and started
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: V4L2GRABBER INFO: stopped
ssh in: V4L2GRABBER INFO: started
ssh in: EFFECTENGINE INFO: effect finished
OpenELEC:~ # lsusb
Bus 001 Device 004: ID 1b71:3002 Fushicai USBTV007 Video Grabber [EasyCAP]
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Hallo nochmal,
Hab gestern noch 2 ander Distributionen versucht (osmc und LibreElec). Auch hier das selbe Problem.
Hab auch direkt die Quelle mit Hdmi am medienkonverter angeschlossen. Auch nur ein schwarzes Bild - aber ich kann den Splitter ausschließen.
Mit abgestecktem Grabber (usb oder auch svideo Stecker) hab ich auch ein schwarzes Bild...
Denkt ihr ist es der Grabber oder der Medienkonverter der Schuld ist?
Liebe Grüße
Chr1H
Hallo liebe Forengemeinde,
Ich habe mir ein Anmbilight versucht zu bauen und komme leider nicht weiter...
Vielleicht hat jemand einen Rat für mich.
Folgender Aufbau
Netzteil:
Grabber
LogiLink - hat aber den Fushicai UTV007
Splitter:
Av Converter:
Led Stripe
Aufbau entsprechend div Anleitungen und eigener Elektronik Erfahrung sauber verlötet.
Led Stipes von beiden Enden mit 5V versorgt.
Aktuellste Open Elec Distribution auf einem Rasbery PI 2 ModB
Soweit funktionieren die Leds auch alle. Über HyperConf kann ich sie ansteuern. Auch über die Iphone App die verschiedenen Abläufe abspielen.
Nur bleibt es über den Grabber finster...
Getesten am Amazon Fire stick und einer VU+ Duo Kabel Receiverbox (auch mit minimaler Auflösung des Receivers getestet.)
Beim Auslesen eines Screenshots vom Grabber erhalte ich ein komplett schwarzes Bild...
Hab schon versucht nach eineigen empfehlungen anderer Beiträge von Pal auf NTCS zu stellen - auch kein Erfolg.
Anbei hänge ich noch die Konfigs und Log Files usw an:
SSH Traffic:
ssh connected
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (460)
ssh in: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Build Time: Jun 3 2017 02:06:37
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 111]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 111]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 111]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "bgr",
ssh in: "name" : "MyHyperionConfig",
ssh in: "output" : "/dev/spidev0.0",
ssh in: "rate" : 1000000,
ssh in: "type" : "apa102"
ssh in: }
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: BLACKBORDER INFO: mode:default
ssh in: started
ssh in: INFO: Json server created and started on port 19444
ssh in: INFO: Proto server created and started on port 19445
ssh in: V4L2GRABBER INFO: width=720 height=576
ssh in: V4L2GRABBER INFO: pixel format=YUYV
ssh in: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: BLACKBORDER INFO: mode:default
ssh in: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: V4L2GRABBER INFO: started
ssh in: INFO: V4L2 grabber created and started
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: V4L2GRABBER INFO: stopped
ssh in: V4L2GRABBER INFO: started
ssh in: EFFECTENGINE INFO: effect finished
OpenELEC:~ # lsusb
Bus 001 Device 004: ID 1b71:3002 Fushicai USBTV007 Video Grabber [EasyCAP]
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub