Thanks for the responses. Apparently i did not have SPI on... I am not sure where I missed that in the tutorial but Im going back to see if i can find it...
OpenELEC (official) Version: 8.0.3
OpenELEC:~ # grep -r 'dtparam' /flash/config.txt
grep: /flash/config.txt: No such file or directory
I found and followed this and now spi is on but still no luck.
https://hyperion-project.org/t…ot-working.303/#post-2476
mount -o remount,rw /flash
cd /flash/overlays/
curl -L --output enable-spi-overlay.dtb --get https://dl.dropboxusercontent.com/u/3669512/temp/enable-spi-overlay.dtb
nano /flash/config.txt
device_tree_overlay=overlays/enable-spi-overlay.dtb
dtparam=spi=on
Now it shows this:
OpenELEC (official) Version: 8.0.3
OpenELEC:~ # grep -r 'dtparam' /flash/config.txt
dtparam=spi=on
And new log
SSH Traffic:
ssh connected
sftp Send Hyperion Config - Sourcepath: /home/pi/JD Hyperion, Targetpath: /storage/.config/, Filename: hyperion.config.json
ssh out: /storage/.config/autostart.sh > /dev/null 2>&1 &
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (891)
ssh in: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Build Time: Jun 3 2017 02:06:37
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 99]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 99]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 99]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "name" : "MyHyperionConfig",
ssh in: "output" : "/dev/spidev0.0",
ssh in: "rate" : 1000000,
ssh in: "type" : "ws2801"
ssh in: }
ssh in: Failed to open device('/dev/spidev0.0')
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: BLACKBORDER INFO: mode:default
ssh in: started
ssh in: terminate called after throwing an instance of 'std::runtime_error'
ssh in: what(): JSONSERVER ERROR: could not bind to port
ssh in: Aborted (core dumped)
ssh out: killall hyperiond 2>/dev/null
ssh out: /storage/.config/autostart.sh > /dev/null 2>&1 &
ssh out: cd /tmp && curl -# -k -L --output install_hyperion.sh --get https://raw.github.com/hyperion-project/hyperion/master/bin/install_hyperion.sh && sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
ssh out: ######################################################################## 100.0%
ssh in: *******************************************************************************
ssh in: This script will install/update Hyperion Ambient Light
ssh in: Created by brindosch - hyperion-project.org - the official Hyperion source.
ssh in: *******************************************************************************
ssh in: ---> Stop Hyperion, if necessary
ssh in: ---> Downloading the appropriate Hyperion release
ssh in: ---> Downloading Hyperion OpenELEC/LibreELEC release
ssh out: ############### 22.0%
ssh out: ############################### 43.9%
ssh out: ############################################## 63.9%
ssh out: ############################################################ 83.9%
ssh out: ######################################################################## 100.0%
ssh in: ---> Downloading Hyperion OpenELEC/LibreELEC dependencies
ssh out: ## 3.5%
ssh out: ###### 8.8%
ssh out: ######### 13.4%
ssh out: ############## 19.6%
ssh out: #################### 28.0%
ssh out: ########################## 36.2%
ssh out: ################################ 45.4%
ssh out: ######################################## 56.9%
ssh out: ################################################ 67.7%
ssh out: ####################################################### 77.4%
ssh out: ############################################################### 88.2%
ssh out: ###################################################################### 98.3%
ssh out: ######################################################################## 100.0%
ssh in: ---> Starting Hyperion
ssh in: *******************************************************************************
ssh in: Hyperion Installation/Update finished!
ssh in: Please download the latest HyperCon version to benefit from new features!
ssh in: To create a config, follow the HyperCon Guide at our Wiki (EN/DE)!
ssh in: Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org
ssh in: *******************************************************************************
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (977)
ssh in: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Build Time: Jun 3 2017 02:06:37
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 99]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 99]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 99]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "name" : "MyHyperionConfig",
ssh in: "output" : "/dev/spidev0.0",
ssh in: "rate" : 1000000,
ssh in: "type" : "ws2801"
ssh in: }
ssh in: Failed to open device('/dev/spidev0.0')
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: BLACKBORDER INFO: mode:default
ssh in: started
ssh in: INFO: Json server created and started on port 19444
ssh in: INFO: Proto server created and started on port 19445
ssh in: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: BLACKBORDER INFO: mode:default
ssh in: INFO: Frame grabber created and started
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: EFFECTENGINE INFO: effect finished
Alles anzeigen
RPI 3b with 5V 10A power supply
I am using these WS2801 LEDs:
Yaqing Lighting 16.4ft/5M WS2801 Addressable LED Strip from Amazon
Link: http://a.co/3VOPabI
http://Link: http://a.co/3VOPabI