Beiträge von GrayGhost93

No problem, everything is working so far now, thanks a lot for your help!
But normaly I would suspect the LOG-file in /var/log

Right now there is one, but I created it, before there was none. Normally I do all via SSH

Okay, stopped it, reinstalled it and created direktory logfiles in /storage/ now log works:

ssh out: cd /tmp && curl -# -k -L --output install_hyperion.sh --get https://raw.github.com/hyperio…r/bin/install_hyperion.sh && sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
ssh out: ######################################################################## 100.0%
ssh in: *******************************************************************************
ssh in: This script will install/update Hyperion ambilight
ssh in: Created by brindosch - hyperion-project.org - the official Hyperion source.
ssh in: *******************************************************************************
ssh in: ---> Stop Hyperion, if necessary
ssh in: ---> Backup Hyperion configuration(s), if present
ssh in: '/storage/.config/hyperion.config.json' -> '/tmp/hyperion.config.json'
ssh in: ---> Downloading the appropriate Hyperion release
ssh in: ---> Downloading Hyperion OpenELEC release
ssh out: 1.0%
ssh out: #### 6.6%
ssh out: #################### 28.0%
ssh out: ######################################## 55.6%
ssh out: ############################################################# 85.3%
ssh out: ######################################################################## 100.0%
ssh in: ---> Downloading Hyperion OpenELEC dependencies
ssh out: 0.2%
ssh out: # 1.5%
ssh out: #### 6.4%
ssh out: ######### 13.6%
ssh out: ############# 19.1%
ssh out: ################## 25.4%
ssh out: ##################### 29.7%
ssh out: ######################### 34.8%
ssh out: ############################# 40.4%
ssh out: ################################ 45.8%
ssh out: ##################################### 51.6%
ssh out: ######################################### 57.5%
ssh out: ############################################# 63.3%
ssh out: ################################################# 69.1%
ssh out: ####################################################### 76.8%
ssh out: ############################################################ 84.1%
ssh out: ################################################################# 91.5%
ssh out: ######################################################################## 100.0%
ssh in: ---> Restore Hyperion configuration(s), if present
ssh in: '/tmp/hyperion.config.json' -> '/storage/.config/hyperion.config.json'
ssh in: ---> Starting Hyperion
ssh in: *******************************************************************************
ssh in: Hyperion Installation/Update finished!
ssh in: Please download the latest HyperCon version to benefit from new features!
ssh in: To create a config, follow the HyperCon Guide at our Wiki (EN/DE)!
ssh in: Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org
ssh in: *******************************************************************************
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon
ssh in: Version : V1.02.0 (brindosch-2828c78/95e4d4e-1461938433
ssh in: Build Time: Apr 29 2016 12:49:00
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 93]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 93]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 93]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "name" : "MyHyperionConfig",
ssh in: "output" : "/dev/spidev0.0",
ssh in: "rate" : 1000000,
ssh in: "type" : "ws2801"
ssh in: }
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=40;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Kodi checker created and started
ssh in: INFO: Json server created and started on port 19444
ssh in: INFO: Proto server created and started on port 19445
ssh in: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: BLACKBORDER INFO: mode:default
ssh in: INFO: Frame grabber created and started
ssh in: KODICHECK INFO: Kodi Connected
ssh in: KODICHECK INFO: Kodi Message: {"id":666,"jsonrpc":"2.0","result":[]}
ssh in: KODICHECK INFO: switching to OFF mode
ssh in: KODICHECK INFO: Kodi Message: {"id":668,"jsonrpc":"2.0","result":{"System.ScreenSaverActive":true}}
ssh in: KODICHECK INFO: Kodi Message: {"id":670,"jsonrpc":"2.0","result":{"version":{"major":15,"minor":2,"revision":"02e7013","tag":"stable"}}}

Did new Install:

ssh connected
ssh out: cd /tmp && curl -# -k -L --output install_hyperion.sh --get https://raw.github.com/hyperio…r/bin/install_hyperion.sh && sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
ssh out: ######################################################################## 100.0%
ssh in: *******************************************************************************
ssh in: This script will install/update Hyperion ambilight
ssh in: Created by brindosch - hyperion-project.org - the official Hyperion source.
ssh in: *******************************************************************************
ssh in: ---> Stop Hyperion, if necessary
ssh in: ---> Backup Hyperion configuration(s), if present
ssh in: '/storage/.config/hyperion.config.json' -> '/tmp/hyperion.config.json'
ssh in: ---> Downloading the appropriate Hyperion release
ssh in: ---> Downloading Hyperion OpenELEC release
ssh out: 1.0%
ssh out: #### 6.2%
ssh out: ################### 27.1%
ssh out: ################################# 46.4%
ssh out: ###################################################### 75.1%
ssh out: ######################################################################## 100.0%
ssh in: ---> Downloading Hyperion OpenELEC dependencies
ssh out: 0.2%
ssh out: # 1.5%
ssh out: ### 5.4%
ssh out: ####### 9.9%
ssh out: ########### 15.5%
ssh out: ################ 23.2%
ssh out: ##################### 29.7%
ssh out: ########################## 37.4%
ssh out: ################################ 45.1%
ssh out: ###################################### 52.8%
ssh out: ########################################### 60.5%
ssh out: ################################################ 68.0%
ssh out: ###################################################### 75.9%
ssh out: ########################################################### 82.2%
ssh out: ################################################################ 89.7%
ssh out: ####################################################################### 99.3%
ssh out: ######################################################################## 100.0%
ssh in: ---> Restore Hyperion configuration(s), if present
ssh in: '/tmp/hyperion.config.json' -> '/storage/.config/hyperion.config.json'
ssh in: ---> Starting Hyperion
ssh in: *******************************************************************************
ssh in: Hyperion Installation/Update finished!
ssh in: Please download the latest HyperCon version to benefit from new features!
ssh in: To create a config, follow the HyperCon Guide at our Wiki (EN/DE)!
ssh in: Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org
ssh in: *******************************************************************************

Tried to get log:
ssh out: cat /storage/logfiles/hyperion.log
ssh out: cat: can't open '/storage/logfiles/hyperion.log': No such file or directory

Went wrong like before ...

And I know

Okay, thanks for the hint, this gives the following:

./hyperiond /storage/.config/hyperion.config.json
Hyperion Ambilight Deamon
Version : V1.02.0 (brindosch-2828c78/95e4d4e-1461938433
Build Time: Apr 29 2016 12:49:00
INFO: Selected configuration file: /storage/.config/hyperion.config.json
HYPERION INFO: ColorTransform 'default' => [0; 93]
HYPERION INFO: ColorCorrection 'default' => [0; 93]
HYPERION INFO: ColorAdjustment 'default' => [0; 93]
LEDDEVICE INFO: configuration:
{
"colorOrder" : "rgb",
"name" : "MyHyperionConfig",
"output" : "/dev/spidev0.0",
"rate" : 1000000,
"type" : "ws2801"
}

INFO: Creating linear smoothing
HYPERION (CS) INFO: Created linear-smoothing(interval_ms=40;settlingTime_ms=200;updateDelay=0
EFFECTENGINE INFO: Initializing Python interpreter
INFO: Hyperion started and initialised
INFO: Kodi checker created and started
INFO: Json server created and started on port 19444
INFO: Proto server created and started on port 19445
DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
BLACKBORDER INFO: threshold set to 0 (0)
BLACKBORDER INFO: mode:default
INFO: Frame grabber created and started
KODICHECK INFO: Kodi Connected
KODICHECK INFO: Kodi Message: {"id":666,"jsonrpc":"2.0","result":[]}
KODICHECK INFO: switching to OFF mode
KODICHECK INFO: Kodi Message: {"id":668,"jsonrpc":"2.0","result":{"System.ScreenSaverActive":true}}
KODICHECK INFO: Kodi Message: {"id":670,"jsonrpc":"2.0","result":{"version":{"major":15,"minor":2,"revision":"02e7013","tag":"stable"}}}

EDIT: Like this I can work with the App, but it doesn't work while playing a movie ...

Thanks for the quick reply!
Wires are correct.

Hyperiond gives the following:

./hyperiond
Hyperion Ambilight Deamon
Version : V1.02.0 (brindosch-2828c78/95e4d4e-1461938433
Build Time: Apr 29 2016 12:49:00
ERROR: Missing required configuration file. Usage:
hyperiond [config.file]

Here is the link to the config-file:
[MEDIA=pastebin]wmQnTy8g[/MEDIA]

Im trying to get it running on an raspberry 2 (Openelec 6.0.3)

Performed installation, sent config, reboot

Only first LED is running on red, none other. Log file is not present:
cat /storage/logfiles/hyperion.log
cat: can't open '/storage/logfiles/hyperion.log': No such file or directory
and there is as well no log-file under /var/log/

Hope you can help me!