Posts by Tyler983

Ok ok i will play with the Baudrate, but let me know about the genuine Arduino are you talking about. Maybe buying it I can solve, do you have a link to the product I can see?

Hey @Awawa do you think mine it's a clone? I bought it on amazon and it was sold and shipped by amazon as prime product...the box is genuine. Damn!!!
Here the pics:

I think I’ll put it in the list, but just for rpi4. Thx a lot for your time, really

Right

Done
nothing happened.
following the debug

How can I disable serial-getty@ttyAMA0.service ?

This is what I got, what should I delete?
console=serial0,115200 console=tty1 root=PARTUUID=ca5dffb5-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait

now debug show it in addition to what I posted before
2020-09-26T16:17:09.613Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'adalight' signals error: 'Timeout writing data to ttyACM0' 2020-09-26T16:17:09.618Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: disabled 2020-09-26T16:21:43.795Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.50.129

Ok done, leds are off.
Following the debug complete

Right, I'm doing it. Soon I'll tell you how's gone

Well Summarizing

1) i have 2 sd: 1 for rpi3 and 1 for rpi4. On the rpi4 I installed raspbian lite with your fork and it function on rpi3. On the rpi3 I have hyperbian with hyperion ng alpha 8 official. Both sd function on rpi3 but doesn't on the rpi4
2) Right, on rip 4 nothing works

sorry following the complete debug after reboot.

Yes, I've pugged lightberry and rebooted it.
this is the log in debug mode:

2020-09-26T15:43:39.709Z [hyperiond DAEMON] (ERROR) The CEC handler can not be instantiated, because it has been left out from the build 2020-09-26T15:44:33.787Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'adalight' signals error: 'Timeout writing data to ttyACM0' 2020-09-26T15:48:40.024Z [hyperiond V4L2:AUTO] (DEBUG) (V4L2Grabber.cpp:992:process_image()) Video FPS: 29.88, av. delay: 38ms, good: 1773, bad: 20 (60.03,15)

2020-09-26T15:43:39.709Z [hyperiond DAEMON] (ERROR) The CEC handler can not be instantiated, because it has been left out from the build 2020-09-26T15:44:33.787Z [hyperiond LEDDEVICE] (ERROR) Device disabled, device 'adalight' signals error: 'Timeout writing data to ttyACM0'

Tradotto in:
Italiano
Spettacolo originale
Now I've disabled it... there's something other I ca do?

[LEFT]Original text[/LEFT]
Contribute a better translation

Sudo commands doesn't function, so I tried with lightberry connected and this is the result
pi@raspberrypi:~ $ ls -l /dev/ttyACM0
crw-rw---- 1 root dialout 166, 0 Sep 26 16:20 /dev/ttyACM0

with lightberry disconnected:
pi@raspberrypi:~ $ ls -l /dev/ttyACM0
crw-rw---- 1 root dialout 166, 0 Sep 26 16:22 /dev/ttyACM0

Hi @Awawa following the dmesg as you asked. This is the ssd with your last fork installed, rpi4, ezcap269, usb3 plugged.
Nothing to do, leds are all off.
The same sd go like a charm in the rpi3.
What to do?

Ok when i'll be at home i'll post it

Good day @Awawa yesterday i deleted the strings you suggested from cmdline.txt but the result is always the same: no leds...I don't know what to do with this rpi4.

Thx i'll give it a read
another thing... i generate a lut file, but as you explain in the first post, i haven't : the Hyperion configuration folder.

Typically /home/pi/.hyperion/.....

I searched it with cyberduck but folder "pi" is empty.