Posts by Tyler983

I think you’re right, cause I have the same errors on the rpi3 but there less are on...
Where I can remove those strings?

@Awawa I installed a fresh build of Raspbian lite, your last fork and deactivate bluetooth with the command line you suggested. Ezcap is plugged to the usb3 port but nothing happen... leds are off.
attached you can find last dmesg and the errors are always the same.
What to do?

Colors looks great!!! Well done, i'm waiting a second sd to test it.

Ok i will post it tomorrow cause now I'm on the rpi3...

@Awawa i transferred the sd from the rpi3 to the rpi4 but it doesn't work. Leds are off on the rpi4

Ok thx I will check for a solution

@Awawa i noticed that my leds stay on also if I turn off the tv. What can I do to avoid it?

Ok Thx a lot, I will buy a second sd to install your fork. Newly thx a lot!!!

I will install your fork as soon as I found a right configuration for my system. Before of it I must fix delay and colors calibration.
Do you have some suggestions to solve the delay?

I GOT IT!!!!!! thhhhhhxxxxx @Awawa !!! Leds are finally going. dmesg errors are still there but leds are going. I can see a bit of delay response, I need to calibrate them.
Do you think I can connect rpi4 now or better not?

This is my config.txt file

@Awawa I don't know if I made it right, but I inserted the string: dtoverlay=disable-bt in config.txt on the ssd, lunch the command
sudo systemctl disable hciuart but nothing happened... dmesg always show the same errors.
Did I made something wrong?

Please let's keep in touch, in the evening i'll let you know

Thx a lot @Awawa in the evening i'll do it and post the result. In Boot/config.txt what i must modify?

Ok @Lord-Grey when i'll be at home i'll change the name and i'll show the log. Thx

Hi @Awawa do you have a command line to disable Bluetooth? I tried through cyber duck but with no luck. Ok for the port setting

Here we are...

Still nothing, I transferred the sd to the rpi3 and still nothing happened, Still problems...
If someone wants help me, following there's the dmesg I obtained.
Thx a lot

Yesterday i used the second usb converter and the result is the same. When i'll be at home i'll try with the rpi3... maybe the problem is inside the rpi4

Sure, tomorrow I'll try with my rpi3 and I'll post here the result. Thx