Beiträge von Vlad
-
-
-
Alles anzeigen
Hello Vlad,
yes i use Raspian. I tested "RASPBIAN STRETCH WITH DESKTOP" and "RASPBIAN STRETCH LITE". With both systems the same Problem.
I built Ambilight for the PC. I use the programm "HyperionScreenCap" to send the picture information to the Pi zero. I don't need USB Video Grabber.
HyperionScreenCap: https://github.com/hanselb/HyperionScreenCap
Would OSMC be suitable for me? I do not need a media player.
Thank you
Thanks in advance.
EDIT:
I use a Pi 1B + for myTV ambilight. It's works perfect.I plugged the SD-Card from the Pi 1B+ into the Pi Zero, but the Zero will not start.
Another try.
I installed "RASPBIAN STRETCH LITE" on a SD-Card with Hyperion and aktivate SPI. On the Pi Zero I must stop and start Hyperion thats it's work. If I use this SD-Card in my Pi B+ then I have the same problem. I must stop and start Hyperion.
Only why?
It the new Raspian version the problem?
EDIT 2:
Hello Vlad,
you saved the weekend for me.
I installed OSMC and Hyperion works as it should.
Thanks for the help.
I am very happy that i helped you ))) , i had this problem a long time , and nobody could help me ) , and i found exit))) , good luck =)) -
-
To turn on and off i used reley on 5v and rf remote ( it is not good for sd card , but now i have remote =)))1)rpi zero w(https://ru.aliexpress.com/item/2017...ec58-4118-93b6-88fce07109e4&priceBeautifyAB=0)
2)hdmi to av (https://ru.aliexpress.com/item/VOXL...32815006229.html?spm=a2g0s.9042311.0.0.Mlaez8 )
3)apa 102 (https://ru.aliexpress.com/item/1m-5...lgo_pvid=812d324b-7533-4165-a9fc-dfe216d72c61 )
4)utv007 (https://ru.aliexpress.com/item/BELC...32314462209.html?spm=a2g0s.9042311.0.0.DvSAlc )
5)hdmi splitter 4k (https://ru.aliexpress.com/item/HDCP...d176271&transAbTest=ae803_1&priceBeautifyAB=0)
6) power 5v 10a (https://ru.aliexpress.com/item/5V-L...id=8432765d-6b8d-4cfa-b75f-5358441177b9&tpp=1)
7) 4 pin connector (i like it =)) )
https://ru.aliexpress.com/item/5-pa...444.html?spm=a2g0s.9042311.0.0.274233ed11hYSm8)hdmi corner (https://ru.aliexpress.com/item/Ugre...5872,scm-url:1007.13338.98644.000000000000000 )
9)hdmi 15 cm (left to left) ( https://ru.aliexpress.com/item/HDMI...6bdbea2&transAbTest=ae803_1&priceBeautifyAB=0)
10)rf remote (https://ru.aliexpress.com/item/2-ke...id=d446a4fc-07b8-4636-bef6-6f998b9c1cc4&tpp=1)
11) rf reley ( i used this pcb but only changed relay to 5 v and soldered on resistor smd 221 another resistor smd 301( see on photo) , or you can put only about 600 ohm smd , because with stock resistor when strip turns on reley switches off) https://ru.aliexpress.com/item…042311.0.0.274233edI9JJR6
12)reley 5v (https://ru.aliexpress.com/item/10PC...924.html?spm=a2g0s.9042311.0.0.51e933edIVCgNd )
13) resistor smd 301 (https://ru.aliexpress.com/item/500p...ff101a2&transAbTest=ae803_2&priceBeautifyAB=0 )
268 led -
With OSMC all is perfect )) , look on my assembly) https://hyperion-project.org/t…102-sk9822-any-hdmi.3098/
-
Alles anzeigen
Hello together,
I have a problem with my Pi Zero W. Hyperion only works if I stop and start hyperion with HyperCon.
After I stop and start hyperion I can change the colour with Hypercon. It does not work before I that do that.
The log from HyperCon:
Code
Alles anzeigenSSH Traffic: ssh connected ssh disconnected ssh connected ssh out: sudo journalctl -u hyperion.service 2>/dev/null ssh in: -- Logs begin at Thu 2016-11-03 18:16:43 CET, end at Thu 2018-08-16 18:52:10 CEST. -- ssh in: Aug 16 18:48:59 raspberrypi systemd[1]: Started Hyperion Systemd service. ssh in: Aug 16 18:49:00 raspberrypi hyperiond[250]: Hyperion Ambilight Deamon (250) ssh in: Aug 16 18:49:00 raspberrypi hyperiond[250]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: Aug 16 18:49:00 raspberrypi hyperiond[250]: Build Time: Apr 5 2018 01:57:25 ssh in: Aug 16 18:49:01 raspberrypi hyperiond[250]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json ssh in: Aug 16 18:49:01 raspberrypi hyperiond[250]: HYPERION INFO: ColorTransform 'default' => [0; 76] ssh in: Aug 16 18:49:01 raspberrypi hyperiond[250]: HYPERION INFO: ColorCorrection 'default' => [0; 76] ssh in: Aug 16 18:49:01 raspberrypi hyperiond[250]: HYPERION INFO: ColorAdjustment 'default' => [0; 76] ssh in: Aug 16 18:49:01 raspberrypi hyperiond[250]: LEDDEVICE INFO: configuration: ssh in: Aug 16 18:49:01 raspberrypi hyperiond[250]: { ssh in: Aug 16 18:49:01 raspberrypi hyperiond[250]: "colorOrder" : "bgr", ssh in: Aug 16 18:49:01 raspberrypi hyperiond[250]: "name" : "MyHyperionConfig", ssh in: Aug 16 18:49:01 raspberrypi hyperiond[250]: "output" : "/dev/spidev0.0", ssh in: Aug 16 18:49:01 raspberrypi hyperiond[250]: "rate" : 1000000, ssh in: Aug 16 18:49:01 raspberrypi hyperiond[250]: "type" : "apa102" ssh in: Aug 16 18:49:01 raspberrypi hyperiond[250]: } ssh in: Aug 16 18:49:01 raspberrypi hyperiond[250]: Failed to open device('/dev/spidev0.0') ssh in: Aug 16 18:49:01 raspberrypi hyperiond[250]: INFO: Creating linear smoothing ssh in: Aug 16 18:49:01 raspberrypi hyperiond[250]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0 ssh in: Aug 16 18:49:01 raspberrypi hyperiond[250]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects ssh in: Aug 16 18:49:01 raspberrypi hyperiond[250]: EFFECTENGINE INFO: Initializing Python interpreter ssh in: Aug 16 18:49:03 raspberrypi hyperiond[250]: INFO: Hyperion started and initialised ssh in: Aug 16 18:49:03 raspberrypi hyperiond[250]: INFO: Boot sequence 'Knight rider' EFFECTENGINE INFO: run effect Knight rider on channel 0 ssh in: Aug 16 18:49:03 raspberrypi hyperiond[250]: BLACKBORDER INFO: threshold set to 0 (0) ssh in: Aug 16 18:49:03 raspberrypi hyperiond[250]: BLACKBORDER INFO: mode:default ssh in: Aug 16 18:49:03 raspberrypi hyperiond[250]: started ssh in: Aug 16 18:49:03 raspberrypi hyperiond[250]: INFO: Json server created and started on port 19444 ssh in: Aug 16 18:49:03 raspberrypi hyperiond[250]: INFO: Proto server created and started on port 19445 ssh in: Aug 16 18:49:07 raspberrypi hyperiond[250]: EFFECTENGINE INFO: effect finishedHyperion runs, but can not open the "device('/dev/spidev0.0')".
My hyperion.config.json:
Code
Alles anzeigen// Automatically generated configuration file for Hyperion ambilight daemon // Notice: All values are explained with comments at our wiki: wiki.hyperion-project.org (config area) // Generated by: HyperCon (The Hyperion deamon configuration file builder) // Created with HyperCon V1.03.3 (22.10.2017) { // DEVICE CONFIGURATION "device" : { "name" : "MyHyperionConfig", "type" : "apa102", "output" : "/dev/spidev0.0", "rate" : 1000000, "colorOrder" : "bgr" }, // COLOR CALIBRATION CONFIG "color" : { "channelAdjustment" : [ { "id" : "default", "leds" : "*", "pureRed" : { "redChannel" : 255, "greenChannel" : 0, "blueChannel" : 0 }, "pureGreen" : { "redChannel" : 0, "greenChannel" : 255, "blueChannel" : 0 }, "pureBlue" : { "redChannel" : 0, "greenChannel" : 0, "blueChannel" : 255 } } ], "temperature" : [ { "id" : "default", "leds" : "*", "correctionValues" : { "red" : 255, "green" : 255, "blue" : 255 } } ], "transform" : [ { "id" : "default", "leds" : "*", "hsl" : { "saturationGain" : 1.0000, "luminanceGain" : 0.7000, "luminanceMinimum" : 0.1200 }, "red" : { "threshold" : 0.0000, "gamma" : 2.5000 }, "green" : { "threshold" : 0.0000, "gamma" : 2.5000 }, "blue" : { "threshold" : 0.0000, "gamma" : 2.5000 } } ], // SMOOTHING CONFIG "smoothing" : { "type" : "linear", "time_ms" : 200, "updateFrequency" : 20.0000, "updateDelay" : 0 } }, // NO V4L2 GRABBER CONFIG // BLACKBORDER CONFIG "blackborderdetector" : { "enable" : true, "threshold" : 0.0, "unknownFrameCnt" : 600, "borderFrameCnt" : 50, "maxInconsistentCnt" : 10, "blurRemoveCnt" : 1, "mode" : "default" }, // BOOTEFFECT CONFIG "bootsequence" : { "color" : [0,0,0], "effect" : "Knight rider", "duration_ms" : 3000, "priority" : 700 }, // JSON SERVER CONFIG "jsonServer" : { "port" : 19444 }, // PROTO SERVER CONFIG "protoServer" : { "port" : 19445 }, // EFFECT PATH "effects" : { "paths" : [ "/storage/hyperion/effects", "/usr/share/hyperion/effects" ] }, // NO FRAME GRABBER CONFIG // NO KODI CHECK CONFIG // NO BOBLIGHT SERVER CONFIG // NO JSON/PROTO FORWARD CONFIG // LED CONFIGURATION "leds" : [ { "index" : 0, "hscan" : { "minimum" : 0.2759, "maximum" : 0.3103 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 1, "hscan" : { "minimum" : 0.2414, "maximum" : 0.2759 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 2, "hscan" : { "minimum" : 0.2069, "maximum" : 0.2414 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 3, "hscan" : { "minimum" : 0.1724, "maximum" : 0.2069 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 4, "hscan" : { "minimum" : 0.1379, "maximum" : 0.1724 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 5, "hscan" : { "minimum" : 0.1034, "maximum" : 0.1379 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 6, "hscan" : { "minimum" : 0.0690, "maximum" : 0.1034 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 7, "hscan" : { "minimum" : 0.0345, "maximum" : 0.0690 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 8, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0345 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 9, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }, "vscan" : { "minimum" : 0.9333, "maximum" : 1.0000 } }, { "index" : 10, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }, "vscan" : { "minimum" : 0.8667, "maximum" : 0.9333 } }, { "index" : 11, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }, "vscan" : { "minimum" : 0.8000, "maximum" : 0.8667 } }, { "index" : 12, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }, "vscan" : { "minimum" : 0.7333, "maximum" : 0.8000 } }, { "index" : 13, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }, "vscan" : { "minimum" : 0.6667, "maximum" : 0.7333 } }, { "index" : 14, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }, "vscan" : { "minimum" : 0.6000, "maximum" : 0.6667 } }, { "index" : 15, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }, "vscan" : { "minimum" : 0.5333, "maximum" : 0.6000 } }, { "index" : 16, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }, "vscan" : { "minimum" : 0.4667, "maximum" : 0.5333 } }, { "index" : 17, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }, "vscan" : { "minimum" : 0.4000, "maximum" : 0.4667 } }, { "index" : 18, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }, "vscan" : { "minimum" : 0.3333, "maximum" : 0.4000 } }, { "index" : 19, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }, "vscan" : { "minimum" : 0.2667, "maximum" : 0.3333 } }, { "index" : 20, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }, "vscan" : { "minimum" : 0.2000, "maximum" : 0.2667 } }, { "index" : 21, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }, "vscan" : { "minimum" : 0.1333, "maximum" : 0.2000 } }, { "index" : 22, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }, "vscan" : { "minimum" : 0.0667, "maximum" : 0.1333 } }, { "index" : 23, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0667 } }, { "index" : 24, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0345 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 25, "hscan" : { "minimum" : 0.0345, "maximum" : 0.0690 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 26, "hscan" : { "minimum" : 0.0690, "maximum" : 0.1034 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 27, "hscan" : { "minimum" : 0.1034, "maximum" : 0.1379 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 28, "hscan" : { "minimum" : 0.1379, "maximum" : 0.1724 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 29, "hscan" : { "minimum" : 0.1724, "maximum" : 0.2069 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 30, "hscan" : { "minimum" : 0.2069, "maximum" : 0.2414 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 31, "hscan" : { "minimum" : 0.2414, "maximum" : 0.2759 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 32, "hscan" : { "minimum" : 0.2759, "maximum" : 0.3103 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 33, "hscan" : { "minimum" : 0.3103, "maximum" : 0.3448 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 34, "hscan" : { "minimum" : 0.3448, "maximum" : 0.3793 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 35, "hscan" : { "minimum" : 0.3793, "maximum" : 0.4138 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 36, "hscan" : { "minimum" : 0.4138, "maximum" : 0.4483 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 37, "hscan" : { "minimum" : 0.4483, "maximum" : 0.4828 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 38, "hscan" : { "minimum" : 0.4828, "maximum" : 0.5172 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 39, "hscan" : { "minimum" : 0.5172, "maximum" : 0.5517 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 40, "hscan" : { "minimum" : 0.5517, "maximum" : 0.5862 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 41, "hscan" : { "minimum" : 0.5862, "maximum" : 0.6207 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 42, "hscan" : { "minimum" : 0.6207, "maximum" : 0.6552 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 43, "hscan" : { "minimum" : 0.6552, "maximum" : 0.6897 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 44, "hscan" : { "minimum" : 0.6897, "maximum" : 0.7241 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 45, "hscan" : { "minimum" : 0.7241, "maximum" : 0.7586 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 46, "hscan" : { "minimum" : 0.7586, "maximum" : 0.7931 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 47, "hscan" : { "minimum" : 0.7931, "maximum" : 0.8276 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 48, "hscan" : { "minimum" : 0.8276, "maximum" : 0.8621 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 49, "hscan" : { "minimum" : 0.8621, "maximum" : 0.8966 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 50, "hscan" : { "minimum" : 0.8966, "maximum" : 0.9310 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 51, "hscan" : { "minimum" : 0.9310, "maximum" : 0.9655 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 52, "hscan" : { "minimum" : 0.9655, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 53, "hscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0667 } }, { "index" : 54, "hscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.0667, "maximum" : 0.1333 } }, { "index" : 55, "hscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.1333, "maximum" : 0.2000 } }, { "index" : 56, "hscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.2000, "maximum" : 0.2667 } }, { "index" : 57, "hscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.2667, "maximum" : 0.3333 } }, { "index" : 58, "hscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.3333, "maximum" : 0.4000 } }, { "index" : 59, "hscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.4000, "maximum" : 0.4667 } }, { "index" : 60, "hscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.4667, "maximum" : 0.5333 } }, { "index" : 61, "hscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.5333, "maximum" : 0.6000 } }, { "index" : 62, "hscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.6000, "maximum" : 0.6667 } }, { "index" : 63, "hscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.6667, "maximum" : 0.7333 } }, { "index" : 64, "hscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.7333, "maximum" : 0.8000 } }, { "index" : 65, "hscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.8000, "maximum" : 0.8667 } }, { "index" : 66, "hscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.8667, "maximum" : 0.9333 } }, { "index" : 67, "hscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.9333, "maximum" : 1.0000 } }, { "index" : 68, "hscan" : { "minimum" : 0.9655, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 69, "hscan" : { "minimum" : 0.9310, "maximum" : 0.9655 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 70, "hscan" : { "minimum" : 0.8966, "maximum" : 0.9310 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 71, "hscan" : { "minimum" : 0.8621, "maximum" : 0.8966 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 72, "hscan" : { "minimum" : 0.8276, "maximum" : 0.8621 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 73, "hscan" : { "minimum" : 0.7931, "maximum" : 0.8276 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 74, "hscan" : { "minimum" : 0.7586, "maximum" : 0.7931 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 75, "hscan" : { "minimum" : 0.7241, "maximum" : 0.7586 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 76, "hscan" : { "minimum" : 0.6897, "maximum" : 0.7241 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } } ], "endOfJson" : "endOfJson" }I test with "RASPBIAN STRETCH WITH DESKTOP" and "RASPBIAN STRETCH LITE". Each with a different SD card. I activated SPI via "sudo raspi-config".
Does anyone have an idea what it can be? Thanks in advance.
What do you use ? If Raspbian change it to OSMC , it helped me because i have same issue "Hyperion only works if I stop and start hyperion with HyperCon"
-
The various init (autostart) scripts that hyperion tries to install are located here. [ https://github.com/hyperion-pr…n/tree/master/bin/service ] one of the scripts should have been added to your init system directory. If not, somethings a miss. Try reinstall?
i just instaled OSMC and all is fine =))) , with rasbpian not working
-
To turn on and off i used reley on 5v and rf remote ( it is not good for sd card , but now i have remote =)))
1)rpi zero w([COLOR=rgb(255, 77, 77)]https://ru.aliexpress.com/item…07109e4&priceBeautifyAB=0)2)hdmi to av[/COLOR] (https://ru.aliexpress.com/item…=a2g0s.9042311.0.0.Mlaez8 )
3)apa 102 (https://ru.aliexpress.com/item…33-4165-a9fc-dfe216d72c61 )
4)utv007 ([COLOR=rgb(255, 77, 77)]https://ru.aliexpress.com/item…=a2g0s.9042311.0.0.DvSAlc )5)hdmi splitter 4k (https://ru.aliexpress.com/item…ae803_1&priceBeautifyAB=0)[/COLOR]
6) power 5v 10a ([COLOR=rgb(255, 77, 77)]https://ru.aliexpress.com/item…a-b75f-5358441177b9&tpp=1)[/COLOR]
7) 4 pin connector (i like it =)) )
https://ru.aliexpress.com/item…042311.0.0.274233ed11hYSm
8)hdmi corner (https://ru.aliexpress.com/item/Ugreen-HDMI-male-to-HDMI-female-cable-adapter-converter-extender-90-degree-angle-270-degree-angle/32403914176.html?spm=a2g0v.10010108.1000014.4.59271447YLw8s4&scm=1007.13338.98644.000000000000000&scm_id=1007.13338.98644.000000000000000&scm-url=1007.13338.98644.000000000000000&pvid=ecf1ec2e-b74a-467e-a39f-66ff76e95872&_t=pvid:ecf1ec2e-b74a-467e-a39f-66ff76e95872,scm-url:1007.13338.98644.000000000000000 )
9)hdmi 15 cm (left to left) ( https://ru.aliexpress.com/item…ae803_1&priceBeautifyAB=0)
10)rf remote (https://ru.aliexpress.com/item…6-bef6-6f998b9c1cc4&tpp=1)
11) rf reley ( i used this pcb but only changed relay to 5 vand soldered on resistor smd 221 another resistor smd 301( see on photo) , or you can put only about 600 ohm smd , because with stock resistor when strip turns on reley switches off) https://ru.aliexpress.com/item…042311.0.0.274233edI9JJR612)reley 5v (https://ru.aliexpress.com/item…042311.0.0.51e933edIVCgNd )
13) resistor smd 301 (https://ru.aliexpress.com/item…ae803_2&priceBeautifyAB=0 )
268 led
-
Same thing ((
-
The various init (autostart) scripts that hyperion tries to install are located here. [ https://github.com/hyperion-pr…n/tree/master/bin/service ] one of the scripts should have been added to your init system directory. If not, somethings a miss. Try reinstall?
Thank you i will try ) . But question , is it normal that it starts only when i press start-stop-start , not only Start ?? -
Hello , i want to know , Does must strip('hyperion') work when i turn power ? ,does it have autostart ?., and it is normal that it starts only when i press start-stop-start ????? (Rpi zero w - apa102 -raspbian)
