Why do you have to open multiple threads with the same issues?
https://hyperion-project.org/t…t-consistant.11388/unread
I can close one. Wasn’t sure which area to ask.
Why do you have to open multiple threads with the same issues?
https://hyperion-project.org/t…t-consistant.11388/unread
I can close one. Wasn’t sure which area to ask.
Needed the power usb. No have some color issues.
New setup. 2 ws2812b leds connected in series. The led direction is counter clockwise starting at the top middle. First 150 leds blue is purple. 2nd half is fine. The splice of the 2 led chains is where the color corrects.
I am getting close to a completed project. I have a 130" projector screen. See video and pics, it's close. But the colors seem off. In the single picture notice the top left is more purple while the top right is blue. The power comes in the top middle and the strip goes left down right up left (aka counterclockwise). Its 2 strips connected WS2812b
Its not, I have purchased one and will try that. It needs to run the audrino and capture card.
Bought a new pi zero W to use with Hyperbain and the USB hub it came with sometimes is detected otherwise it is not. What could be the issue. If I plug in a device or remove the PI loses WIFI access and I have to restart.
I am starting a home theater and really want to incorporate this into my system. My screen is going to be 135". I can't seem to find any good tutorials about the proper setup at this length? I feel it is doable with the right power sources etc. However, not really finding any good info.