Problem gefunden. Erster LED Streifen war defekt läuft wieder
Beiträge von TheIngsten
-
-
ich habe jetzt mal umgestellt auf omsc und weiter das gleiche.
Das spuckt er aus wenn ich Spidev testen will
Code
Alles anzeigenosmc@osmc:~$ wget https://raw.githubusercontent.com/raspberrypi/linux/rpi-3.10.y/Documentation/spi/spidev_test.c --2019-05-09 21:14:21-- https://raw.githubusercontent.com/raspberrypi/linux/rpi-3.10.y/Documentation/spi/spidev_test.c Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.112.133 Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.112.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 4410 (4.3K) [text/plain] Saving to: 'spidev_test.c.1' spidev_test.c.1 100%[=================================================>] 4.31K --.-KB/s in 0s 2019-05-09 21:14:21 (11.3 MB/s) - 'spidev_test.c.1' saved [4410/4410] osmc@osmc:~$ gcc -o spidev_test spidev_test.c -bash: gcc: command not foundEDIT:
Hier nochmal ein Auszug aus meinem Hypercon Log:
Code
Alles anzeigenssh in: -- Logs begin at Thu 2016-11-03 18:16:42 CET, end at Thu 2019-05-09 21:49:44 CEST. -- ssh in: May 09 21:46:00 osmc systemd[1]: Started Hyperion Systemd service. ssh in: May 09 21:46:01 osmc hyperiond[334]: Hyperion Ambilight Deamon (334) ssh in: May 09 21:46:01 osmc hyperiond[334]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: May 09 21:46:01 osmc hyperiond[334]: Build Time: Apr 5 2018 01:57:25 ssh in: May 09 21:46:02 osmc hyperiond[334]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json ssh in: May 09 21:46:02 osmc hyperiond[334]: HYPERION INFO: ColorTransform 'default' => [0; 103] ssh in: May 09 21:46:02 osmc hyperiond[334]: HYPERION INFO: ColorCorrection 'default' => [0; 103] ssh in: May 09 21:46:02 osmc hyperiond[334]: HYPERION INFO: ColorAdjustment 'default' => [0; 103] ssh in: May 09 21:46:02 osmc hyperiond[334]: LEDDEVICE INFO: configuration: ssh in: May 09 21:46:02 osmc hyperiond[334]: { ssh in: May 09 21:46:02 osmc hyperiond[334]: "colorOrder" : "rgb", ssh in: May 09 21:46:02 osmc hyperiond[334]: "name" : "Ambilight", ssh in: May 09 21:46:02 osmc hyperiond[334]: "output" : "/dev/spidev0.0", ssh in: May 09 21:46:02 osmc hyperiond[334]: "rate" : 1000000, ssh in: May 09 21:46:02 osmc hyperiond[334]: "type" : "ws2801" ssh in: May 09 21:46:02 osmc hyperiond[334]: } ssh in: May 09 21:46:02 osmc hyperiond[334]: INFO: Creating linear smoothing ssh in: May 09 21:46:02 osmc hyperiond[334]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0 ssh in: May 09 21:46:02 osmc hyperiond[334]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects ssh in: May 09 21:46:02 osmc hyperiond[334]: EFFECTENGINE INFO: Initializing Python interpreter ssh in: May 09 21:46:02 osmc hyperiond[334]: INFO: Hyperion started and initialised ssh in: May 09 21:46:02 osmc hyperiond[334]: INFO: Boot sequence 'Police Lights Solid' EFFECTENGINE INFO: run effect Police Lights Solid on channel 0 ssh in: May 09 21:46:02 osmc hyperiond[334]: BLACKBORDER INFO: threshold set to 0.1 (26) ssh in: May 09 21:46:02 osmc hyperiond[334]: BLACKBORDER INFO: mode:default ssh in: May 09 21:46:02 osmc hyperiond[334]: started ssh in: May 09 21:46:02 osmc hyperiond[334]: INFO: Kodi checker created and started ssh in: May 09 21:46:02 osmc hyperiond[334]: INFO: Json server created and started on port 19444 ssh in: May 09 21:46:02 osmc hyperiond[334]: INFO: Proto server created and started on port 19445 ssh in: May 09 21:46:02 osmc hyperiond[334]: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080 ssh in: May 09 21:46:02 osmc hyperiond[334]: BLACKBORDER INFO: threshold set to 0.1 (26) ssh in: May 09 21:46:02 osmc hyperiond[334]: BLACKBORDER INFO: mode:default ssh in: May 09 21:46:02 osmc hyperiond[334]: INFO: Frame grabber created and started ssh in: May 09 21:46:02 osmc hyperiond[334]: KODICHECK ERROR: Kodi Connection error (0) ssh in: May 09 21:46:02 osmc hyperiond[334]: BORDER SWITCH REQUIRED!! ssh in: May 09 21:46:02 osmc hyperiond[334]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0 ssh in: May 09 21:46:05 osmc hyperiond[334]: EFFECTENGINE INFO: effect finished ssh in: May 09 21:46:22 osmc hyperiond[334]: KODICHECK INFO: Kodi Connected ssh in: May 09 21:46:22 osmc hyperiond[334]: KODICHECK INFO: switching to MENU mode -
Btw. Ich benutze libreelec
-
Hab ich gestern schon versuchtversuch. Der sagt mir dann gcc nicht gefunden. Aber der rasp ist neu gestern angekommen
-
Kann keiner helfen ?
-
Die LED's leuchten zwar nicht alle aber ein paar, allerdings nur durch die rohe stromversorgung des netzteils . ich habe ehrlich keine ahnung mehr was ich tun soll
-
Code
Alles anzeigenSSH Traffic: ssh connected ssh out: cat /storage/logfiles/hyperion.log ssh in: Hyperion Ambilight Deamon (380) ssh in: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: Build Time: Apr 5 2018 01:57:25 ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json ssh in: HYPERION INFO: ColorTransform 'default' => [0; 104] ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 104] ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 104] ssh in: LEDDEVICE INFO: configuration: ssh in: { ssh in: "colorOrder" : "rgb", ssh in: "name" : "MyHyperionConfig", ssh in: "output" : "/dev/spidev0.0", ssh in: "rate" : 250000, ssh in: "type" : "ws2801" ssh in: } ssh in: HYPERION INFO: Json forward to 127.0.0.1:19446 ssh in: HYPERION INFO: Proto forward to 127.0.0.1:19447 ssh in: INFO: Creating linear smoothing ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0 ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects ssh in: EFFECTENGINE INFO: Initializing Python interpreter ssh in: INFO: Hyperion started and initialised ssh in: INFO: Boot sequence 'Police Lights Solid' EFFECTENGINE INFO: run effect Police Lights Solid on channel 0 ssh in: BLACKBORDER INFO: threshold set to 0.05 (13) ssh in: BLACKBORDER INFO: mode:default ssh in: started ssh in: INFO: Kodi checker created and started ssh in: terminate called after throwing an instance of 'std::runtime_error' ssh in: what(): JSONSERVER ERROR: could not bind to port ssh in: Aborted ssh out: /storage/.config/autostart.sh > /dev/null 2>&1 & ssh out: /storage/hyperion/bin/hyperion-remote.sh -c ca60ff ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 202 96 255 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 3f65ff ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 63 101 255 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 18ffea ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 24 255 234 sftp Send Hyperion Config - Sourcepath: C:/Users/Ingsten/Desktop, Targetpath: /storage/.config/, Filename: hyperion.config.json ssh out: /storage/hyperion/bin/hyperion-remote.sh -c a0ffbf ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 160 255 191 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 78ff5e ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 120 255 94 sftp Send Hyperion Config - Sourcepath: C:/Users/Ingsten/Desktop, Targetpath: /storage/.config/, Filename: hyperion.config.json ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 6875ff ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 104 117 255 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c ff73f9 ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 255 115 249 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 5dff2d ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 93 255 45 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 36b8ff ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 54 184 255 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 9481ff ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 148 129 255 ssh disconnected ssh connected ssh out: cat /storage/logfiles/hyperion.log ssh in: Hyperion Ambilight Deamon (345) ssh in: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: Build Time: Apr 5 2018 01:57:25 ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json ssh in: HYPERION INFO: ColorTransform 'default' => [0; 104] ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 104] ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 104] ssh in: LEDDEVICE INFO: configuration: ssh in: { ssh in: "colorOrder" : "rgb", ssh in: "name" : "MyHyperionConfig", ssh in: "output" : "/dev/spidev0.0", ssh in: "rate" : 1000000, ssh in: "type" : "ws2801" ssh in: } ssh in: HYPERION INFO: Json forward to 127.0.0.1:19446 ssh in: HYPERION INFO: Proto forward to 127.0.0.1:19447 ssh in: INFO: Creating linear smoothing ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0 ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects ssh in: EFFECTENGINE INFO: Initializing Python interpreter ssh in: INFO: Hyperion started and initialised ssh in: INFO: Boot sequence 'Police Lights Solid' EFFECTENGINE INFO: run effect Police Lights Solid on channel 0 ssh in: BLACKBORDER INFO: threshold set to 0.05 (13) ssh in: BLACKBORDER INFO: mode:default ssh in: started ssh in: INFO: Kodi checker created and started ssh in: terminate called after throwing an instance of 'std::runtime_error' ssh in: what(): JSONSERVER ERROR: could not bind to port ssh in: Aborted ssh out: /storage/.config/autostart.sh > /dev/null 2>&1 & ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 2ea9ff ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 46 169 255 sftp Send Hyperion Config - Sourcepath: C:/Users/Ingsten/Desktop, Targetpath: /storage/.config/, Filename: hyperion.config.json ssh out: /storage/hyperion/bin/hyperion-remote.sh -c a2ffb3 ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 162 255 179 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c adff6a ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 173 255 106 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c eeff4d ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 238 255 77 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c ffd2ba ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 255 210 186 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c b0afff ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 176 175 255 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 6280ff ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 98 128 255 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 7746ff ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 119 70 255 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c ff9cdf ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 255 156 223 sftp Send Hyperion Config - Sourcepath: C:/Users/Ingsten/Desktop, Targetpath: /storage/.config/, Filename: hyperion.config.json ssh disconnected ssh connected ssh out: killall hyperiond 2>/dev/null sftp Send Hyperion Config - Sourcepath: C:/Users/Ingsten/Desktop, Targetpath: /storage/.config/, Filename: hyperion.config.json ssh disconnected ssh connected ssh out: /storage/.config/autostart.sh > /dev/null 2>&1 & ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 876bff ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 135 107 255 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 9effec ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 158 255 236 sftp Send Hyperion Config - Sourcepath: C:/Users/Ingsten/Desktop, Targetpath: /storage/.config/, Filename: hyperion.config.json ssh disconnected ssh connected ssh out: killall hyperiond 2>/dev/null sftp Send Hyperion Config - Sourcepath: C:/Users/Ingsten/Desktop, Targetpath: /storage/.config/, Filename: hyperion.config.json ssh out: /storage/.config/autostart.sh > /dev/null 2>&1 & ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 9e8fff ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 158 143 255 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c aac5ff ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 170 197 255 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 27ffc6 ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 39 255 198 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 2eff36 ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 46 255 54 ssh disconnected ssh connected ssh out: cat /storage/logfiles/hyperion.log ssh in: Hyperion Ambilight Deamon (439) ssh in: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: Build Time: Apr 5 2018 01:57:25 ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json ssh in: HYPERION INFO: ColorTransform 'default' => [0; 103] ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 103] ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 103] ssh in: LEDDEVICE INFO: configuration: ssh in: { ssh in: "colorOrder" : "rgb", ssh in: "name" : "MyHyperionConfig", ssh in: "output" : "/dev/spidev0.0", ssh in: "rate" : 250000, ssh in: "type" : "ws2801" ssh in: } ssh in: INFO: Creating linear smoothing ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0 ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects ssh in: EFFECTENGINE INFO: Initializing Python interpreter ssh in: INFO: Hyperion started and initialised ssh in: INFO: Boot sequence 'Strobe blue' EFFECTENGINE INFO: run effect Strobe blue on channel 0 ssh in: BLACKBORDER INFO: threshold set to 0.05 (13) ssh in: BLACKBORDER INFO: mode:default ssh in: started ssh in: INFO: Kodi checker created and started ssh in: INFO: Json server created and started on port 19444 ssh in: INFO: Proto server created and started on port 19445 ssh in: INFO: Boblight server created and started on port 19333 ssh in: KODICHECK INFO: Kodi Connected ssh in: KODICHECK INFO: switching to MENU mode ssh in: JSONSERVER INFO: New connection ssh in: BLACKBORDER INFO: threshold set to 0.05 (13) ssh in: BLACKBORDER INFO: mode:default ssh in: JSONSERVER INFO: Connection closed ssh in: EFFECTENGINE INFO: effect finished ssh in: JSONSERVER INFO: New connection ssh in: BLACKBORDER INFO: threshold set to 0.05 (13) ssh in: BLACKBORDER INFO: mode:default ssh in: JSONSERVER INFO: Connection closed ssh in: JSONSERVER INFO: New connection ssh in: BLACKBORDER INFO: threshold set to 0.05 (13) ssh in: BLACKBORDER INFO: mode:default ssh in: JSONSERVER INFO: Connection closed ssh in: JSONSERVER INFO: New connection ssh in: BLACKBORDER INFO: threshold set to 0.05 (13) ssh in: BLACKBORDER INFO: mode:default ssh in: JSONSERVER INFO: Connection closed ssh out: killall hyperiond 2>/dev/null sftp Send Hyperion Config - Sourcepath: C:/Users/Ingsten/Desktop, Targetpath: /storage/.config/, Filename: hyperion.config.json ssh out: /storage/.config/autostart.sh > /dev/null 2>&1 & ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 59c3ff ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 89 195 255 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 59c3ff ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 89 195 255 ssh out: /storage/hyperion/bin/hyperion-remote.sh -c e2ff00 ssh in: hyperion-remote: ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: build time: Apr 5 2018 01:57:05 ssh in: Connected to localhost:19444 ssh in: Set color to 226 255 0 ssh disconnected ssh connected ssh disconnected ssh connected ssh out: /storage/.config/autostart.sh > /dev/null 2>&1 & ssh out: cat /storage/logfiles/hyperion.log ssh in: Hyperion Ambilight Deamon (508) ssh in: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225 ssh in: Build Time: Apr 5 2018 01:57:25 ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json ssh in: HYPERION INFO: ColorTransform 'default' => [0; 103] ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 103] ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 103] ssh in: LEDDEVICE INFO: configuration: ssh in: { ssh in: "colorOrder" : "rgb", ssh in: "name" : "MyHyperionConfig", ssh in: "output" : "/dev/spidev0.0", ssh in: "rate" : 250000, ssh in: "type" : "ws2801" ssh in: } ssh in: HYPERION INFO: Json forward to 127.0.0.1:19446 ssh in: HYPERION INFO: Proto forward to 127.0.0.1:19447 ssh in: INFO: Creating linear smoothing ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0 ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects ssh in: EFFECTENGINE INFO: Initializing Python interpreter ssh in: INFO: Hyperion started and initialised ssh in: INFO: Boot sequence 'Police Lights Solid' EFFECTENGINE INFO: run effect Police Lights Solid on channel 0 ssh in: BLACKBORDER INFO: threshold set to 0.05 (13) ssh in: BLACKBORDER INFO: mode:default ssh in: started ssh in: INFO: Kodi checker created and started ssh in: terminate called after throwing an instance of 'std::runtime_error' ssh in: what(): JSONSERVER ERROR: could not bind to port ssh in: Aborted ssh in:
So also neuer rasp geholt hab meinen alten abgeschossen sd karte konnte net mehr gelesen werden ssh sagt folgendes: -
Im moment nix mehr glaube der pi is abgeraucht wollte nochmal neu aufsetzen jetzt leuchtet nur die rote led am Pi und lädt nicht mehr .
Vorher hat er alles wunderbar laut log gemacht ausgabe für effect war erfolgreich farben konnte man senden .
-
Nicht wundern der Externe grabber ist derzeit abgeschaltet wegen unable to connect to host
-
Code
Alles anzeigen// Automatically generated configuration file for Hyperion ambilight daemon // Notice: All values are explained with comments at our wiki: wiki.hyperion-project.org (config area) // Generated by: HyperCon (The Hyperion deamon configuration file builder) // Created with HyperCon V1.03.3 (22.10.2017) { // DEVICE CONFIGURATION "device" : { "name" : "MyHyperionConfig", "type" : "ws2801", "output" : "/dev/spidev0.0", "rate" : 250000, "colorOrder" : "rgb" }, // COLOR CALIBRATION CONFIG "color" : { "channelAdjustment" : [ { "id" : "default", "leds" : "*", "pureRed" : { "redChannel" : 255, "greenChannel" : 0, "blueChannel" : 0 }, "pureGreen" : { "redChannel" : 0, "greenChannel" : 255, "blueChannel" : 0 }, "pureBlue" : { "redChannel" : 0, "greenChannel" : 0, "blueChannel" : 255 } } ], "temperature" : [ { "id" : "default", "leds" : "*", "correctionValues" : { "red" : 255, "green" : 255, "blue" : 255 } } ], "transform" : [ { "id" : "default", "leds" : "*", "hsl" : { "saturationGain" : 1.0000, "luminanceGain" : 1.0000, "luminanceMinimum" : 0.0000 }, "red" : { "threshold" : 0.0000, "gamma" : 2.5000 }, "green" : { "threshold" : 0.0000, "gamma" : 2.5000 }, "blue" : { "threshold" : 0.0000, "gamma" : 2.5000 } } ], // SMOOTHING CONFIG "smoothing" : { "type" : "linear", "time_ms" : 200, "updateFrequency" : 20.0000, "updateDelay" : 0 } }, // NO V4L2 GRABBER CONFIG // FRAME GRABBER CONFIG "framegrabber" : { "width" : 64, "height" : 64, "frequency_Hz" : 10.0, "priority" : 890 }, // BLACKBORDER CONFIG "blackborderdetector" : { "enable" : true, "threshold" : 0.05, "unknownFrameCnt" : 600, "borderFrameCnt" : 50, "maxInconsistentCnt" : 10, "blurRemoveCnt" : 1, "mode" : "default" }, // BOOTEFFECT CONFIG "bootsequence" : { "color" : [0,0,0], "effect" : "Police Lights Solid", "duration_ms" : 3000, "priority" : 700 }, // JSON SERVER CONFIG "jsonServer" : { "port" : 19444 }, // PROTO SERVER CONFIG "protoServer" : { "port" : 19445 }, // BOBLIGHT SERVER CONFIG "boblightServer" : { "port" : 19333, "priority" : 900 }, // JSON/PROTO FORWARD CONFIG "forwarder" : { "json" : ["127.0.0.1:19446"], "proto" : ["127.0.0.1:19447"] }, // EFFECT PATH "effects" : { "paths" : [ "/storage/hyperion/effects", "/usr/share/hyperion/effects" ] }, // NO KODI CHECK CONFIG // LED CONFIGURATION "leds" : [ { "index" : 0, "hscan" : { "minimum" : 0.6389, "maximum" : 0.6667 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 1, "hscan" : { "minimum" : 0.6667, "maximum" : 0.6944 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 2, "hscan" : { "minimum" : 0.6944, "maximum" : 0.7222 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 3, "hscan" : { "minimum" : 0.7222, "maximum" : 0.7500 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 4, "hscan" : { "minimum" : 0.7500, "maximum" : 0.7778 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 5, "hscan" : { "minimum" : 0.7778, "maximum" : 0.8056 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 6, "hscan" : { "minimum" : 0.8056, "maximum" : 0.8333 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 7, "hscan" : { "minimum" : 0.8333, "maximum" : 0.8611 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 8, "hscan" : { "minimum" : 0.8611, "maximum" : 0.8889 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 9, "hscan" : { "minimum" : 0.8889, "maximum" : 0.9167 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 10, "hscan" : { "minimum" : 0.9167, "maximum" : 0.9444 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 11, "hscan" : { "minimum" : 0.9444, "maximum" : 0.9722 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 12, "hscan" : { "minimum" : 0.9722, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 13, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.9524, "maximum" : 1.0000 } }, { "index" : 14, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.9048, "maximum" : 0.9524 } }, { "index" : 15, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.8571, "maximum" : 0.9048 } }, { "index" : 16, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.8095, "maximum" : 0.8571 } }, { "index" : 17, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.7619, "maximum" : 0.8095 } }, { "index" : 18, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.7143, "maximum" : 0.7619 } }, { "index" : 19, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.6667, "maximum" : 0.7143 } }, { "index" : 20, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.6190, "maximum" : 0.6667 } }, { "index" : 21, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.5714, "maximum" : 0.6190 } }, { "index" : 22, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.5238, "maximum" : 0.5714 } }, { "index" : 23, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.4762, "maximum" : 0.5238 } }, { "index" : 24, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.4286, "maximum" : 0.4762 } }, { "index" : 25, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.3810, "maximum" : 0.4286 } }, { "index" : 26, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.3333, "maximum" : 0.3810 } }, { "index" : 27, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.2857, "maximum" : 0.3333 } }, { "index" : 28, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.2381, "maximum" : 0.2857 } }, { "index" : 29, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.1905, "maximum" : 0.2381 } }, { "index" : 30, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.1429, "maximum" : 0.1905 } }, { "index" : 31, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.0952, "maximum" : 0.1429 } }, { "index" : 32, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.0476, "maximum" : 0.0952 } }, { "index" : 33, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0476 } }, { "index" : 34, "hscan" : { "minimum" : 0.9722, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 35, "hscan" : { "minimum" : 0.9444, "maximum" : 0.9722 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 36, "hscan" : { "minimum" : 0.9167, "maximum" : 0.9444 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 37, "hscan" : { "minimum" : 0.8889, "maximum" : 0.9167 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 38, "hscan" : { "minimum" : 0.8611, "maximum" : 0.8889 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 39, "hscan" : { "minimum" : 0.8333, "maximum" : 0.8611 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 40, "hscan" : { "minimum" : 0.8056, "maximum" : 0.8333 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 41, "hscan" : { "minimum" : 0.7778, "maximum" : 0.8056 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 42, "hscan" : { "minimum" : 0.7500, "maximum" : 0.7778 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 43, "hscan" : { "minimum" : 0.7222, "maximum" : 0.7500 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 44, "hscan" : { "minimum" : 0.6944, "maximum" : 0.7222 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 45, "hscan" : { "minimum" : 0.6667, "maximum" : 0.6944 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 46, "hscan" : { "minimum" : 0.6389, "maximum" : 0.6667 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 47, "hscan" : { "minimum" : 0.6111, "maximum" : 0.6389 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 48, "hscan" : { "minimum" : 0.5833, "maximum" : 0.6111 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 49, "hscan" : { "minimum" : 0.5556, "maximum" : 0.5833 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 50, "hscan" : { "minimum" : 0.5278, "maximum" : 0.5556 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 51, "hscan" : { "minimum" : 0.5000, "maximum" : 0.5278 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 52, "hscan" : { "minimum" : 0.4722, "maximum" : 0.5000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 53, "hscan" : { "minimum" : 0.4444, "maximum" : 0.4722 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 54, "hscan" : { "minimum" : 0.4167, "maximum" : 0.4444 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 55, "hscan" : { "minimum" : 0.3889, "maximum" : 0.4167 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 56, "hscan" : { "minimum" : 0.3611, "maximum" : 0.3889 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 57, "hscan" : { "minimum" : 0.3333, "maximum" : 0.3611 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 58, "hscan" : { "minimum" : 0.3056, "maximum" : 0.3333 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 59, "hscan" : { "minimum" : 0.2778, "maximum" : 0.3056 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 60, "hscan" : { "minimum" : 0.2500, "maximum" : 0.2778 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 61, "hscan" : { "minimum" : 0.2222, "maximum" : 0.2500 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 62, "hscan" : { "minimum" : 0.1944, "maximum" : 0.2222 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 63, "hscan" : { "minimum" : 0.1667, "maximum" : 0.1944 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 64, "hscan" : { "minimum" : 0.1389, "maximum" : 0.1667 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 65, "hscan" : { "minimum" : 0.1111, "maximum" : 0.1389 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 66, "hscan" : { "minimum" : 0.0833, "maximum" : 0.1111 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 67, "hscan" : { "minimum" : 0.0556, "maximum" : 0.0833 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 68, "hscan" : { "minimum" : 0.0278, "maximum" : 0.0556 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 69, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0278 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 70, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0476 } }, { "index" : 71, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.0476, "maximum" : 0.0952 } }, { "index" : 72, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.0952, "maximum" : 0.1429 } }, { "index" : 73, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.1429, "maximum" : 0.1905 } }, { "index" : 74, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.1905, "maximum" : 0.2381 } }, { "index" : 75, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.2381, "maximum" : 0.2857 } }, { "index" : 76, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.2857, "maximum" : 0.3333 } }, { "index" : 77, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.3333, "maximum" : 0.3810 } }, { "index" : 78, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.3810, "maximum" : 0.4286 } }, { "index" : 79, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.4286, "maximum" : 0.4762 } }, { "index" : 80, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.4762, "maximum" : 0.5238 } }, { "index" : 81, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.5238, "maximum" : 0.5714 } }, { "index" : 82, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.5714, "maximum" : 0.6190 } }, { "index" : 83, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.6190, "maximum" : 0.6667 } }, { "index" : 84, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.6667, "maximum" : 0.7143 } }, { "index" : 85, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.7143, "maximum" : 0.7619 } }, { "index" : 86, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.7619, "maximum" : 0.8095 } }, { "index" : 87, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.8095, "maximum" : 0.8571 } }, { "index" : 88, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.8571, "maximum" : 0.9048 } }, { "index" : 89, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.9048, "maximum" : 0.9524 } }, { "index" : 90, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.9524, "maximum" : 1.0000 } }, { "index" : 91, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0278 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 92, "hscan" : { "minimum" : 0.0278, "maximum" : 0.0556 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 93, "hscan" : { "minimum" : 0.0556, "maximum" : 0.0833 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 94, "hscan" : { "minimum" : 0.0833, "maximum" : 0.1111 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 95, "hscan" : { "minimum" : 0.1111, "maximum" : 0.1389 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 96, "hscan" : { "minimum" : 0.1389, "maximum" : 0.1667 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 97, "hscan" : { "minimum" : 0.1667, "maximum" : 0.1944 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 98, "hscan" : { "minimum" : 0.1944, "maximum" : 0.2222 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 99, "hscan" : { "minimum" : 0.2222, "maximum" : 0.2500 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 100, "hscan" : { "minimum" : 0.2500, "maximum" : 0.2778 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 101, "hscan" : { "minimum" : 0.2778, "maximum" : 0.3056 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 102, "hscan" : { "minimum" : 0.3056, "maximum" : 0.3333 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 103, "hscan" : { "minimum" : 0.3333, "maximum" : 0.3611 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 104, "hscan" : { "minimum" : 0.3611, "maximum" : 0.3889 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } } ], "endOfJson" : "endOfJson" } -
Hallo zusammen , hab gestern meinen raspberry neu aufgesetzt weil mein ambilight vorher nicht mehr lief. Habe den anschluss an den Strip erneuert sprich neu die kabel angelötet. Dann librelec installiert einträge wie max usb power eingetragen in die config und dann hyperion installiert und config per ssh übertragen . Hyperion läuft auch ohne probleme ich kann farben senden alles top. Es werden aber keine LED's angesteuert bzw zum leuchten gebracht. Strom liegt an immer wieder leuchten ein paar LEDs. Und sobald die den externen grabber in hyperion einschalte und die config aktualisiere bekomm ich die meldung unable to connect to host. Ich bin mit meinem latein am ende.
-
Problem gelöst . Framegrabber aus der config gelöscht und es klappt
-
Ausprobiert ob es evtl am farbschema liegt anstatt rgb zb rbg ?
-
Also. Die LEDs funktionieren mit kodi ohne Probleme wenn ich beispielsweise youtube laufen lassen. Wenn dann externe Quellen kommen wie beispielsweise Sky oder chromcast sprechen die LEDs nicht auf das Signal an. Der video grabber fushicai chipsatz funktioniert. Konnte ein Bild mittel screenshot für das croppen in hyperion machen. Die ganze kette bis raspberrypi3 scheint in Ordnung zu sein. Die hyperion config kann ich später mal hoch laden falls es für weitere eine fehlerlösung nötig ist.
Gruß