If I reduce my sketch to 255 LEDs speed is good... but I'm missing out on 45 LEDS, no one got a clue? I thought with ng it shouldn't be an issue with >255.
Any other thing I could try with my setup?`I'm not very confident when it comes to these things
Beiträge von mason
-
-
Sorry with prefix I meant for the threat subject. I somewhat read that the current hyperion need some kind of prefix for addressing more than several hundred leds which doesn't seem necessary for hyperion.ng. At least all my leds are addressed flawlessly but they are just to slow when it comes to syncing with media.
-
Sorry, there was no proper prefix for my issue...
-
Hey there,
just found out about hyperion and and tried to build a setup with a Vero4k+, and Arduino and a WS2812B LED stripe.
Thanks to some Anthrax in the OSMC forum I was able to compile a Hyperion.ng instance on the Vero4k+. (https://github.com/AnthraxLepr…aster/CompileHowtoOSMC.md)
I'm using a 300LED WS2812 for my 75" Samsung QLED with a 20A 5V power supply. So far it's working fine and looking good, but my problem is that it seems serial speed of the Arduino isn't capable of providing a proper framerate. I only might get 3-4 fps from it therefore it is lagging and no fun.
I tried to modify the sketch I used (https://github.com/hyperion-pr…ino/adalight/adalight.ino) to support more than 115200 baud.. but as soon as I increase the serial speed it stops working.
Anyone have an idea how to get a decent speed from this setup? Any help is much appreciated...
hyperion_main.json config https://privatebin.net/?5de413…KDy8JBJGXmrNecGxLmvcvzw0=