You are amazing!
It works perfectly
Thx a lot
Edit: I will mark as solved after a few test
You are amazing!
It works perfectly
Thx a lot
Edit: I will mark as solved after a few test
like this:
[MEDIA=pastebin]qU3thYjQ[/MEDIA]
Thx for continuing to help me !!!
Then, I don't know if I'm doing well...
Into Hypecon / hardware / type : Test (file)
Into Hypecon / hardware / Filename : /storage/output.txt
Into Hypecon / SSH : connect - stop - start wait 10s then stop
Nothing is created (no output.txt via scp)
I've created a file output.txt with 0777 permition, retry the test but noting is writen inside...
EDIT:
I've edited the files json and made the test!
the hyperion.json, or hardware config?
Hardware:
RPI4 4Go
Led WS2812B
External ac for led
json
[MEDIA=pastebin]2Tu6ma2z[/MEDIA]
the first file don't work here is the log:
ssh out: /storage/.config/autostart.sh > /dev/null 2>&1 &
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (592)
ssh in: Version : astina (GitHub-94404f6/8739c56-1565190225
ssh in: Build Time: Aug 7 2019 15:13:19
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 220]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 220]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 220]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "dmanum" : 5,
ssh in: "freq" : 800000,
ssh in: "gpio" : 12,
ssh in: "leds" : 221,
ssh in: "name" : "MyHyperionConfig",
ssh in: "pwmchannel" : 0,
ssh in: "type" : "ws281x"
ssh in: }
ssh in: whiteAlgorithm ::
ssh in: Unable to initialize ws281x library. Error code: -3
ssh in: terminate called after throwing an instance of 'int'
ssh in: Aborted
The second file made the rainbow swirl @ boot, I can use android app with colorwheel and Effect but no light during playing video, here is the log:
ssh out: /storage/.config/autostart.sh > /dev/null 2>&1 &
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (620)
ssh in: Version : astina (GitHub-94404f6/8739c56-1565190225
ssh in: Build Time: Aug 7 2019 15:19:56
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 220]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 220]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 220]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "dmanum" : 5,
ssh in: "freq" : 800000,
ssh in: "gpio" : 12,
ssh in: "leds" : 221,
ssh in: "name" : "MyHyperionConfig",
ssh in: "pwmchannel" : 0,
ssh in: "type" : "ws281x"
ssh in: }
ssh in: whiteAlgorithm ::
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Rainbow swirl' EFFECTENGINE INFO: run effect Rainbow swirl on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: BLACKBORDER INFO: mode:default
ssh in: started
ssh in: INFO: Kodi checker created and started
ssh in: INFO: Json server created and started on port 19444
ssh in: INFO: Proto server created and started on port 19445
ssh in: FRAMEBUFFERGRABBER INFO: opened with resolution: 1920x1080@32bit
ssh in: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: BLACKBORDER INFO: mode:default
ssh in: INFO: Framebuffer grabber created and started
ssh in: KODICHECK INFO: Kodi Connected
ssh in: KODICHECK INFO: switching to VIDEO mode
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
Ok I've made de transfert then reboot.
First led on red nothing else.
On hypercon, the result is:
ssh out: killall hyperiond 2>/dev/null
ssh out: /storage/.config/autostart.sh > /dev/null 2>&1 &
ssh out: cat /storage/logfiles/hyperion.log
ssh in: /storage/hyperion/bin/hyperiond: error while loading shared libraries: libpython3.5m.so.1.0: cannot open shared object file: No such file or directory
I'm continuing my research....
In hyperion.config.json, I've change "type" : "ws281x" into "type" : "ws2812spi"
Now I've not anymore the problem with library
I've also enable "allow remote control by programs on other systems" cause I had kodicheck error who's ok for now....
Even if I've no more error messages, nothing works....
Hello,
into the settings of libreelec the audio output is set on HDMI
Do I need to make some other stuff?
THX for replying
Edit 1: maybe add line to config.txt?
Edit 2: I've try to add "disable_audio_dither=1" in config.txt without effect...
Hello the community,
I have a config of hyperion who run fine on this setup:
Rpi2
Libreelec Leia last update
Config of hyperion with last hypercon
Now I want to change hardware to Rpi 4 4go
I've made the install of Leia then hyperion with last update (the same for rpi2)
I've made the copy of the json files to the folders.
But when I try to start hyperion with hypercon, I get the error:
Unable to initialize ws281x library.
Someone can help me please?
Sorry for my bad English....