Hallo zusammen,
ich habe ein Problem bei dem Tutorial Raspberry Pi 3 Mediacenter + Hyperion Ambilight + OHNE löten.
Ich habe alle Schritte (Verkabelung, RasPi mit OSMC) soweit hinbekommen, bis zu der Einrichtung und Konfiguration von Hyperion.
Ich habe die hyperion.config.json generiert und kann mich per SSH mit dem RasPi verbinden. Jetzt treten die ersten Probleme auf:
- Die Installation über den Button "Inst./akt. Hyperion" hat mehrere Anläufe gebraucht bis es funktioniert hat (oder nicht? Es sind viele "errors" in dem Log, siehe LOG unten)
- Die SSH Verbindung ist immer mal wieder abgebrochen bzw. Hyperion hat sich nach dem Klick auf einen Button aufgehangen
- Das senden der Konfiguration und start/stopp hat keine Reaktion an den LEDs gezeigt
Eine weitere komische Sache ist, das plötzlich und ohne das ich etwas gemacht hab einzelne LEDs angegangen sind (ca 3 Stück an verschiedenen Stellen, nicht nebeneinander) und erst wieder ausgegangen sind als ich den Strom der LEDs herausgezogen habe. Daraus schließe ich erstmal das die LEDs Strom haben und die Verkabelung grundlegend erstmal richtig sein müsste (oder?).
Diesen Effekt konnte ich nicht gezielt hervorrufen. Beim ersten mal sind die Lampen angegangen als ich den RasPi vom Strom getrennt und wieder eingesteckt habe.
Beim zweiten mal einfach so ohne Einwirken.
SSH Traffic:
ssh connected
ssh out: cd /tmp && wget -nv -N https://raw.github.com/hyperio…r/bin/install_hyperion.sh && chmod +x install_hyperion.sh && sudo sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
ssh out: Last-modified header missing -- time-stamps turned off.
ssh out: 2016-09-27 20:04:39 URL:https://raw.githubusercontent.…r/bin/install_hyperion.sh [14519/14519] -> "install_hyperion.sh" [1]
ssh in: *******************************************************************************
ssh in: This script will install/update Hyperion Ambient Light
ssh in: Created by brindosch - hyperion-project.org - the official Hyperion source.
ssh in: *******************************************************************************
ssh in: ---> Stop Hyperion, if necessary
ssh in: ---> Install/Update Hyperion dependencies (This may take a while)
ssh in: Setting up x11-common (1:7.7+7) ...
ssh in: debconf: unable to initialize frontend: Dialog
ssh in: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
ssh in: debconf: falling back to frontend: Readline
ssh in: debconf: unable to initialize frontend: Readline
ssh in: debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/arm-linux-gnueabihf/perl5/5.20 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
ssh in: debconf: falling back to frontend: Teletype
ssh in: /var/lib/dpkg/info/x11-common.postinst: 697: /var/lib/dpkg/info/x11-common.postinst: update-rc.d: not found
ssh in: dpkg: error processing package x11-common (--configure):
ssh in: subprocess installed post-installation script returned error exit status 127
ssh in: dpkg: dependency problems prevent configuration of libice6:armhf:
ssh in: libice6:armhf depends on x11-common; however:
ssh in: Package x11-common is not configured yet.
ssh in: dpkg: error processing package libice6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libsm6:armhf:
ssh in: libsm6:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: dpkg: error processing package libsm6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libxt6:armhf:
ssh in: libxt6:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: libxt6:armhf depends on libsm6; however:
ssh in: Package libsm6:armhf is not configured yet.
ssh in: dpkg: error processing package libxt6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libaudio2:armhf:
ssh in: libaudio2:armhf depends on libxt6; however:
ssh in: Package libxt6:armhf is not configured yet.
ssh in: dpkg: error processing package libaudio2:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libqtgui4:armhf:
ssh in: libqtgui4:armhf depends on libaudio2; however:
ssh in: Package libaudio2:armhf is not configured yet.
ssh in: libqtgui4:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: libqtgui4:armhf depends on libsm6; however:
ssh in: Package libsm6:armhf is not configured yet.
ssh in: dpkg: error processing package libqtgui4:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: Errors were encountered while processing:
ssh in: x11-common
ssh in: libice6:armhf
ssh in: libsm6:armhf
ssh in: libxt6:armhf
ssh in: libaudio2:armhf
ssh in: libqtgui4:armhf
ssh out: E: Sub-process /usr/bin/dpkg returned an error code (1)
ssh in: ---> Downloading the appropriate Hyperion release
ssh out: 2016-09-27 20:05:07 URL:http://netcologne.dl.sourcefor…hyperion_rpi2_osmc.tar.gz [1637006/1637006] -> "-" [1]
ssh in: ---> Installing systemd script
ssh in: ---> Modify systemd script for OSMC usage
ssh in: ---> Starting Hyperion
ssh in: *******************************************************************************
ssh in: Hyperion Installation/Update finished!
ssh in: Please download the latest HyperCon version to benefit from new features!
ssh in: To create a config, follow the HyperCon Guide at our Wiki (EN/DE)!
ssh in: Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org
ssh in: *******************************************************************************
ssh out: cd /tmp && wget -nv -N https://raw.github.com/hyperio…er/bin/remove_hyperion.sh && chmod +x remove_hyperion.sh && sudo sh ./remove_hyperion.sh HyperConRemove ; rm remove_hyperion.sh
ssh out: Last-modified header missing -- time-stamps turned off.
ssh out: 2016-09-27 20:09:41 URL:https://raw.githubusercontent.…er/bin/remove_hyperion.sh [4083/4083] -> "remove_hyperion.sh" [1]
ssh in: *******************************************************************************
ssh in: This script will remove Hyperion and it??s services
ssh in: -----> Please BACKUP your hyperion.config.json if necessary <-----
ssh in: Created by brindosch - hyperion-project.org - the official Hyperion source.
ssh in: *******************************************************************************
ssh in: ---> Stop Hyperion, if necessary
ssh in: ---> Delete and disable Hyperion systemd script
ssh out: Removed symlink /etc/systemd/system/multi-user.target.wants/hyperion.service.
ssh in: removed '/etc/systemd/system/hyperion.service'
ssh in: ---> Remove links to the binaries
ssh in: removed '/usr/bin/hyperiond'
ssh in: removed '/usr/bin/hyperion-remote'
ssh in: removed '/usr/bin/hyperion-v4l2'
ssh in: removed '/usr/bin/hyperion-dispmanx'
ssh in: removed '/usr/bin/hyperion-x11'
ssh in: removed '/usr/bin/hyperion-aml'
ssh in: ---> Remove binaries
ssh in: removed '/etc/hyperion/hyperion.config.json'
ssh in: removed directory: '/etc/hyperion'
ssh in: removed '/usr/share/hyperion/bin/hyperiond'
ssh in: removed '/usr/share/hyperion/bin/hyperion-dispmanx'
ssh in: removed '/usr/share/hyperion/bin/hyperion-v4l2'
ssh in: removed '/usr/share/hyperion/bin/hyperion-remote'
ssh in: removed directory: '/usr/share/hyperion/bin'
ssh in: removed '/usr/share/hyperion/effects/fade.py'
ssh in: removed '/usr/share/hyperion/effects/mood-blobs.py'
ssh in: removed '/usr/share/hyperion/effects/udp.py'
ssh in: removed '/usr/share/hyperion/effects/random.py'
ssh in: removed '/usr/share/hyperion/effects/police.py'
ssh in: removed '/usr/share/hyperion/effects/knight-rider.py'
ssh in: removed '/usr/share/hyperion/effects/mood-blobs-green.json'
ssh in: removed '/usr/share/hyperion/effects/police-lights-single.json'
ssh in: removed '/usr/share/hyperion/effects/mood-blobs-red.json'
ssh in: removed '/usr/share/hyperion/effects/cinema-fade-in.json'
ssh in: removed '/usr/share/hyperion/effects/rainbow-swirl.json'
ssh in: removed '/usr/share/hyperion/effects/strobe-white.json'
ssh in: removed '/usr/share/hyperion/effects/traces.py'
ssh in: removed '/usr/share/hyperion/effects/sparks-color.json'
ssh in: removed '/usr/share/hyperion/effects/sparks.json'
ssh in: removed '/usr/share/hyperion/effects/snake.json'
ssh in: removed '/usr/share/hyperion/effects/running_dots.py'
ssh in: removed '/usr/share/hyperion/effects/rainbow-mood.json'
ssh in: removed '/usr/share/hyperion/effects/traces.json'
ssh in: removed '/usr/share/hyperion/effects/knight-rider.json'
ssh in: removed '/usr/share/hyperion/effects/mood-blobs-cold.json'
ssh in: removed '/usr/share/hyperion/effects/mood-blobs-blue.json'
ssh in: removed '/usr/share/hyperion/effects/strobe-raspbmc.json'
ssh in: removed '/usr/share/hyperion/effects/police-lights-solid.json'
ssh in: removed '/usr/share/hyperion/effects/rainbow-swirl.py'
ssh in: removed '/usr/share/hyperion/effects/shutdown.json'
ssh in: removed '/usr/share/hyperion/effects/udp-mcast.json'
ssh in: removed '/usr/share/hyperion/effects/x-mas.py'
ssh in: removed '/usr/share/hyperion/effects/strobe.py'
ssh in: removed '/usr/share/hyperion/effects/mood-blobs-full.json'
ssh in: removed '/usr/share/hyperion/effects/mood-blobs-warm.json'
ssh in: removed '/usr/share/hyperion/effects/rainbow-mood.py'
ssh in: removed '/usr/share/hyperion/effects/sparks.py'
ssh in: removed '/usr/share/hyperion/effects/cinema-fade-off.json'
ssh in: removed '/usr/share/hyperion/effects/shutdown.py'
ssh in: removed '/usr/share/hyperion/effects/random.json'
ssh in: removed '/usr/share/hyperion/effects/x-mas.json'
ssh in: removed '/usr/share/hyperion/effects/strobe-blue.json'
ssh in: removed '/usr/share/hyperion/effects/rainbow-swirl-fast.json'
ssh in: removed '/usr/share/hyperion/effects/running_dots.json'
ssh in: removed '/usr/share/hyperion/effects/snake.py'
ssh in: removed '/usr/share/hyperion/effects/udp.json'
ssh in: removed directory: '/usr/share/hyperion/effects'
ssh in: removed '/usr/share/hyperion/config/hyperion.config.json.example'
ssh in: removed directory: '/usr/share/hyperion/config'
ssh in: removed directory: '/usr/share/hyperion'
ssh in: *******************************************************************************
ssh in: Hyperion successful removed!
ssh in: *******************************************************************************
ssh out: cd /tmp && wget -nv -N https://raw.github.com/hyperio…r/bin/install_hyperion.sh && chmod +x install_hyperion.sh && sudo sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
ssh out: Last-modified header missing -- time-stamps turned off.
ssh out: 2016-09-27 20:10:22 URL:https://raw.githubusercontent.…r/bin/install_hyperion.sh [14519/14519] -> "install_hyperion.sh" [1]
ssh in: *******************************************************************************
ssh in: This script will install/update Hyperion Ambient Light
ssh in: Created by brindosch - hyperion-project.org - the official Hyperion source.
ssh in: *******************************************************************************
ssh in: ---> Stop Hyperion, if necessary
ssh in: ---> Install/Update Hyperion dependencies (This may take a while)
ssh in: Setting up x11-common (1:7.7+7) ...
ssh in: debconf: unable to initialize frontend: Dialog
ssh in: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
ssh in: debconf: falling back to frontend: Readline
ssh in: debconf: unable to initialize frontend: Readline
ssh in: debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/arm-linux-gnueabihf/perl5/5.20 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
ssh in: debconf: falling back to frontend: Teletype
ssh in: /var/lib/dpkg/info/x11-common.postinst: 697: /var/lib/dpkg/info/x11-common.postinst: update-rc.d: not found
ssh in: dpkg: error processing package x11-common (--configure):
ssh in: subprocess installed post-installation script returned error exit status 127
ssh in: dpkg: dependency problems prevent configuration of libice6:armhf:
ssh in: libice6:armhf depends on x11-common; however:
ssh in: Package x11-common is not configured yet.
ssh in: dpkg: error processing package libice6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libsm6:armhf:
ssh in: libsm6:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: dpkg: error processing package libsm6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libxt6:armhf:
ssh in: libxt6:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: libxt6:armhf depends on libsm6; however:
ssh in: Package libsm6:armhf is not configured yet.
ssh in: dpkg: error processing package libxt6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libaudio2:armhf:
ssh in: libaudio2:armhf depends on libxt6; however:
ssh in: Package libxt6:armhf is not configured yet.
ssh in: dpkg: error processing package libaudio2:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libqtgui4:armhf:
ssh in: libqtgui4:armhf depends on libaudio2; however:
ssh in: Package libaudio2:armhf is not configured yet.
ssh in: libqtgui4:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: libqtgui4:armhf depends on libsm6; however:
ssh in: Package libsm6:armhf is not configured yet.
ssh in: dpkg: error processing package libqtgui4:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: Errors were encountered while processing:
ssh in: x11-common
ssh in: libice6:armhf
ssh in: libsm6:armhf
ssh in: libxt6:armhf
ssh in: libaudio2:armhf
ssh in: libqtgui4:armhf
ssh out: E: Sub-process /usr/bin/dpkg returned an error code (1)
ssh in: ---> Downloading the appropriate Hyperion release
ssh out: 2016-09-27 20:10:48 URL:http://netcologne.dl.sourcefor…hyperion_rpi2_osmc.tar.gz [1637006/1637006] -> "-" [1]
ssh in: ---> Installing systemd script
ssh in: ---> Modify systemd script for OSMC usage
ssh in: ---> Starting Hyperion
ssh in: *******************************************************************************
ssh in: Hyperion Installation/Update finished!
ssh in: Please download the latest HyperCon version to benefit from new features!
ssh in: To create a config, follow the HyperCon Guide at our Wiki (EN/DE)!
ssh in: Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org
ssh in: *******************************************************************************
Ich würde mich freuen wenn mir jemand helfen kann. Falls ich Informationen vergessen habe die wichtig sind werde ich diese natürlich noch schreiben.
OSMC Version 2016.08-1 73a160ba830370e09d921c83992882ec
Mit freundlichen Grüßen
Kai
EDIT 29.09.2016 :
Ich konnte das Problem lösen, es lag an der Verkabelung. Ich habe mich bei einem Anschluss um einen PIN vertan..