As the LEDs to not light up, are there any errors in the Log output?
You can access the log via System->Log.
Might be also good, if you put the log in Debug and share the output.
Beiträge von Lord-Grey
-
-
@Frogro If you install hyperion.ng via package there is no need to install all the libraries you are referring to. hyperion.ng brings the required libraries via the package.
What you outline is when one would like to compile hyperion.ng himself. The only exception are platform specific libraries like libcec.
The rest nevertheless is a good outline of installation activities. -
@PaulWebster Thanks for providing more background information. I was not aware that the additional server component is required. Seems you are already set up well.
-
hyperion.ng has FadeCandy support. You might want to try, if this works and then you could avoid an extra component on between....
-
hyperion.ng is what I was referring to here.
If you start hyperion via " "sudo /usr/bin/hyperiond /etc/hyperion/hyperion.config.json"" then it is not hyperion.ng
and you followed the wrong instructions. -
a) To compile a local checked out hyperion.ng repository in a docker container, I tested a while ago.
Here is is modified script https://ufile.io/gtt43pv1
I have not manged to clean it up and merge it with the other compile script, but you might find it helpful.
Place the script in ./bin/scripts and run from the hyperion-home directory:sudo ./bin/scripts/docker-compile_local.sh -t amd64 -b Debug -p false
That will build hyperion.ng in Debug mode for unbuntu-x86 using docker.
Via -t you can also build for other platforms.Do ./bin/scripts/docker-compile_local.sh -h to see the other options.
b)
The binary packages suggested in the primary documentation on the website certainly do not work, as they're still based on the old QT4 build
Would you mind sharing the hyperion.ng documentation sites which still makes references to QT4?
That would get us in the position to have it fixed.... -
@sPOiDar hi, maybe saving you some time and effort...
Please note that the classical Hyperion is discontinued and is not maintained.I suggest you give Hyperion.NG a try either using ready made packages or compile yourself (incl. Qt5).
https://github.com/hyperion-project/hyperion.ng
Plus see input by @Paulchen-Panther above...
-
-
Siehe zweite Zeile der Antwort: "Nein".
Kein Absturz. -
-
Do the following
1. Copy/Paste
2. Save Layout
3. Press Update Preview -
-
Maybe I do not get it...
Are you running:
a) One LED instance (for left, top, right, button) - everything solder through
b) Two (left, top, right) + Bottom -
-
Yes, but there is no ETA defined yet
-
In case you have a LED-device with Rewrite > 0, there is currently a bug that the latest color is displayed,even if the device was turned off.
This has already been fixed:
-
Lightpack currently has a problem.
https://github.com/hyperion-project/hyperion.ng/issues/1015
I have a fix in place, but need to finalize it.
Looks like that you use a multipack configuration. I was currently looking to remove that capability and have it replaced by a multi instance lightpack configuration to allow for better scalability.
How many individual Lightpack devices are you going to run in parallel?
-
das hab ich gerade versucht, da bleiben die Leds leider so stehen, also die Far
Sorry, habe nicht bedacht, dass das in der letzten Alpha Version noch ein Problem war. Habe ich mittlerweile gefixt.
https://github.com/hyperion-project/hyperion.ng/pull/1008Du kannst Dir den letzten Masterbuild installieren, dann sollte es gehen.
Das Problem besteht auch nur, wenn Rewrite > 0 gesetzt ist. Deshalb klappt es bei den WLED, aber nicht beim Stripe.
-
@Danny Ich würde Dir empfehlen den Hintergrundeffekt ("Ausgabe von Schwarz") auszuschalten.
Wenn kein Signal in der Priority Liste mehr anliegt, werden die LEDs richtig ausgeschaltet; so wie wenn du die Fernbedienung benutzt.Warum ein Pseudo-Ausschalten mit Resourcenverbrauch, wenn es auch richtig geht?
-
Do you have installed the latest Hyperion.NG version, I.e. Alpha8?