In copy mode it should be as if you are directly connected to the TV.
regards pclin
In copy mode it should be as if you are directly connected to the TV.
regards pclin
Copy
If you flip the EDID switch reboot the splitter (unplug)
regards pclin
Dann bitte bei Discord melden, Feedback braucht tuxuser.
EDIT: sehe gerade du hast das schon gemeldet.
Ich hatte das nur per Copy & Paste hier rein gesetzt.
Settings kanst du ja auch erst mal per ssh editieren/sichern.
gruß pclin
ps.
So wäre es dann wohl richtig
luna-send -i -f luna://com.webos.appInstallService/dev/install '{"id":"org.webosbrew.piccap","ipkUrl":"/tmp/org.webosbrew.piccap_0.3.0_all.ipk","subscribe":true}
Was da genau nicht stimmt kann ich jetzt nicht sagen, da müsstest du in Discord nachfragen.
Ich vermute aber das "id":"bla" das Problem ist, du hast da ja nur "id":" eingetragen
Mit der Device Manager App funktioniert die Installation.
gruß pclin
User root, Passwort alpine
Du solltest das hier auch lesen.
Mit dem unicapture Branch könntest du mal testen ob das auch mit anderer Auflösung bei dir Funktioniert.
PicCap aus dem Hombrew Channel ist Version 0.2.3, unicapture 0.3.1.
unicapture ist noch in der Entwicklung, soll aber auch bald über den Homebrew Channel kommen.
@tuxuser hat gestern eine Version zum testen bereit gestellt.
Piccap: https://github.com/TBSniller/piccap/actions/runs/2406127114
- Download the ipk zip
- Unzip
- Copy resulting *.ipk to /tmp/ on the TV
- Execute via SSH on the TV:
luna-send -i -f luna://com.webos.appInstallService/dev/install '{"id":"bla","ipkUrl":"/tmp/replace_me.ipk","subscribe":true}
Hyperion.NG zum testen
Hyperion.NG: https://github.com/webosbrew/h…r/actions/runs/2405958099
Bei Discord OpenLGTV findest du immer akuelles.
gruß pclin
ps.
bitte Feedback an tuxuser auf Discord OpenLGTV geben, danke!
DRM protected games will not work.
regards pclin
PicCap and Hyperion.NG (webOS Version) only works on a rooted LG. You can also install Hyperion on the PC.
regards pclin
Do you have a picture in the live preview?
Do effects or colors work?
Did you adjust /boot/config.txt?
Describe what you connected how, take pictures of it.
regards pclin
This is the forum for Hyperion, please ask your questions where the fork came from.
But I suspect that the Foscomax is the problem. Set your devices to 4:2:0. and first only test the splitter, if it works then the Foscomax etc.
DolbyVision will not work with the LED's, they will glow purple.
regards pclin
Bei Hyperion 2.2.
1.5 lässt darauf schließen das ihr den Fork verwendet.
gruß pclin
2.2 ist Default, ich würde dir zu höheren Werten raten.
gruß pclin
The grabber will be one with a macrosilicon chip. Input resolution is probably FullHD. The splitter can probably only do 4K 30 Hz and no HDCP, Settings for EDID are not available, probably no downscaler for the grabber either.
It's best to read here.
regards pclin
Ich hätte das gerne im ersten Post angepasst ist mir aber leider nicht möglich, man kann ja nur eine kurze Zeit den Post bearbeiten.
K.A. ob unser Admin TPmodding das kann, ich hätte nichts dagegen.
Bei den ersten Version von Hyperion.ng konnte es mit Steuerungstyp: wled zu einer Bootschleife auf dem LG kommen, Lord-Grey hat das aber inzwischen behoben, es gibt ja jetzt Verbindungsversuche und Wiederholungsintervall
gruß pclin
Mit der neusten Version von Hyperion.NG kann und sollte man wieder Steuerungstyp: wled verwenden.
DDP wenn man mehr als 490 LED verwendet, das ist die Grenze für udpraw.
Insgesamt habe ich das Gefühl das es aber auch mit weniger LED's mit DDP besser ist.
gruß pclin
Und welche Version von PicCap verwendest du?
Aus dem Homebrew Channel PicCap 0.2.3 oder unicapture Branch PicCap 0.3.0?
gruß pclin
In this case, your grabber will ensure that only FullHD is played back, which is connected to the splitter and then states that I can only do FullHD.
This will be a problem of the EDID data.
It is best to use a splitter that supports EDID Copy from the TV, then you have the best resolution that the TV also supports and Downscaler to Grabber.
RPI3 has HDMI 1.4, 3840 × 2160p @ 24 Hz
regards pclin
Normally there is nothing to configure when PIN 13 is connected between an input and output, if CEC is enabled on your devices.
However, some devices also have setting options, CEC is different depending on the manufacturer and works more or less well.
regards pclin
Dann hat entweder der Grabber oder der USB Port ein Problem.
Instabil war bei mir noch kein Macrosilicon Grabber, mein erster ist nach 1 Tag gestorben, alle anderen danach funktionieren immer noch einwandfrei.
Bei der Mirabox ist es die Mirabox hsv321, hatte ich also richtig in Erinnerung.
gruß pclin
schön das es mit dem LG65G19LA funktioniert!
Es wäre noch super wenn du die Ausgabe von
grep -h -E '"(hardware_id|core_os_release|product_id|webos_manufacturing_version|board_type)"' /var/run/nyx/*
posten könntest.
gruß pclin