Beiträge von Cosmicbase

Ich werde nochmal nach deiner Anleitung neu aufsetzen.
Nach Punkt 4 kommt folgende Ausgabe, warum auch immer.
Muss aber gestehen das ich eine andere Vorgehensweise bei der Installation genommen habe.
Ich habe es nach dem Video von TP Modding gemacht (Raspian).

osmc@osmc:~$ sudo systemctl daemon-reload
osmc@osmc:~$ sudo systemctl enable hyperion.service
Failed to enable unit: File hyperion.service: Bad message
osmc@osmc:~$ systemctl start hyperion.service
Failed to start hyperion.service: Unit hyperion.service is not loaded properly: Bad message.
See system logs and 'systemctl status hyperion.service' for details.
osmc@osmc:~$

OK passt. Jetzt ist sie gelöscht.

OK werde das System neu aufsetzen.
Löschen haut nicht hin.

Habe im /lib/systend/system/

rm hyperion.service

ausgeführt.

Lässt sich nicht löschen.

Ich verstehe es einfach nicht. Habe geschaut. Die hyperion.service ist im Ordner.

Müssen Berechtigungen von hyperion.service geändert werden?

2.

Linux osmc 4.14.78-4-osmc #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sat Nov 2 15:57:49 2019 from 192.168.2.30
osmc@osmc:~$ sudo apt-get update
Hit:1 http://security.debian.org stretch/updates InRelease
Ign:2 http://ftp.debian.org/debian stretch InRelease
Hit:3 http://ftp.debian.org/debian stretch-updates InRelease
Hit:4 http://ftp.debian.org/debian stretch Release
Hit:6 http://ftp.fau.de/osmc/osmc/apt stretch InRelease
Reading package lists... Done
osmc@osmc:~$ sudo apt-get install git cmake build-essential qtbase5-dev libqt5serialport5-dev libusb-1.0-0-dev python3-dev libxrender-dev libavahi-core-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
libavahi-core-dev is already the newest version (0.6.32-2).
build-essential is already the newest version (12.3).
cmake is already the newest version (3.7.2-1).
git is already the newest version (1:2.11.0-3+deb9u4).
libusb-1.0-0-dev is already the newest version (2:1.0.21-1).
libxrender-dev is already the newest version (1:0.9.10-1).
python3-dev is already the newest version (3.5.3-1).
qtbase5-dev is already the newest version (5.7.1+dfsg-3+deb9u1).
libqt5serialport5-dev is already the newest version (5.7.1~20161021-2).
0 upgraded, 0 newly installed, 0 to remove and 35 not upgraded.
osmc@osmc:~$

3.

Linux osmc 4.14.78-4-osmc #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sat Nov 2 15:57:49 2019 from 192.168.2.30
osmc@osmc:~$ sudo apt-get update
Hit:1 http://security.debian.org stretch/updates InRelease
Ign:2 http://ftp.debian.org/debian stretch InRelease
Hit:3 http://ftp.debian.org/debian stretch-updates InRelease
Hit:4 http://ftp.debian.org/debian stretch Release
Hit:6 http://ftp.fau.de/osmc/osmc/apt stretch InRelease
Reading package lists... Done
osmc@osmc:~$ sudo apt-get install git cmake build-essential qtbase5-dev libqt5serialport5-dev libusb-1.0-0-dev python3-dev libxrender-dev libavahi-core-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
libavahi-core-dev is already the newest version (0.6.32-2).
build-essential is already the newest version (12.3).
cmake is already the newest version (3.7.2-1).
git is already the newest version (1:2.11.0-3+deb9u4).
libusb-1.0-0-dev is already the newest version (2:1.0.21-1).
libxrender-dev is already the newest version (1:0.9.10-1).
python3-dev is already the newest version (3.5.3-1).
qtbase5-dev is already the newest version (5.7.1+dfsg-3+deb9u1).
libqt5serialport5-dev is already the newest version (5.7.1~20161021-2).
0 upgraded, 0 newly installed, 0 to remove and 35 not upgraded.
osmc@osmc:~$ wget -qO- https://raw.githubusercontent.….ng/master/bin/compile.sh | sh -s hyperion Release install
Hit:1 http://security.debian.org stretch/updates InRelease
Ign:2 http://ftp.debian.org/debian stretch InRelease
Hit:3 http://ftp.debian.org/debian stretch-updates InRelease
Hit:4 http://ftp.debian.org/debian stretch Release
Hit:6 http://ftp.fau.de/osmc/osmc/apt stretch InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
libavahi-compat-libdnssd-dev is already the newest version (0.6.32-2).
libavahi-core-dev is already the newest version (0.6.32-2).
build-essential is already the newest version (12.3).
cmake is already the newest version (3.7.2-1).
git is already the newest version (1:2.11.0-3+deb9u4).
libusb-1.0-0-dev is already the newest version (2:1.0.21-1).
libxrender-dev is already the newest version (1:0.9.10-1).
python3-dev is already the newest version (3.5.3-1).
qtbase5-dev is already the newest version (5.7.1+dfsg-3+deb9u1).
libqt5serialport5-dev is already the newest version (5.7.1~20161021-2).
0 upgraded, 0 newly installed, 0 to remove and 35 not upgraded.
fatal: destination path 'hyperion' already exists and is not an empty directory.
osmc@osmc:~$

1. Punkt

GNU nano 2.7.4 File: /boot/config.txt
gpu_mem_1024=256
hdmi_ignore_cec_init=1
disable_overscan=1
start_x=1
disable_splash=1
gpu_mem_256=112
sdtv_aspect=3
gpu_mem_512=144
hdmi_force_hotplug=1
dtoverlay=lirc-rpi
dtparam=gpio_in_pin=18
sdtv_mode=2
dtoverlay=spi-bcm2835-overlay
dtparam=gpio_out_pin=17
dtparam=spi=on

[ Read 15 lines ]
^G Get Help ^O Write Out ^W Where Is ^K Cut Text ^J Justify
^X Exit ^R Read File ^\ Replace ^U Uncut Text ^T To Spell

Ja, ich poste mal Punkt für Punkt die Ausgabe.

Vielen Dank für deine ausführliche Beschreibung.

Im letzten Part habe ich folgende Ausgabe...
Warum?

GNU nano 2.7.4 File: /boot/config.txt
gpu_mem_1024=256
hdmi_ignore_cec_init=1
disable_overscan=1
start_x=1
disable_splash=1
gpu_mem_256=112
sdtv_aspect=3
gpu_mem_512=144
hdmi_force_hotplug=1
dtoverlay=lirc-rpi
dtparam=gpio_in_pin=18
sdtv_mode=2
dtoverlay=spi-bcm2835-overlay
dtparam=gpio_out_pin=17
dtparam=spi=on

GNU nano 2.7.4 File: /lib/systemd/system/hyperion.service Modified
[Unit] Description=Hyperion ambient light systemd service
After=network.target [Service] ExecStart=/usr/local/bin/hyperiond
WorkingDirectory=/usr/local/share/hyperion/bin User=osmc
TimeoutStopSec=5 KillMode=mixed Restart=on-failure RestartSec=2
[Install]
WantedBy=multi-user.target

nit] Description=Hyperion ambient light systemd service

GNU nano 2.7.4 File: /lib/systemd/system/hyperion.service
[Unit] Description=Hyperion ambient light systemd service
After=network.target [Service] ExecStart=/usr/local/bin/hyperiond WorkingDirectory=/usr/local/share/hyperion/bin User=osmc nit] Description=Hyperion ambient light systemd serviceartSec=2 [Install]
WantedBy=multi-user.target
After=network.target [Service] ExecStart=/usr/local/bin/hyperiond
WorkingDirectory=/usr/local/share/hyperion/bin User=osmc
TimeoutStopSec=5 KillMode=mixed Restart=on-failure RestartSec=2
[Install]
WantedBy=multi-user.target

osmc@osmc:~$ sudo systemctl daemon-reload
osmc@osmc:~$ sudo systemctl enable hyperion.service
Failed to enable unit: File hyperion.service: Bad message
osmc@osmc:~$ sudo systemctl start hyperion.service
Failed to start hyperion.service: Unit hyperion.service is not loaded properly: Bad message.
See system logs and 'systemctl status hyperion.service' for details.
osmc@osmc:~$

Nimm es auch mal zum Vorteil für andere. Die können aus der Sache auch was lernen.

OK danke und bis morgen.
Melde dich bitte. Vielen lieben Dank für deine Hilfe.
;):)

Linux osmc 4.14.78-4-osmc #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Nov 1 22:44:49 2019 from 192.168.2.30
osmc@osmc:~$ wget -O hyperion.service https://raw.githubusercontent.…/service/hyperion.systemd
--2019-11-01 23:01:16-- https://raw.githubusercontent.…/service/hyperion.systemd
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.112.133
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.112.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 283 [text/plain]
Saving to: 'hyperion.service'

hyperion.service 100%[================>] 283 --.-KB/s in 0s

2019-11-01 23:01:17 (2.38 MB/s) - 'hyperion.service' saved [283/283]

osmc@osmc:~$

Linux osmc 4.14.78-4-osmc #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Nov 1 22:35:29 2019 from 192.168.2.30
osmc@osmc:~$ cat hyperion.service
cat: hyperion.service: No such file or directory
osmc@osmc:~$ cd /etc/systemd/system/
osmc@osmc:/etc/systemd/system$ cat hyperion.service
[Unit] Description=Hyperion ambient light systemd service for user %i
After=network.target [Service] ExecStart=/usr/bin/hyperiond
WorkingDirectory=/usr/share/hyperion/bin User=%i TimeoutStopSec=5
KillMode=mixed Restart=on-failure RestartSec=2 [Install]
WantedBy=multi-user.target
osmc@osmc:/etc/systemd/system$ cd ..
osmc@osmc:/etc/systemd$ sudo systemctl enable hyperion.service
Failed to enable unit: File hyperion.service: Bad message
osmc@osmc:/etc/systemd$

Linux osmc 4.14.78-4-osmc #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Nov 1 22:35:29 2019 from 192.168.2.30
osmc@osmc:~$ cat hyperion.service
cat: hyperion.service: No such file or directory
osmc@osmc:~$ cd /etc/systemd/system/
osmc@osmc:/etc/systemd/system$ cat hyperion.service
[Unit] Description=Hyperion ambient light systemd service for user %i
After=network.target [Service] ExecStart=/usr/bin/hyperiond
WorkingDirectory=/usr/share/hyperion/bin User=%i TimeoutStopSec=5
KillMode=mixed Restart=on-failure RestartSec=2 [Install]
WantedBy=multi-user.target
osmc@osmc:/etc/systemd/system$

sudo nano hyperion.service

Linux osmc 4.14.78-4-osmc #1 SMP PREEMPT Wed Dec 12 17:58:11 UTC 2018 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Nov 1 22:15:17 2019 from 192.168.2.30
osmc@osmc:~$ sudo systemctl enable hyperion.service
Failed to enable unit: File hyperion.service: Bad message
osmc@osmc:~$

Sollte so passen?

cd /etc/systemd/system/
sudo nano hyperion.service
Dann folgendes einfügen.

[Unit] Description=Hyperion ambient light systemd service for user %i After=network.target [Service] ExecStart=/usr/bin/hyperiond WorkingDirectory=/usr/share/hyperion/bin User=%i TimeoutStopSec=5 KillMode=mixed Restart=on-failure RestartSec=2 [Install] WantedBy=multi-user.target

und speichern.

sudo chmod +x hyperion.service

Wenn ich nicht so viel Probleme mit den Befehlszeilen hätte. Sorry hat nix mit faul zu tun.
Sitze jetzt schon den ganzen Nachmittag da.

Ja ich habe jetzt gelesen. Aber wie komme ich in das gewünschte Verzeichnis. Das ist ja schreibgeschützt. Die genau Vorgehensweise ist da nicht beschrieben.
Sudo aber was noch