Alles anzeigenHello, I have a Rpi3 (Raspbian Stretch and Kodi 18.2 with Hyperion) and it syncs perfectly. Now I have a yeelight color version 2. I have activate LAN-Control and I can do ping to my bulb.
When I run yee.py with my bulb off, yee.py put my bulb on (white).
My yee.py is:
#!/usr/bin/python
import socket
import time
import math
from yeelight import *
ip_address = "10.42.0.233"
timeout = 200
def rgb2hsv(r, g, b):
r, g, b = r/255.0, g/255.0, b/255.0
mx = max(r, g, b)
mn = min(r, g, b)
df = mx-mn
if mx == mn:
h = 0
elif mx == r:
h = (60 * ((g-b)/df) + 360) % 360
elif mx == g:
h = (60 * ((b-r)/df) + 120) % 360
elif mx == b:
h = (60 * ((r-g)/df) + 240) % 360
if mx == 0:
s = 0
else:
s = df/mx
v = mx
return round(h), round(s * 100, 1), round(v * 100, 1)
#UDP SERVER
port = 20450
last = ""
s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
s.bind(("", port))
print("waiting on port:", port)
#YEELIGHT
bulb = Bulb(ip_address, effect="smooth", duration=timeout)
bulb.turn_on()
status = "on";
# bulb.effect = "smooth"
#Stop/Start music mode, bypasses lamp rate limits, ensures that previous sockets close before starting
while True:
try:
bulb.stop_music()
break
except BulbException:
break
time.sleep(1)
while True:
try:
bulb.start_music()
break
except BulbException:
break
time.sleep(1)
try:
while True:
d = s.recvfrom(3)
new = bytearray(d[0])
hsv = rgb2hsv(new[0], new[1], new[2])
if new != last:
if hsv[2] == 0.0:
if status == "on":
bulb.turn_off()
status = "off"
elif status == "off":
bulb = Bulb(ip_address, effect="smooth", duration=timeout)
while True:
try:
bulb.start_music()
break
except BulbException:
break
bulb.turn_on()
status = "on"
if status == "on":
bulb.set_hsv(*hsv)
last = new
except KeyboardInterrupt:
print("Exit ...")
My yeelight.config.json is:
{
"device" :
{
"name" : "MyPiudp",
"type" : "udp",
"output" : "127.0.0.1:20450", "protocol" : 0,
"rate" : 1000000,
"colorOrder" : "rgb"
},
// COLOR CALIBRATION CONFIG
"color" :
{
"transform" :
[
{
"id" : "default",
"leds" : "*",
"hsl" :
{
"saturationGain" : 1.0000,
"luminanceGain" : 1.0000,
"luminanceMinimum" : 0.0000
},
"red" :
{
"threshold" : 0.0000,
"gamma" : 2.3000
},
"green" :
{
"threshold" : 0.0000,
"gamma" : 2.3000
},
"blue" :
{
"threshold" : 0.0000,
"gamma" : 2.4000
}
}
],
// SMOOTHING CONFIG
"smoothing" :
{
"type" : "linear",
"time_ms" : 200,
"updateFrequency" : 20.0000,
// "updateDelay" : 0
}
},
// JSON SERVER CONFIG
"jsonServer" :
{
"port" : 19450
},
// PROTO SERVER CONFIG
"protoServer" :
{
"port" : 19451
},
"leds" :
[
{
"index" : 0,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.1000 },
"vscan" : { "minimum" : 0.0000, "maximum" : 1.0000 }
}
],
"blackborderdetector" :
{
"enable" : true,
"threshold" : 0.1
},
"endOfJson" : "endOfJson"
}
And in hyperion.config.json I added:
"forwarder" :
{
"json" : [ "127.0.0.1:19450" ],
"proto" : [ "127.0.0.1:19451" ]
},
"endOfJson" : "endOfJson"
What am I doing wrong? Because when I run python yee.py only put the yeelight on (white) if previously is off, but if I see a film only sync the leds strip I have on tv.
Hello everyone,
i have the same problem, did you find a solution?
My Yeelight Bulbs also turn white and then nothing changes anymore.
When I start the yee.py: it is just waiting for the port. But nothing changes.
Ip's seem to be correct, because they are turning white.
But no syncronization.
pi@raspberrypi:~ $ python yee2.py
('waiting on port:', 20451)
Thanks in advance for any help!
Best Paff