Beiträge von jjuk

I have -ng Alpha6 running on a RPI zero. It's working fine, but i wanted to see if there was any speed improvments on a RPI3.

So i installed this:

wget https://github.com/hyperion-project/hyperion.ng/releases/download/2.0.0-alpha.6/Hyperion-2.0.0-alpha.6-Linux-armv7l.deb


sudo dpkg -i Hyperion-2.0.0-alpha.6-Linux-armv7l.deb
sudo systemctl disable --now hyperiond@pi
sudo systemctl enable --now hyperiond@root

I ran through the setup in the GUI, then saved.
Then i lost access via the gui, and i get this:

hyperiond
[hyperiond LEDDEVICE] <ERROR> Device disabled, device 'ws281x' signals error: 'Unable to initialize ws281x library.'

I'm still working on this.

I'm trying to send TCP packets to port 19444 (the port defined in Network settings for JSON Server).

I can send led device on/off commands to the default instance (instance 0), but cannot control instance 1.

Select instance 0 in the webgui, then go to dashboard and watch "LED Device"

Send:
{"command": "componentstate","componentstate": {"component": "LEDDEVICE", "state": true}}\n

{"command": "componentstate","componentstate": {"component": "LEDDEVICE", "state": false}}\n

The LED device turns on then off.

Now select instance 1 in the GUI and send:

{"command": "instance","subcommand": "switchTo","instance": 1}\n

{"command": "componentstate","componentstate": {"component": "LEDDEVICE", "state": true}}\n

{"command": "componentstate","componentstate": {"component": "LEDDEVICE", "state": false}}\n

The instance doesn't turn on/off.

This process works for POST to http://192.168.1.95:8090/json-rpc, but doesn't seem to work for TCP.

I'm using "packet Sender" to send TCP: https://packetsender.com/#Download

I've created a token and enabled "Local API Authentication", but i am able to control Hyperion via json without passing the token.

The need for authentication seems to be ignored?

Ok, thanks!

Ok, i sent this:

{
  "command" : "instance",
  "subcommand" : "switchTo",
  "instance" : 1
}

and now it is responding to my commands. The docs state that the "It's possible that an instance will stop while you are connected". What does this mean? Why would an instance stop?

I have "First LED Hardware Instance" and "TV Test 1".

I have "Selected instance: TV Test 1" in the GUI.

I'm new to hyperion, so i'm not 100% if that's what you mean by "hyperion instance".

Sorry for being noob We all start somewhere, some time!

Insomnia Core: https://insomnia.rest/download/

I started playing with the Json server yesterday with a view to use it to remote control Hyperion.
https://docs.hyperion-project.org/en/json/
Is the Json Server complete and working? I'm getting unexpected results:

{
    "command": "color",
    "color": [
        0,
        255,
        255
    ],
    "duration": 12000,
    "priority": 20,
    "origin": "My Fancy App"
}


returns:


{
  "command": "color",
  "success": true,
  "tan": 0
}


but no color is set. Nothing appears to happen.

{
    "command" : "authorize",
    "subcommand" : "tokenRequired"
}


returns:


{
  "command": "",
  "error": "Command not implemented",
  "success": false,
  "tan": 0
}

{
    "command": "componentstate",
    "componentstate": {
        "component": "LEDDEVICE",
        "state": false
    }
}


returns:


{
  "command": "componentstate",
  "success": true,
  "tan": 0
}


But the LEDs do not turn off.
They can be turned off from the "Remote Control" section
of the web gui successfully.