Ja danke für den tipp daran hatte ich garnicht gedacht
Beiträge von selimbaba67
-
-
yinede yardimin icin cok saol
neues pi ist schon unterwegs ich werd das hier für andere dinge nutzen die in meinem kopf so rumschwirren -
-
aslm,
sure i will report if its done---EDIT---
seems like the gpios are all gone. thats sad i dont now why yet, but i will figure it out. So the good thing is the pi is working without any issues, i should be able to use it for something else which dont requires gpio pins
Code
Alles anzeigenThe main 8 GPIO pins 0: 7: --> Pin 0 failure. Expected 1, got 0 --> Pin 1 failure. Expected 1, got 0 --> Pin 2 failure. Expected 1, got 0 --> Pin 3 failure. Expected 1, got 0 --> Pin 4 failure. Expected 1, got 0 --> Pin 5 failure. Expected 1, got 0 --> Pin 6 failure. Expected 1, got 0 --> Pin 7 failure. Expected 1, got 0 8 faults detected The 5 SPI pins 10:14: --> Pin 10 failure. Expected 1, got 0 --> Pin 11 failure. Expected 1, got 0 --> Pin 12 failure. Expected 1, got 0 --> Pin 13 failure. Expected 1, got 0 --> Pin 14 failure. Expected 1, got 0 5 faults detected The serial pins 15:16: --> Pin 15 failure. Expected 1, got 0 --> Pin 16 failure. Expected 1, got 0 2 faults detected The I2C pins 8: 9: Pin 8 failure - expected 1, got 0 Pin 9 failure - expected 1, got 0 2 faults detected Faults detected! Output of 'readall': +-----+-----+---------+------+---+---Pi 2---+---+------+---------+-----+-----+ | BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM | +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+ | | | 3.3v | | | 1 || 2 | | | 5v | | | | 2 | 8 | SDA.1 | IN | 0 | 3 || 4 | | | 5v | | | | 3 | 9 | SCL.1 | IN | 0 | 5 || 6 | | | 0v | | | | 4 | 7 | GPIO. 7 | IN | 0 | 7 || 8 | 0 | IN | TxD | 15 | 14 | | | | 0v | | | 9 || 10 | 0 | IN | RxD | 16 | 15 | | 17 | 0 | GPIO. 0 | IN | 0 | 11 || 12 | 0 | IN | GPIO. 1 | 1 | 18 | | 27 | 2 | GPIO. 2 | IN | 0 | 13 || 14 | | | 0v | | | | 22 | 3 | GPIO. 3 | IN | 0 | 15 || 16 | 0 | IN | GPIO. 4 | 4 | 23 | | | | 3.3v | | | 17 || 18 | 0 | IN | GPIO. 5 | 5 | 24 | | 10 | 12 | MOSI | IN | 0 | 19 || 20 | | | 0v | | | | 9 | 13 | MISO | IN | 0 | 21 || 22 | 0 | IN | GPIO. 6 | 6 | 25 | | 11 | 14 | SCLK | IN | 0 | 23 || 24 | 0 | IN | CE0 | 10 | 8 | | | | 0v | | | 25 || 26 | 0 | IN | CE1 | 11 | 7 | | 0 | 30 | SDA.0 | IN | 0 | 27 || 28 | 0 | IN | SCL.0 | 31 | 1 | | 5 | 21 | GPIO.21 | IN | 0 | 29 || 30 | | | 0v | | | | 6 | 22 | GPIO.22 | IN | 0 | 31 || 32 | 0 | IN | GPIO.26 | 26 | 12 | | 13 | 23 | GPIO.23 | IN | 0 | 33 || 34 | | | 0v | | | | 19 | 24 | GPIO.24 | IN | 0 | 35 || 36 | 0 | IN | GPIO.27 | 27 | 16 | | 26 | 25 | GPIO.25 | IN | 0 | 37 || 38 | 0 | IN | GPIO.28 | 28 | 20 | | | | 0v | | | 39 || 40 | 0 | IN | GPIO.29 | 29 | 21 | +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+ | BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM | +-----+-----+---------+------+---+---Pi 2---+---+------+---------+-----+-----+ pi@raspberrypi:~/test/wiringPi/gpio $
-
Hello guys i have a strange Problem and need your help.
I had a Setup with an Raspi 2 and OSMC Hyperion wich worked flawlessly until i updated OSMC.
So now a couple of reinstallations ill giving up and asking you guys for help.First. I checked the connections and its working. When i am hooking up a raspberry pi 1 with an clean install its working.
But it doesnt wann work with the Raspberry pi 2.So first the logfile
Code
Alles anzeigenssh in: Jan 15 12:08:31 osmc systemd[1]: Starting Hyperion Systemd service... ssh in: Jan 15 12:08:31 osmc systemd[1]: Started Hyperion Systemd service. ssh in: Jan 15 12:08:32 osmc hyperiond[263]: Hyperion Ambilight Deamon (263) ssh in: Jan 15 12:08:32 osmc hyperiond[263]: Version : V1.03.2 (brindosch-99d9396/d3713a8-1469452981 ssh in: Jan 15 12:08:32 osmc hyperiond[263]: Build Time: Jul 25 2016 06:54:40 ssh in: Jan 15 12:08:33 osmc hyperiond[263]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json ssh in: Jan 15 12:08:33 osmc hyperiond[263]: HYPERION INFO: ColorTransform 'default' => [0; 45] ssh in: Jan 15 12:08:33 osmc hyperiond[263]: HYPERION INFO: ColorCorrection 'default' => [0; 45] ssh in: Jan 15 12:08:33 osmc hyperiond[263]: HYPERION INFO: ColorAdjustment 'default' => [0; 45] ssh in: Jan 15 12:08:33 osmc hyperiond[263]: LEDDEVICE INFO: configuration: ssh in: Jan 15 12:08:33 osmc hyperiond[263]: { ssh in: Jan 15 12:08:33 osmc hyperiond[263]: "colorOrder" : "rgb", ssh in: Jan 15 12:08:33 osmc hyperiond[263]: "name" : "MyHyperionConfig", ssh in: Jan 15 12:08:33 osmc hyperiond[263]: "output" : "/dev/spidev0.1", ssh in: Jan 15 12:08:33 osmc hyperiond[263]: "rate" : 1000000, ssh in: Jan 15 12:08:33 osmc hyperiond[263]: "type" : "ws2801" ssh in: Jan 15 12:08:33 osmc hyperiond[263]: } ssh in: Jan 15 12:08:33 osmc hyperiond[263]: INFO: Creating linear smoothing ssh in: Jan 15 12:08:33 osmc hyperiond[263]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=40;settlingTime_ms=100;updateDelay=0 ssh in: Jan 15 12:08:33 osmc hyperiond[263]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects ssh in: Jan 15 12:08:33 osmc hyperiond[263]: EFFECTENGINE INFO: Initializing Python interpreter ssh in: Jan 15 12:08:34 osmc hyperiond[263]: INFO: Hyperion started and initialised ssh in: Jan 15 12:08:34 osmc hyperiond[263]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0 ssh in: Jan 15 12:08:34 osmc hyperiond[263]: BLACKBORDER INFO: threshold set to 0 (0) ssh in: Jan 15 12:08:34 osmc hyperiond[263]: BLACKBORDER INFO: mode:default ssh in: Jan 15 12:08:34 osmc hyperiond[263]: started ssh in: Jan 15 12:08:34 osmc hyperiond[263]: INFO: Kodi checker created and started ssh in: Jan 15 12:08:34 osmc hyperiond[263]: INFO: Json server created and started on port 19444 ssh in: Jan 15 12:08:34 osmc hyperiond[263]: INFO: Proto server created and started on port 19445 ssh in: Jan 15 12:08:34 osmc hyperiond[263]: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080 ssh in: Jan 15 12:08:34 osmc hyperiond[263]: BLACKBORDER INFO: threshold set to 0 (0) ssh in: Jan 15 12:08:34 osmc hyperiond[263]: BLACKBORDER INFO: mode:default ssh in: Jan 15 12:08:34 osmc hyperiond[263]: INFO: Frame grabber created and started ssh in: Jan 15 12:08:34 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:08:34 osmc hyperiond[263]: BORDER SWITCH REQUIRED!! ssh in: Jan 15 12:08:34 osmc hyperiond[263]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0 ssh in: Jan 15 12:08:37 osmc hyperiond[263]: EFFECTENGINE INFO: effect finished ssh in: Jan 15 12:08:53 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:09:03 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:09:13 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:09:23 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:09:33 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:09:43 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:09:53 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:10:03 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:10:13 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:10:23 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:10:33 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:10:43 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:10:53 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:11:03 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:11:13 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:11:23 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:11:33 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:11:43 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:11:53 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:12:03 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:12:13 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:12:23 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:12:33 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:12:43 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:12:53 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:13:03 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:13:13 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0) ssh in: Jan 15 12:13:20 osmc hyperiond[263]: JSONSERVER INFO: New connection ssh in: Jan 15 12:13:20 osmc hyperiond[263]: BLACKBORDER INFO: threshold set to 0 (0) ssh in: Jan 15 12:13:20 osmc hyperiond[263]: BLACKBORDER INFO: mode:default ssh in: Jan 15 12:13:20 osmc hyperiond[263]: JSONSERVER INFO: Connection closed ssh in: Jan 15 12:13:21 osmc hyperiond[263]: JSONSERVER INFO: New connection ssh in: Jan 15 12:13:21 osmc hyperiond[263]: BLACKBORDER INFO: threshold set to 0 (0) ssh in: Jan 15 12:13:21 osmc hyperiond[263]: BLACKBORDER INFO: mode:default ssh in: Jan 15 12:13:21 osmc hyperiond[263]: JSONSERVER INFO: Connection closed ssh in: Jan 15 12:13:22 osmc hyperiond[263]: JSONSERVER INFO: New connection ssh in: Jan 15 12:13:22 osmc hyperiond[263]: BLACKBORDER INFO: threshold set to 0 (0) ssh in: Jan 15 12:13:22 osmc hyperiond[263]: BLACKBORDER INFO: mode:default ssh in: Jan 15 12:13:22 osmc hyperiond[263]: JSONSERVER INFO: Connection closed ssh in: Jan 15 12:13:22 osmc hyperiond[263]: JSONSERVER INFO: New connection ssh in: Jan 15 12:13:22 osmc hyperiond[263]: BLACKBORDER INFO: threshold set to 0 (0) ssh in: Jan 15 12:13:22 osmc hyperiond[263]: BLACKBORDER INFO: mode:default ssh in: Jan 15 12:13:22 osmc hyperiond[263]: JSONSERVER INFO: Connection closed ssh in: Jan 15 12:13:23 osmc hyperiond[263]: JSONSERVER INFO: New connection ssh in: Jan 15 12:13:23 osmc hyperiond[263]: BLACKBORDER INFO: threshold set to 0 (0) ssh in: Jan 15 12:13:23 osmc hyperiond[263]: BLACKBORDER INFO: mode:default ssh in: Jan 15 12:13:23 osmc hyperiond[263]: JSONSERVER INFO: Connection closed ssh in: Jan 15 12:13:23 osmc hyperiond[263]: KODICHECK ERROR: Kodi Connection error (0)
The configfile.
In my Oldconfig it worked with spidev0.0
in this one i tryed spidev0.1 also but still not working.Code
Alles anzeigen// Automatically generated configuration file for 'Hyperion daemon' // Generated by: HyperCon (The Hyperion deamon configuration file builder { /// Device configuration contains the following fields: /// * 'name' : The user friendly name of the device (only used for display purposes) /// * 'type' : The type of the device or leds (known types for now are 'ws2801', 'ldp8806', /// 'lpd6803', 'sedu', 'adalight', 'lightpack', 'test' and 'none') /// * 'output' : The output specification depends on selected device. This can for example be the /// device specifier, device serial number, or the output file name /// * 'rate' : The baudrate of the output to the device /// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.). "device" : { "name" : "MyPi", "type" : "ws2801", "output" : "/dev/spidev0.1", "rate" : 250000, "colorOrder" : "rgb" }, /// Color manipulation configuration used to tune the output colors to specific surroundings. /// The configuration contains a list of color-transforms. Each transform contains the /// following fields: /// * 'id' : The unique identifier of the color transformation (eg 'device_1') /// * 'leds' : The indices (or index ranges) of the leds to which this color transform applies /// (eg '0-5, 9, 11, 12-17'). The indices are zero based. /// * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following /// tuning parameters: /// - 'saturationGain' The gain adjustement of the saturation /// - 'valueGain' The gain adjustement of the value /// * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the /// following tuning parameters for each channel: /// - 'threshold' The minimum required input value for the channel to be on /// (else zero) /// - 'gamma' The gamma-curve correction factor /// - 'blacklevel' The lowest possible value (when the channel is black) /// - 'whitelevel' The highest possible value (when the channel is white) /// /// Next to the list with color transforms there is also a smoothing option. /// * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning /// parameters: /// - 'type' The type of smoothing algorithm ('linear' or 'none') /// - 'time_ms' The time constant for smoothing algorithm in milliseconds /// - 'updateFrequency' The update frequency of the leds in Hz "color" : { "transform" : [ { "id" : "default", "leds" : "*", "hsv" : { "saturationGain" : 3.0000, "valueGain" : 3.5000 }, "red" : { "threshold" : 0.0000, "gamma" : 1.0000, "blacklevel" : 0.0000, "whitelevel" : 0.7100 }, "green" : { "threshold" : 0.0000, "gamma" : 1.0000, "blacklevel" : 0.0000, "whitelevel" : 1.0000 }, "blue" : { "threshold" : 0.0000, "gamma" : 1.0000, "blacklevel" : 0.0000, "whitelevel" : 0.5100 } } ], "smoothing" : { "type" : "linear", "time_ms" : 100, "updateFrequency" : 25.0000 } }, /// The configuration for each individual led. This contains the specification of the area /// averaged of an input image for each led to determine its color. Each item in the list /// contains the following fields: /// * index: The index of the led. This determines its location in the string of leds; zero /// being the first led. /// * hscan: The fractional part of the image along the horizontal used for the averaging /// (minimum and maximum inclusive) /// * vscan: The fractional part of the image along the vertical used for the averaging /// (minimum and maximum inclusive) "leds" : [ { "index" : 0, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 1, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.9000, "maximum" : 1.0000 } }, { "index" : 2, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.8000, "maximum" : 0.9000 } }, { "index" : 3, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.7000, "maximum" : 0.8000 } }, { "index" : 4, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.6000, "maximum" : 0.7000 } }, { "index" : 5, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.5000, "maximum" : 0.6000 } }, { "index" : 6, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.4000, "maximum" : 0.5000 } }, { "index" : 7, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.3000, "maximum" : 0.4000 } }, { "index" : 8, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.2000, "maximum" : 0.3000 } }, { "index" : 9, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.1000, "maximum" : 0.2000 } }, { "index" : 10, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 11, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0556 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 12, "hscan" : { "minimum" : 0.0556, "maximum" : 0.1111 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 13, "hscan" : { "minimum" : 0.1111, "maximum" : 0.1667 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 14, "hscan" : { "minimum" : 0.1667, "maximum" : 0.2222 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 15, "hscan" : { "minimum" : 0.2222, "maximum" : 0.2778 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 16, "hscan" : { "minimum" : 0.2778, "maximum" : 0.3333 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 17, "hscan" : { "minimum" : 0.3333, "maximum" : 0.3889 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 18, "hscan" : { "minimum" : 0.3889, "maximum" : 0.4444 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 19, "hscan" : { "minimum" : 0.4444, "maximum" : 0.5000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 20, "hscan" : { "minimum" : 0.5000, "maximum" : 0.5556 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 21, "hscan" : { "minimum" : 0.5556, "maximum" : 0.6111 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 22, "hscan" : { "minimum" : 0.6111, "maximum" : 0.6667 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 23, "hscan" : { "minimum" : 0.6667, "maximum" : 0.7222 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 24, "hscan" : { "minimum" : 0.7222, "maximum" : 0.7778 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 25, "hscan" : { "minimum" : 0.7778, "maximum" : 0.8333 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 26, "hscan" : { "minimum" : 0.8333, "maximum" : 0.8889 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 27, "hscan" : { "minimum" : 0.8889, "maximum" : 0.9444 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 28, "hscan" : { "minimum" : 0.9444, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 } }, { "index" : 29, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.0000, "maximum" : 0.1000 } }, { "index" : 30, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.1000, "maximum" : 0.2000 } }, { "index" : 31, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.2000, "maximum" : 0.3000 } }, { "index" : 32, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.3000, "maximum" : 0.4000 } }, { "index" : 33, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.4000, "maximum" : 0.5000 } }, { "index" : 34, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.5000, "maximum" : 0.6000 } }, { "index" : 35, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.6000, "maximum" : 0.7000 } }, { "index" : 36, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.7000, "maximum" : 0.8000 } }, { "index" : 37, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.8000, "maximum" : 0.9000 } }, { "index" : 38, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.9000, "maximum" : 1.0000 } }, { "index" : 39, "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 40, "hscan" : { "minimum" : 0.9444, "maximum" : 1.0000 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 41, "hscan" : { "minimum" : 0.8889, "maximum" : 0.9444 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 42, "hscan" : { "minimum" : 0.8333, "maximum" : 0.8889 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 43, "hscan" : { "minimum" : 0.7778, "maximum" : 0.8333 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 44, "hscan" : { "minimum" : 0.7222, "maximum" : 0.7778 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 45, "hscan" : { "minimum" : 0.6667, "maximum" : 0.7222 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 46, "hscan" : { "minimum" : 0.6111, "maximum" : 0.6667 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 47, "hscan" : { "minimum" : 0.5556, "maximum" : 0.6111 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 48, "hscan" : { "minimum" : 0.5000, "maximum" : 0.5556 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 49, "hscan" : { "minimum" : 0.4444, "maximum" : 0.5000 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 50, "hscan" : { "minimum" : 0.3889, "maximum" : 0.4444 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 51, "hscan" : { "minimum" : 0.3333, "maximum" : 0.3889 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 52, "hscan" : { "minimum" : 0.2778, "maximum" : 0.3333 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 53, "hscan" : { "minimum" : 0.2222, "maximum" : 0.2778 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 54, "hscan" : { "minimum" : 0.1667, "maximum" : 0.2222 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 55, "hscan" : { "minimum" : 0.1111, "maximum" : 0.1667 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 56, "hscan" : { "minimum" : 0.0556, "maximum" : 0.1111 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } }, { "index" : 57, "hscan" : { "minimum" : 0.0000, "maximum" : 0.0556 }, "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 } } ], /// The black border configuration, contains the following items: /// * enable : true if the detector should be activated /// * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0) "blackborderdetector" : { "enable" : true, "threshold" : 0.01 }, /// The configuration of the effect engine, contains the following items: /// * paths : An array with absolute location(s) of directories with effects /// * bootsequence : The effect selected as 'boot sequence' "effects" : { "paths" : [ "/opt/hyperion/effects" ] }, "bootsequence" : { "effect" : "Rainbow swirl fast", "duration_ms" : 3500 }, /// The configuration for the frame-grabber, contains the following items: /// * width : The width of the grabbed frames [pixels] /// * height : The height of the grabbed frames [pixels] /// * frequency_Hz : The frequency of the frame grab [Hz] "framegrabber" : { "width" : 64, "height" : 64, "frequency_Hz" : 10.0 }, /// The configuration of the XBMC connection used to enable and disable the frame-grabber. Contains the following fields: /// * xbmcAddress : The IP address of the XBMC-host /// * xbmcTcpPort : The TCP-port of the XBMC-server /// * grabVideo : Flag indicating that the frame-grabber is on(true) during video playback /// * grabPictures : Flag indicating that the frame-grabber is on(true) during picture show /// * grabAudio : Flag indicating that the frame-grabber is on(true) during audio playback /// * grabMenu : Flag indicating that the frame-grabber is on(true) in the XBMC menu /// * grabScreensaver : Flag indicating that the frame-grabber is on(true) when XBMC is on screensaver /// * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing "xbmcVideoChecker" : { "xbmcAddress" : "127.0.0.1", "xbmcTcpPort" : 9090, "grabVideo" : true, "grabPictures" : true, "grabAudio" : true, "grabMenu" : true, "grabScreensaver" : true, "enable3DDetection" : true }, /// The configuration of the Json server which enables the json remote interface /// * port : Port at which the json server is started "jsonServer" : { "port" : 19444 }, /// The configuration of the Proto server which enables the protobuffer remote interface /// * port : Port at which the protobuffer server is started "protoServer" : { "port" : 19445 }, /// The configuration of the boblight server which enables the boblight remote interface /// * port : Port at which the boblight server is started // "boblightServer" : // { // "port" : 19333 // }, "endOfJson" : "endOfJson" }
So again when i setup a raspberry pi 1 its working with an configfile with spidev0.0.
I dont now why its not working with the pi2 anymore
The config.txt of the pi2Code
Alles anzeigengpu_mem_1024=256 hdmi_ignore_cec_init=1 disable_overscan=1 start_x=1 disable_splash=1 dtparam=spi=on
Oh and i am using WS2801 LEDS again the LEDS are fine the wiring is fine the powersupply has enough juice a hooked it up to an meanwell 5V 10A powersupply.
I dont now how to solve the problem need your help---EDIT---
I run a testpin script from wiringpi and as result i got this. Is that meaning the pins are all dead?Code
Alles anzeigenThe main 8 GPIO pins 0: 7: --> Pin 0 failure. Expected 1, got 0 --> Pin 1 failure. Expected 1, got 0 --> Pin 2 failure. Expected 1, got 0 --> Pin 3 failure. Expected 1, got 0 --> Pin 4 failure. Expected 1, got 0 --> Pin 5 failure. Expected 1, got 0 --> Pin 6 failure. Expected 1, got 0 --> Pin 7 failure. Expected 1, got 0 8 faults detected The 5 SPI pins 10:14: --> Pin 10 failure. Expected 1, got 0 --> Pin 11 failure. Expected 1, got 0 --> Pin 12 failure. Expected 1, got 0 --> Pin 13 failure. Expected 1, got 0 --> Pin 14 failure. Expected 1, got 0 5 faults detected The serial pins 15:16: --> Pin 15 failure. Expected 1, got 0 --> Pin 16 failure. Expected 1, got 0 2 faults detected The I2C pins 8: 9: Pin 8 failure - expected 1, got 0 Pin 9 failure - expected 1, got 0 2 faults detected Faults detected! Output of 'readall': +-----+-----+---------+------+---+---Pi 2---+---+------+---------+-----+-----+ | BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM | +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+ | | | 3.3v | | | 1 || 2 | | | 5v | | | | 2 | 8 | SDA.1 | IN | 0 | 3 || 4 | | | 5v | | | | 3 | 9 | SCL.1 | IN | 0 | 5 || 6 | | | 0v | | | | 4 | 7 | GPIO. 7 | IN | 0 | 7 || 8 | 0 | IN | TxD | 15 | 14 | | | | 0v | | | 9 || 10 | 0 | IN | RxD | 16 | 15 | | 17 | 0 | GPIO. 0 | IN | 0 | 11 || 12 | 0 | IN | GPIO. 1 | 1 | 18 | | 27 | 2 | GPIO. 2 | IN | 0 | 13 || 14 | | | 0v | | | | 22 | 3 | GPIO. 3 | IN | 0 | 15 || 16 | 0 | IN | GPIO. 4 | 4 | 23 | | | | 3.3v | | | 17 || 18 | 0 | IN | GPIO. 5 | 5 | 24 | | 10 | 12 | MOSI | IN | 0 | 19 || 20 | | | 0v | | | | 9 | 13 | MISO | IN | 0 | 21 || 22 | 0 | IN | GPIO. 6 | 6 | 25 | | 11 | 14 | SCLK | IN | 0 | 23 || 24 | 0 | IN | CE0 | 10 | 8 | | | | 0v | | | 25 || 26 | 0 | IN | CE1 | 11 | 7 | | 0 | 30 | SDA.0 | IN | 0 | 27 || 28 | 0 | IN | SCL.0 | 31 | 1 | | 5 | 21 | GPIO.21 | IN | 0 | 29 || 30 | | | 0v | | | | 6 | 22 | GPIO.22 | IN | 0 | 31 || 32 | 0 | IN | GPIO.26 | 26 | 12 | | 13 | 23 | GPIO.23 | IN | 0 | 33 || 34 | | | 0v | | | | 19 | 24 | GPIO.24 | IN | 0 | 35 || 36 | 0 | IN | GPIO.27 | 27 | 16 | | 26 | 25 | GPIO.25 | IN | 0 | 37 || 38 | 0 | IN | GPIO.28 | 28 | 20 | | | | 0v | | | 39 || 40 | 0 | IN | GPIO.29 | 29 | 21 | +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+ | BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM | +-----+-----+---------+------+---+---Pi 2---+---+------+---------+-----+-----+ osmc@osmc:~/test/wiringPi/gpio$