Beiträge von xSunshin3x
-
-
hey guys,
im running hyperion ng alpha 8 on my pi zero w with a total of 198 SK9822 LEDs (60leds/m).
The layout is as follows:
top/bottom: 64 leds
left/right: 35 ledsI noticed that on the left/right side of my TV, the led colors on the bottom/top part fit with the captured screen (usually the first 13-15 leds, but somehow the remaining leds in the middle are off by one, as you can see in the picture, where the screen shows a green color, but the led behind the TV is blue
This happens with the default "LED Layout settings".
I tried fixing this by adjusting a few parameters under the 'Advanced Settings' section, e.g. "Point top left, point top right" etc but this leads to the issue that the upper 5% of the captured screen gets cut off and the leds display a wrong screen color.Any ideas how to fix this?
-
Try upgrading to hyperion alpha 8.
Are you able so somewhat control your APA102 leds, even by choosing another controller type under "LED Hardware Configuration"?
Try testing your leds with https://github.com/tinue/apa102-pi and the runcolorcycle.py script Does the script work?
/edit btw 10A power supply should be more than sufficient