Beiträge von grbatrain

grbatrain · 6. Januar 2022

Zitat von jochenf

Hi,

versuch mal die von mir weiter oben verlinkte Version, damit war der Fehler bei mir weg. Geht zwar trotzdem bei mir nicht, starten und stoppen lässt es sich aber über die Gui mit der Version aber.

Grüße
Micha

Alles anzeigen

Danke für deine Antwort. Aber habe mit einem der Entwickler herausgefunden, dass die Software auf einem xxum71007lb nicht läuft, da nicht bekannt ist, wie der TV Bilder aufnimmt.

Heißt wohl abwarten und hoffen. Chancen sehe ich da aber erstmal weniger in nächster Zeit .

grbatrain · 3. Januar 2022

Thanks for your reply. The Capture Card is running fine again so it should work 1:1 as before. LEDs still wont turn on. No boot effect or manually turning on the LEDs

Spoiler anzeigen

2022-01-03T09:14:06.422Z [hyperiond DAEMON] (INFO) CEC handler created
2022-01-03T09:14:06.445Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
2022-01-03T09:14:06.451Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
2022-01-03T09:14:06.454Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory //.hyperion/custom-effects
2022-01-03T09:14:06.524Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:107:SettingsManager()) Settings database initialized
2022-01-03T09:14:06.529Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
2022-01-03T09:14:06.529Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2022-01-03T09:14:06.576Z [hyperiond DAEMON] (INFO) set screen capture device to 'dispmanx'
2022-01-03T09:14:06.577Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2022-01-03T09:14:06.579Z [hyperiond DISPMANXGRABBER] (INFO) Display opened with resolution: 640x480
2022-01-03T09:14:06.579Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 80, height: 45 for capture
2022-01-03T09:14:06.579Z [hyperiond DAEMON] (INFO) DISPMANX frame grabber created
2022-01-03T09:14:06.580Z [hyperiond V4L2:AUTO] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2022-01-03T09:14:06.670Z [hyperiond V4L2:AUTO] (INFO) Signal threshold set to: {12, 12, 12}
2022-01-03T09:14:06.670Z [hyperiond V4L2:AUTO] (INFO) Signal detection is now disabled
2022-01-03T09:14:06.670Z [hyperiond V4L2:AUTO] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2022-01-03T09:14:06.671Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:568:handleSettingsUpdate()) V4L2 grabber created
2022-01-03T09:14:06.672Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:27:JsonServer()) Created instance
2022-01-03T09:14:06.672Z [hyperiond JSONSERVER] (INFO) Started on port 19444
2022-01-03T09:14:06.580Z [hyperiond CEC] (INFO) Starting CEC handler
2022-01-03T09:14:06.599Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2022-01-03T09:14:06.599Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'ws281x'.
2022-01-03T09:14:06.600Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:147:init()) deviceConfig: [{"colorOrder":"grb","currentLedCount":224,"dma":5,"gpio":18,"hardwareLedCount":224,"invert":false,"latchTime":0,"leds":224,"pwmchannel":0,"rewriteTime":1000,"rgbw":false,"type":"ws281x","whiteAlgorithm":"subtract_minimum"}]
2022-01-03T09:14:06.600Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:403:setLatchTime()) LatchTime updated to 0ms
2022-01-03T09:14:06.601Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:423:setRewriteTime()) Refresh interval = 1000ms
2022-01-03T09:14:06.601Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:429:setRewriteTime()) RewriteTime updated to 1000ms
2022-01-03T09:14:06.601Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWS281x.cpp:59:init()) ws281x strip type : 1050624
2022-01-03T09:14:06.617Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401
2022-01-03T09:14:06.632Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0
2022-01-03T09:14:06.674Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
2022-01-03T09:14:06.675Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
2022-01-03T09:14:06.682Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:32:initServer()) Initialize Webserver
2022-01-03T09:14:06.682Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:32:initServer()) Initialize Webserver
2022-01-03T09:14:06.711Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2022-01-03T09:14:06.712Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2022-01-03T09:14:06.713Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started
2022-01-03T09:14:06.714Z [hyperiond EFFECTENGINE] (INFO) Run effect "Warm mood blobs" on channel 254
2022-01-03T09:14:06.715Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Warm mood blobs], smoothCfg [2]
2022-01-03T09:14:06.716Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/EFFECT' with priority 254 as inactive
2022-01-03T09:14:06.717Z [hyperiond HYPERION] (INFO) Inital background effect 'Warm mood blobs' started
2022-01-03T09:14:06.718Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/V4L' with priority 100 as inactive
2022-01-03T09:14:06.719Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
2022-01-03T09:14:06.723Z [hyperiond V4L2:AUTO] (INFO) available V4L2 devices:
/dev/video0 USB Video: USB Video
/dev/video14 bcm2835-isp-capture0
/dev/video15 bcm2835-isp-capture1

2022-01-03T09:14:06.723Z [hyperiond V4L2:AUTO] (INFO) search for usable video devices
2022-01-03T09:14:06.726Z [hyperiond V4L2:AUTO] (INFO) test v4l device: /dev/video0
2022-01-03T09:14:06.727Z [hyperiond V4L2:AUTO] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=1920 height=1080
2022-01-03T09:14:06.729Z [hyperiond V4L2:AUTO] (DEBUG) (V4L2Grabber.cpp:713:init_device()) Set framerate to 5 fps
2022-01-03T09:14:06.729Z [hyperiond V4L2:AUTO] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV
2022-01-03T09:14:06.753Z [hyperiond V4L2:AUTO] (INFO) found usable v4l2 device: /dev/video0 (USB Video: USB Video)
2022-01-03T09:14:06.755Z [hyperiond V4L2:AUTO] (INFO) Started
2022-01-03T09:14:06.755Z [hyperiond V4L2:auto] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2022-01-03T09:14:06.720Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2022-01-03T09:14:06.757Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started
2022-01-03T09:14:06.721Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2022-01-03T09:14:06.829Z [hyperiond CEC] (INFO) Auto detecting CEC adapter
2022-01-03T09:14:06.830Z [hyperiond CEC] (INFO) CEC Adapter:
2022-01-03T09:14:06.831Z [hyperiond CEC] (INFO) Name : RPI
2022-01-03T09:14:06.831Z [hyperiond CEC] (INFO) Path : Raspberry Pi
2022-01-03T09:14:06.858Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:90:handleSettingsUpdate()) Apply Webserver settings
2022-01-03T09:14:06.858Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:90:handleSettingsUpdate()) Apply Webserver settings
2022-01-03T09:14:06.859Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:108:handleSettingsUpdate()) Set document root to: :/webconfig
2022-01-03T09:14:06.859Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:108:handleSettingsUpdate()) Set document root to: :/webconfig
2022-01-03T09:14:06.860Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver'
2022-01-03T09:14:06.960Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 0
2022-01-03T09:14:06.961Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[0], previousPriority[255]
2022-01-03T09:14:06.961Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:548:handlPriorityChangedLedDevice()) new source available -> switch LED-Device on
2022-01-03T09:14:06.999Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:238:setInputImage()) Priority 0 is now active
2022-01-03T09:14:07.011Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:198:setInput()) Priority 254 is now active
2022-01-03T09:14:07.186Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:238:setInputImage()) Priority 100 is now active
2022-01-03T09:14:07.291Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:174:handleSettingsUpdate()) Setup SSL certificate
2022-01-03T09:14:07.293Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:190:handleSettingsUpdate()) Setup private SSL key
2022-01-03T09:14:07.294Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver'
2022-01-03T09:14:08.249Z [hyperiond CEC] (INFO) CEC Handler initialized with adapter : RPI
2022-01-03T09:14:09.880Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:298:setCurrentTime()) Timeout clear for priority 0
2022-01-03T09:14:09.968Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.0.2
2022-01-03T09:14:09.970Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.0.2' switch to Hyperion instance 0
2022-01-03T09:14:10.130Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 100
2022-01-03T09:14:10.131Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[100], previousPriority[0]
2022-01-03T09:14:10.495Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.2

grbatrain · 3. Januar 2022

Moin. Habe Piccap auf meinem 55um71007lb installiert. Allerdings kommt immer „capture running; false“. Root rechte passen laut App & "public" ist ebenfalls gesetzt.

Dabei ist es egal welche Einstellungen ich in der App mache ob mein Hyperion Setup oder eine lokale Windows Installation angebe. Hat jmd eine Idee?

Gruß

grbatrain · 3. Januar 2022

Moin. Habe Piccap auf meinem 55um71007lb installiert. Allerdings kommt immer „capture running; false“.

Dabei ist es egal welche Settings in der App oder mein Hyperion Setup oder eine lokale Windows Installation zum Testen. Hat jmd eine Idee?

Gruß

grbatrain · 2. Januar 2022

hey guys ive got a weird problem. My capture card doenst seem to work anymore (no live video under hyperion web) & LEDs are not lighting up anymore.

In HomeAssistant & Hyperion Web i can see the colors (when i switch them it also shows the current color within HA & Hyperion Web) but the LEDs just wont turn on. Could it really be that the LEDs wont turn on to a normal color if the capture card isnt working?

I already tried to restart everything but that doesnt seem to help.

thanks for the help guys

Beiträge von grbatrain

PicCap - Hyperion Sender App | Ambilight for LG WebOS TVs

LEDs suddenly not working anymore | capture card broken? (even tho live capture shows colors)

PicCap

PicCap - Hyperion Sender App | Ambilight for LG WebOS TVs

LEDs suddenly not working anymore | capture card broken? (even tho live capture shows colors)