From what I see here https://insaneboard.de/blog/?p=2491 it would appear that the stk1160 is not working with Hyperion but does work with Hyperion NG.
I found https://github.com/hyperion-pr…eleases/tag/2.0.0-alpha.9 is there any guidance or docs about how to drop this into a HyperBian on a Pi? My guess would be Hyperion-2.0.0-alpha.9-Linux-armv6l.* but .deb or .tar.gz and how to apply or install it?
Beiträge von Maturity
-
-
Hi all,
I am trying to get this going but the capture part seems to be failing.I have the latest HyperBian image on a RPi 2 B+ with an old composite capture device connected to the composite "Montor out" from the receiver. The LED string is run by WLED and that part appears to be working fine.
The USB capture device appears to be recognized as an stk1160 device in the config and shows as "USB Capture: (V4L2:/dev/video0)" under source control.
In use the LEDs only occasionally flash briefly so I turned on the debug log and it is streaming with this message:
2020-11-19T14:20:44.406Z [hyperiond V4L2:/DEV/VIDEO0] (ERROR) Frame too small: 690520 != 691200Is there some magic setting that will get around this issue or is the capture device too old or primative. If so, would something like this work better?
Thanks