NG 2alpha9 restarts every 10 minutes

mrMuppet · 20. Dezember 2020

Hi,
My Installation runs on a rpi3b very smooth. But I crashes and automatically restarts every 10 min.

I cant find any logs and cant start with - d because I start with
sudo systemctl start hyperion.service

Any idea what I can do?

Ambientheater77 · 21. Dezember 2020

Zitat von mrMuppet

Hi,
My Installation runs on a rpi3b very smooth. But I crashes and automatically restarts every 10 min.

I cant find any logs and cant start with - d because I start with
sudo systemctl start hyperion.service

Any idea what I can do?

you can find the logs in Hyperion.NG webpage> localip:8090 tab [system] tab [log]

there choose debug log and upload to the forum

mrMuppet · 21. Dezember 2020

Not much here. Perhaps this is part of the problem?

Edit: wait... With debug-logging it fills up... will post.

mrMuppet · 22. Dezember 2020

Here is my logfile:

Code

2020-12-22T18:57:20.438Z [hyperiond DAEMON] (INFO) CEC handler created
2020-12-22T18:57:20.451Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
2020-12-22T18:57:20.458Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
2020-12-22T18:57:20.458Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory /root/.hyperion/custom-effects
2020-12-22T18:57:20.490Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:109:SettingsManager()) Settings database initialized
2020-12-22T18:57:20.493Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
2020-12-22T18:57:20.493Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2020-12-22T18:57:20.512Z [hyperiond DAEMON] (INFO) set screen capture device to 'dispmanx'
2020-12-22T18:57:20.512Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-12-22T18:57:20.514Z [hyperiond DISPMANXGRABBER] (INFO) Display opened with resolution: 720x480
2020-12-22T18:57:20.514Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 80, height: 45 for capture
2020-12-22T18:57:20.514Z [hyperiond DAEMON] (INFO) DISPMANX frame grabber created
2020-12-22T18:57:20.515Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-12-22T18:57:20.517Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal threshold set to: {12, 12, 12}
2020-12-22T18:57:20.518Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) CEC detection is now disabled
2020-12-22T18:57:20.518Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection is now disabled
2020-12-22T18:57:20.518Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2020-12-22T18:57:20.518Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:630:handleSettingsUpdate()) V4L2 grabber created
2020-12-22T18:57:20.519Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:28:JsonServer()) Created instance
2020-12-22T18:57:20.520Z [hyperiond JSONSERVER] (INFO) Started on port 19444
2020-12-22T18:57:20.520Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'sedu'.
2020-12-22T18:57:20.520Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2020-12-22T18:57:20.520Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2020-12-22T18:57:20.520Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"bgr","currentLedCount":66,"delayAfterConnect":250,"hardwareLedCount":1,"latchTime":10,"output":"/dev/ttyUSB0","rate":500000,"rewriteTime":5000,"type":"sedu"}]
2020-12-22T18:57:20.521Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 10ms
2020-12-22T18:57:20.521Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:428:setRewriteTime()) Refresh interval = 5000ms
2020-12-22T18:57:20.521Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 5000ms
2020-12-22T18:57:20.521Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:36:init()) DeviceType   : sedu
2020-12-22T18:57:20.522Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:37:init()) LedCount     : 66
2020-12-22T18:57:20.522Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:38:init()) ColorOrder   : bgr
2020-12-22T18:57:20.522Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:39:init()) RefreshTime  : 5000
2020-12-22T18:57:20.522Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:40:init()) LatchTime    : 10
2020-12-22T18:57:20.522Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:52:init()) deviceName   : ttyUSB0
2020-12-22T18:57:20.522Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:53:init()) AutoDevice   : 0
2020-12-22T18:57:20.522Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times
2020-12-22T18:57:20.522Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:54:init()) baudRate_Hz  : 500000
2020-12-22T18:57:20.522Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401
2020-12-22T18:57:20.524Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0
2020-12-22T18:57:20.522Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:55:init()) delayAfCon ms: 250
2020-12-22T18:57:20.525Z [hyperiond LEDDEVICE] (INFO) Opening UART: ttyUSB0
2020-12-22T18:57:20.526Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2020-12-22T18:57:20.526Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2020-12-22T18:57:20.526Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started
2020-12-22T18:57:20.527Z [hyperiond EFFECTENGINE] (INFO) Run effect "Warm mood blobs" on channel 254
2020-12-22T18:57:20.528Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Warm mood blobs], smoothCfg [2]
2020-12-22T18:57:20.528Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 254 as inactive
2020-12-22T18:57:20.528Z [hyperiond HYPERION] (INFO) Initial background effect 'Warm mood blobs' started
2020-12-22T18:57:20.530Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive
2020-12-22T18:57:20.530Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
2020-12-22T18:57:20.547Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0
2020-12-22T18:57:20.556Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Composite
2020-12-22T18:57:20.568Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:601:init_device()) Video standard=PAL
2020-12-22T18:57:20.568Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=720 height=576
2020-12-22T18:57:20.568Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV
2020-12-22T18:57:20.620Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started
2020-12-22T18:57:20.621Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2020-12-22T18:57:20.531Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2020-12-22T18:57:20.621Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started
2020-12-22T18:57:20.533Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:141:tryOpen()) _rs232Port.open(QIODevice::ReadWrite): ttyUSB0, Baud rate [500000]bps
2020-12-22T18:57:20.548Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2020-12-22T18:57:20.548Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2020-12-22T18:57:20.548Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
2020-12-22T18:57:20.557Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
2020-12-22T18:57:20.599Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2020-12-22T18:57:20.599Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2020-12-22T18:57:20.601Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2020-12-22T18:57:20.601Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2020-12-22T18:57:20.603Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver'
2020-12-22T18:57:20.606Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:175:handleSettingsUpdate()) Setup SSL certificate
2020-12-22T18:57:20.607Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:191:handleSettingsUpdate()) Setup private SSL key
2020-12-22T18:57:20.608Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver'
2020-12-22T18:57:20.623Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:146:tryOpen()) portName:          ttyUSB0
2020-12-22T18:57:20.624Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:147:tryOpen()) systemLocation:    /dev/ttyUSB0
2020-12-22T18:57:20.625Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:148:tryOpen()) description:       SEDU Board USB
2020-12-22T18:57:20.627Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:149:tryOpen()) manufacturer:      FTDI
2020-12-22T18:57:20.628Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:150:tryOpen()) productIdentifier: 0x6001
2020-12-22T18:57:20.629Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:151:tryOpen()) vendorIdentifier:  0x403
2020-12-22T18:57:20.630Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:152:tryOpen()) serialNumber:      SP0363
2020-12-22T18:57:20.636Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:173:tryOpen()) delayAfterConnect for 250 ms - start
2020-12-22T18:57:20.695Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active
2020-12-22T18:57:20.695Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2020-12-22T18:57:20.696Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255]
2020-12-22T18:57:20.696Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
2020-12-22T18:57:20.728Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active
2020-12-22T18:57:20.740Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:207:setInput()) Priority 254 is now active
2020-12-22T18:57:20.888Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:180:tryOpen()) delayAfterConnect for 250 ms - finished
2020-12-22T18:57:20.888Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2020-12-22T18:57:20.889Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2020-12-22T18:57:23.678Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0
2020-12-22T18:57:23.681Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2020-12-22T18:57:23.682Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2020-12-22T18:57:23.683Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0]
2020-12-22T18:57:23.928Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240
2020-12-22T18:57:23.930Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[0]
2020-12-22T19:02:25.304Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.99
2020-12-22T19:02:25.307Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.99' switch to Hyperion instance 0
2020-12-22T19:02:37.365Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.99

Alles anzeigen

Edit: Addes second block

Code

2020-12-22T21:36:11.174Z [hyperiond DAEMON] (INFO) CEC handler created
2020-12-22T21:36:11.187Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
2020-12-22T21:36:11.194Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
2020-12-22T21:36:11.194Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory /root/.hyperion/custom-effects
2020-12-22T21:36:11.226Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:109:SettingsManager()) Settings database initialized
2020-12-22T21:36:11.229Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
2020-12-22T21:36:11.229Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2020-12-22T21:36:11.249Z [hyperiond DAEMON] (INFO) set screen capture device to 'dispmanx'
2020-12-22T21:36:11.249Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-12-22T21:36:11.251Z [hyperiond DISPMANXGRABBER] (INFO) Display opened with resolution: 720x480
2020-12-22T21:36:11.251Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 80, height: 45 for capture
2020-12-22T21:36:11.252Z [hyperiond DAEMON] (INFO) DISPMANX frame grabber created
2020-12-22T21:36:11.253Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-12-22T21:36:11.255Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal threshold set to: {12, 12, 12}
2020-12-22T21:36:11.255Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) CEC detection is now disabled
2020-12-22T21:36:11.255Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection is now disabled
2020-12-22T21:36:11.255Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2020-12-22T21:36:11.255Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:630:handleSettingsUpdate()) V4L2 grabber created
2020-12-22T21:36:11.256Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:28:JsonServer()) Created instance
2020-12-22T21:36:11.257Z [hyperiond JSONSERVER] (INFO) Started on port 19444
2020-12-22T21:36:11.255Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'sedu'.
2020-12-22T21:36:11.255Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"bgr","currentLedCount":66,"delayAfterConnect":250,"hardwareLedCount":1,"latchTime":10,"output":"/dev/ttyUSB0","rate":500000,"rewriteTime":5000,"type":"sedu"}]
2020-12-22T21:36:11.255Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2020-12-22T21:36:11.256Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 10ms
2020-12-22T21:36:11.256Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:428:setRewriteTime()) Refresh interval = 5000ms
2020-12-22T21:36:11.256Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2020-12-22T21:36:11.256Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 5000ms
2020-12-22T21:36:11.257Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:36:init()) DeviceType   : sedu
2020-12-22T21:36:11.257Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:37:init()) LedCount     : 66
2020-12-22T21:36:11.257Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:38:init()) ColorOrder   : bgr
2020-12-22T21:36:11.257Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:39:init()) RefreshTime  : 5000
2020-12-22T21:36:11.257Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:40:init()) LatchTime    : 10
2020-12-22T21:36:11.257Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:52:init()) deviceName   : ttyUSB0
2020-12-22T21:36:11.257Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:53:init()) AutoDevice   : 0
2020-12-22T21:36:11.258Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:54:init()) baudRate_Hz  : 500000
2020-12-22T21:36:11.258Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:55:init()) delayAfCon ms: 250
2020-12-22T21:36:11.258Z [hyperiond LEDDEVICE] (INFO) Opening UART: ttyUSB0
2020-12-22T21:36:11.258Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:141:tryOpen()) _rs232Port.open(QIODevice::ReadWrite): ttyUSB0, Baud rate [500000]bps
2020-12-22T21:36:11.260Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times
2020-12-22T21:36:11.261Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401
2020-12-22T21:36:11.263Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0
2020-12-22T21:36:11.264Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2020-12-22T21:36:11.265Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2020-12-22T21:36:11.265Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started
2020-12-22T21:36:11.268Z [hyperiond EFFECTENGINE] (INFO) Run effect "Warm mood blobs" on channel 254
2020-12-22T21:36:11.269Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Warm mood blobs], smoothCfg [2]
2020-12-22T21:36:11.270Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 254 as inactive
2020-12-22T21:36:11.271Z [hyperiond HYPERION] (INFO) Initial background effect 'Warm mood blobs' started
2020-12-22T21:36:11.273Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive
2020-12-22T21:36:11.274Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
2020-12-22T21:36:11.285Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) configured v4l device: /dev/video0
2020-12-22T21:36:11.288Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:582:init_device()) Set device input to: Composite
2020-12-22T21:36:11.310Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:601:init_device()) Video standard=PAL
2020-12-22T21:36:11.310Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=720 height=576
2020-12-22T21:36:11.310Z [hyperiond V4L2:/DEV/VIDEO0] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV
2020-12-22T21:36:11.366Z [hyperiond V4L2:/DEV/VIDEO0] (INFO) Started
2020-12-22T21:36:11.367Z [hyperiond V4L2:/dev/video0] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2020-12-22T21:36:11.276Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2020-12-22T21:36:11.368Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started
2020-12-22T21:36:11.278Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
2020-12-22T21:36:11.286Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2020-12-22T21:36:11.288Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2020-12-22T21:36:11.286Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
2020-12-22T21:36:11.331Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:146:tryOpen()) portName:          ttyUSB0
2020-12-22T21:36:11.331Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:147:tryOpen()) systemLocation:    /dev/ttyUSB0
2020-12-22T21:36:11.332Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:148:tryOpen()) description:       SEDU Board USB
2020-12-22T21:36:11.332Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:149:tryOpen()) manufacturer:      FTDI
2020-12-22T21:36:11.333Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:150:tryOpen()) productIdentifier: 0x6001
2020-12-22T21:36:11.333Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:151:tryOpen()) vendorIdentifier:  0x403
2020-12-22T21:36:11.333Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:152:tryOpen()) serialNumber:      SP0363
2020-12-22T21:36:11.339Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:173:tryOpen()) delayAfterConnect for 250 ms - start
2020-12-22T21:36:11.346Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2020-12-22T21:36:11.346Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2020-12-22T21:36:11.346Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2020-12-22T21:36:11.348Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2020-12-22T21:36:11.349Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver'
2020-12-22T21:36:11.353Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:175:handleSettingsUpdate()) Setup SSL certificate
2020-12-22T21:36:11.354Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:191:handleSettingsUpdate()) Setup private SSL key
2020-12-22T21:36:11.354Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver'
2020-12-22T21:36:11.441Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active
2020-12-22T21:36:11.442Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2020-12-22T21:36:11.444Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255]
2020-12-22T21:36:11.445Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
2020-12-22T21:36:11.447Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active
2020-12-22T21:36:11.456Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:207:setInput()) Priority 254 is now active
2020-12-22T21:36:11.590Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRs232.cpp:180:tryOpen()) delayAfterConnect for 250 ms - finished
2020-12-22T21:36:11.591Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2020-12-22T21:36:11.592Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2020-12-22T21:36:13.459Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.99
2020-12-22T21:36:13.460Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.99' switch to Hyperion instance 0
2020-12-22T21:36:13.666Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.99
2020-12-22T21:36:13.680Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client  ::ffff:192.168.178.99
2020-12-22T21:36:14.428Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0
2020-12-22T21:36:14.428Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2020-12-22T21:36:14.429Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2020-12-22T21:36:14.429Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0]
2020-12-22T21:36:14.678Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240
2020-12-22T21:36:14.678Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[0]
2020-12-22T21:36:28.578Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.192
2020-12-22T21:36:28.579Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.192' switch to Hyperion instance 0
2020-12-22T21:36:34.410Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.192
2020-12-22T21:36:34.498Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client  ::ffff:192.168.178.192
2020-12-22T21:37:45.769Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) send close: 1000
2020-12-22T22:15:19.179Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:204:sendClose()) Previous line repeats 1 times
2020-12-22T22:15:19.180Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.99
2020-12-22T22:15:19.180Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.99' switch to Hyperion instance 0
2020-12-22T22:15:19.387Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.99

Alles anzeigen

mrMuppet · 27. Dezember 2020

Anyone here who can analyze my logfile?

Ambientheater77 · 27. Dezember 2020

Zitat von mrMuppet

Anyone here who can analyze my logfile?

what is rebooting,

-the PI software completely
-or only Hyperion systemd?

mrMuppet · 27. Dezember 2020

I'm not sure what is restarting. The light switches to a color preset for about 3-5 seconds, then I see the startup rainbow colors for about 3 Sec and then it's working again.

Edit: how do I Find out what restarts?

Ambientheater77 · 27. Dezember 2020

Zitat von mrMuppet

I'm not sure what is restarting. The light switches to a color preset for about 3-5 seconds, then I see the startup rainbow colors for about 3 Sec and then it's working again.

Edit: how do I Find out what restarts?

you can see that on your PI's led lights the green and red, if they switch off or not and start flickering

mrMuppet · 27. Dezember 2020

Zitat von jeroen warmerdam

you can see that on your PI's led lights the green and red, if they switch off or not and start flickering

I think it was only the hyperion systemd that restarted. No flickering and ssh still connected.

Ambientheater77 · 27. Dezember 2020

Zitat von mrMuppet

I think it was only the hyperion systemd that restarted. No flickering and ssh still connected.

then somewhere in the Hyperion system something causes a mallfunction in the program and because of a auto-script it starts the hyperion service again.

Ambientheater77 · 27. Dezember 2020

Zitat von mrMuppet

Hi,
My Installation runs on a rpi3b very smooth. But I crashes and automatically restarts every 10 min.

I cant find any logs and cant start with - d because I start with
sudo systemctl start hyperion.service

Any idea what I can do?

why you put commands into the terminal, Hyperion.NG 2.09 is autostart script?

NG 2alpha9 restarts every 10 minutes

Jetzt mitmachen!

Benutzer online in diesem Thema