Hello All!
I had problems with my sd card, so i had to reinstall latest Osmc system on my RPi3.
After I setup everything i tried to install Hyperion back on, with Hypercon.
Log from ssh traffic
Code
SSH Traffic:
ssh connected
ssh out: cd /tmp && wget -nv -N https://raw.github.com/hyperion-project/hyperion/master/bin/install_hyperion.sh && chmod +x install_hyperion.sh && sudo sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh
ssh out: Last-modified header missing -- time-stamps turned off.
ssh out: 2017-09-16 01:53:46 URL:https://raw.githubusercontent.com/hyperion-project/hyperion/master/bin/install_hyperion.sh [14552/14552] -> "install_hyperion.sh" [1]
ssh in: *******************************************************************************
ssh in: This script will install/update Hyperion Ambient Light
ssh in: Created by brindosch - hyperion-project.org - the official Hyperion source.
ssh in: *******************************************************************************
ssh in: ---> Stop Hyperion, if necessary
ssh in: ---> Install/Update Hyperion dependencies (This may take a while)
ssh out: debconf: unable to initialize frontend: Dialog
ssh out: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
ssh out: debconf: falling back to frontend: Readline
ssh out: debconf: unable to initialize frontend: Readline
ssh out: debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/arm-linux-gnueabihf/perl5/5.20 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7, <> line 21.)
ssh out: debconf: falling back to frontend: Teletype
ssh out: dpkg-preconfigure: unable to re-open stdin:
ssh in: Selecting previously unselected package fontconfig.
ssh in: (Reading database ...
ssh in: (Reading database ... 5%
ssh in: (Reading database ... 10%
ssh in: (Reading database ... 15%
ssh in: (Reading database ... 20%
ssh in: (Reading database ... 25%
ssh in: (Reading database ... 30%
ssh in: (Reading database ... 35%
ssh in: (Reading database ... 40%
ssh in: (Reading database ... 45%
ssh in: (Reading database ... 50%
ssh in: (Reading database ... 55%
ssh in: (Reading database ... 60%
ssh in: (Reading database ... 65%
ssh in: (Reading database ... 70%
ssh in: (Reading database ... 75%
ssh in: (Reading database ... 80%
ssh in: (Reading database ... 85%
ssh in: (Reading database ... 90%
ssh in: (Reading database ... 95%
ssh in: (Reading database ... 100%
ssh in: (Reading database ... 22782 files and directories currently installed.)
ssh in: Preparing to unpack .../fontconfig_2.11.0-6.3+deb8u1_armhf.deb ...
ssh in: Unpacking fontconfig (2.11.0-6.3+deb8u1) ...
ssh in: Selecting previously unselected package libxau6:armhf.
ssh in: Preparing to unpack .../libxau6_1%3a1.0.8-1_armhf.deb ...
ssh in: Unpacking libxau6:armhf (1:1.0.8-1) ...
ssh in: Selecting previously unselected package x11-common.
ssh in: Preparing to unpack .../x11-common_1%3a7.7+7_all.deb ...
ssh in: Unpacking x11-common (1:7.7+7) ...
ssh in: Selecting previously unselected package libice6:armhf.
ssh in: Preparing to unpack .../libice6_2%3a1.0.9-1+b1_armhf.deb ...
ssh in: Unpacking libice6:armhf (2:1.0.9-1+b1) ...
ssh in: Selecting previously unselected package libsm6:armhf.
ssh in: Preparing to unpack .../libsm6_2%3a1.2.2-1+b1_armhf.deb ...
ssh in: Unpacking libsm6:armhf (2:1.2.2-1+b1) ...
ssh in: Selecting previously unselected package libxdmcp6:armhf.
ssh in: Preparing to unpack .../libxdmcp6_1%3a1.1.1-1+b1_armhf.deb ...
ssh in: Unpacking libxdmcp6:armhf (1:1.1.1-1+b1) ...
ssh in: Selecting previously unselected package libxcb1:armhf.
ssh in: Preparing to unpack .../libxcb1_1.10-3+b1_armhf.deb ...
ssh in: Unpacking libxcb1:armhf (1.10-3+b1) ...
ssh in: Selecting previously unselected package libx11-data.
ssh in: Preparing to unpack .../libx11-data_2%3a1.6.2-3_all.deb ...
ssh in: Unpacking libx11-data (2:1.6.2-3) ...
ssh in: Selecting previously unselected package libx11-6:armhf.
ssh in: Preparing to unpack .../libx11-6_2%3a1.6.2-3_armhf.deb ...
ssh in: Unpacking libx11-6:armhf (2:1.6.2-3) ...
ssh in: Selecting previously unselected package libxt6:armhf.
ssh in: Preparing to unpack .../libxt6_1%3a1.1.4-1+b1_armhf.deb ...
ssh in: Unpacking libxt6:armhf (1:1.1.4-1+b1) ...
ssh in: Selecting previously unselected package libaudio2:armhf.
ssh in: Preparing to unpack .../libaudio2_1.9.4-3_armhf.deb ...
ssh in: Unpacking libaudio2:armhf (1.9.4-3) ...
ssh in: Selecting previously unselected package libmng1:armhf.
ssh in: Preparing to unpack .../libmng1_1.0.10+dfsg-3.1+b3_armhf.deb ...
ssh in: Unpacking libmng1:armhf (1.0.10+dfsg-3.1+b3) ...
ssh in: Selecting previously unselected package qtcore4-l10n.
ssh in: Preparing to unpack .../qtcore4-l10n_4%3a4.8.6+git64-g5dc8b2b+dfsg-3+deb8u1_all.deb ...
ssh in: Unpacking qtcore4-l10n (4:4.8.6+git64-g5dc8b2b+dfsg-3+deb8u1) ...
ssh in: Selecting previously unselected package libqtcore4:armhf.
ssh in: Preparing to unpack .../libqtcore4_4%3a4.8.6+git64-g5dc8b2b+dfsg-3+deb8u1_armhf.deb ...
ssh in: Unpacking libqtcore4:armhf (4:4.8.6+git64-g5dc8b2b+dfsg-3+deb8u1) ...
ssh in: Selecting previously unselected package libqt4-xml:armhf.
ssh in: Preparing to unpack .../libqt4-xml_4%3a4.8.6+git64-g5dc8b2b+dfsg-3+deb8u1_armhf.deb ...
ssh in: Unpacking libqt4-xml:armhf (4:4.8.6+git64-g5dc8b2b+dfsg-3+deb8u1) ...
ssh in: Selecting previously unselected package libqtdbus4:armhf.
ssh in: Preparing to unpack .../libqtdbus4_4%3a4.8.6+git64-g5dc8b2b+dfsg-3+deb8u1_armhf.deb ...
ssh in: Unpacking libqtdbus4:armhf (4:4.8.6+git64-g5dc8b2b+dfsg-3+deb8u1) ...
ssh in: Selecting previously unselected package libqt4-network:armhf.
ssh in: Preparing to unpack .../libqt4-network_4%3a4.8.6+git64-g5dc8b2b+dfsg-3+deb8u1_armhf.deb ...
ssh in: Unpacking libqt4-network:armhf (4:4.8.6+git64-g5dc8b2b+dfsg-3+deb8u1) ...
ssh in: Selecting previously unselected package libxext6:armhf.
ssh in: Preparing to unpack .../libxext6_2%3a1.3.3-1_armhf.deb ...
ssh in: Unpacking libxext6:armhf (2:1.3.3-1) ...
ssh in: Selecting previously unselected package libxrender1:armhf.
ssh in: Preparing to unpack .../libxrender1_1%3a0.9.8-1+b1_armhf.deb ...
ssh in: Unpacking libxrender1:armhf (1:0.9.8-1+b1) ...
ssh in: Selecting previously unselected package libqtgui4:armhf.
ssh in: Preparing to unpack .../libqtgui4_4%3a4.8.6+git64-g5dc8b2b+dfsg-3+deb8u1_armhf.deb ...
ssh in: Unpacking libqtgui4:armhf (4:4.8.6+git64-g5dc8b2b+dfsg-3+deb8u1) ...
ssh in: Selecting previously unselected package libusb-1.0-0:armhf.
ssh in: Preparing to unpack .../libusb-1.0-0_2%3a1.0.19-1_armhf.deb ...
ssh in: Unpacking libusb-1.0-0:armhf (2:1.0.19-1) ...
ssh in: Processing triggers for systemd (215-17+deb8u7) ...
ssh in: Setting up fontconfig (2.11.0-6.3+deb8u1) ...
ssh in: Regenerating fonts cache... done.
ssh in: Setting up libxau6:armhf (1:1.0.8-1) ...
ssh in: Setting up x11-common (1:7.7+7) ...
ssh in: debconf: unable to initialize frontend: Dialog
ssh in: debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
ssh in: debconf: falling back to frontend: Readline
ssh in: debconf: unable to initialize frontend: Readline
ssh in: debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/arm-linux-gnueabihf/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/arm-linux-gnueabihf/perl5/5.20 /usr/share/perl5 /usr/lib/arm-linux-gnueabihf/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
ssh in: debconf: falling back to frontend: Teletype
ssh in: /var/lib/dpkg/info/x11-common.postinst: 697: /var/lib/dpkg/info/x11-common.postinst: update-rc.d: not found
ssh in: dpkg: error processing package x11-common (--configure):
ssh in: subprocess installed post-installation script returned error exit status 127
ssh in: dpkg: dependency problems prevent configuration of libice6:armhf:
ssh in: libice6:armhf depends on x11-common; however:
ssh in: Package x11-common is not configured yet.
ssh in: dpkg: error processing package libice6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libsm6:armhf:
ssh in: libsm6:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: dpkg: error processing package libsm6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: Setting up libxdmcp6:armhf (1:1.1.1-1+b1) ...
ssh in: Setting up libxcb1:armhf (1.10-3+b1) ...
ssh in: Setting up libx11-data (2:1.6.2-3) ...
ssh in: Setting up libx11-6:armhf (2:1.6.2-3) ...
ssh in: dpkg: dependency problems prevent configuration of libxt6:armhf:
ssh in: libxt6:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: libxt6:armhf depends on libsm6; however:
ssh in: Package libsm6:armhf is not configured yet.
ssh in: dpkg: error processing package libxt6:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: dpkg: dependency problems prevent configuration of libaudio2:armhf:
ssh in: libaudio2:armhf depends on libxt6; however:
ssh in: Package libxt6:armhf is not configured yet.
ssh in: dpkg: error processing package libaudio2:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: Setting up libmng1:armhf (1.0.10+dfsg-3.1+b3) ...
ssh in: Setting up qtcore4-l10n (4:4.8.6+git64-g5dc8b2b+dfsg-3+deb8u1) ...
ssh in: Setting up libqtcore4:armhf (4:4.8.6+git64-g5dc8b2b+dfsg-3+deb8u1) ...
ssh in: Setting up libqt4-xml:armhf (4:4.8.6+git64-g5dc8b2b+dfsg-3+deb8u1) ...
ssh in: Setting up libqtdbus4:armhf (4:4.8.6+git64-g5dc8b2b+dfsg-3+deb8u1) ...
ssh in: Setting up libqt4-network:armhf (4:4.8.6+git64-g5dc8b2b+dfsg-3+deb8u1) ...
ssh in: Setting up libxext6:armhf (2:1.3.3-1) ...
ssh in: Setting up libxrender1:armhf (1:0.9.8-1+b1) ...
ssh in: dpkg: dependency problems prevent configuration of libqtgui4:armhf:
ssh in: libqtgui4:armhf depends on libaudio2; however:
ssh in: Package libaudio2:armhf is not configured yet.
ssh in: libqtgui4:armhf depends on libice6 (>= 1:1.0.0); however:
ssh in: Package libice6:armhf is not configured yet.
ssh in: libqtgui4:armhf depends on libsm6; however:
ssh in: Package libsm6:armhf is not configured yet.
ssh in: dpkg: error processing package libqtgui4:armhf (--configure):
ssh in: dependency problems - leaving unconfigured
ssh in: Setting up libusb-1.0-0:armhf (2:1.0.19-1) ...
ssh in: Processing triggers for libc-bin (2.19-18+deb8u10) ...
ssh in: Processing triggers for systemd (215-17+deb8u7) ...
ssh in: Errors were encountered while processing:
ssh in: x11-common
ssh in: libice6:armhf
ssh in: libsm6:armhf
ssh in: libxt6:armhf
ssh in: libaudio2:armhf
ssh in: libqtgui4:armhf
ssh out: E: Sub-process /usr/bin/dpkg returned an error code (1)
ssh in: ---> Raspberry Pi found, but SPI is not set, we write "dtparam=spi=on" to /boot/config.txt
ssh in: ---> Downloading the appropriate Hyperion release
ssh out: 2017-09-16 01:55:36 URL:https://10gbps-io.dl.sourceforge.net/project/hyperion-project/release/hyperion_rpi3_osmc.tar.gz [1639953/1639953] -> "-" [1]
ssh in: ---> Installing systemd script
ssh in: ---> Modify systemd script for OSMC usage
ssh in: ---> Starting Hyperion
ssh in: *******************************************************************************
ssh in: Hyperion Installation/Update finished!
ssh in: Please download the latest HyperCon version to benefit from new features!
ssh in: To create a config, follow the HyperCon Guide at our Wiki (EN/DE)!
ssh in: Wiki: wiki.hyperion-project.org Webpage: www.hyperion-project.org
ssh in: *******************************************************************************
ssh in: Rebooting now, we added dtparam=spi=on to config.txt
Alles anzeigen
Log from terminal: sudo service hyperion status
Code
* hyperion.service - Hyperion Systemd service
Loaded: loaded (/etc/systemd/system/hyperion.service; enabled)
Active: failed (Result: start-limit) since Sat 2017-09-16 01:55:44 CEST; 2min 43s ago
Process: 491 ExecStart=/usr/bin/hyperiond /etc/hyperion/hyperion.config.json (code=exited, status=1/FAILURE)
Main PID: 491 (code=exited, status=1/FAILURE)
Sep 16 01:55:43 Medijskicenter systemd[1]: Unit hyperion.service entered failed state.
Sep 16 01:55:44 Medijskicenter systemd[1]: hyperion.service holdoff time over, scheduling restart.
Sep 16 01:55:44 Medijskicenter systemd[1]: Stopping Hyperion Systemd service...
Sep 16 01:55:44 Medijskicenter systemd[1]: Starting Hyperion Systemd service...
Sep 16 01:55:44 Medijskicenter systemd[1]: hyperion.service start request repeated too quickly...rt.
Sep 16 01:55:44 Medijskicenter systemd[1]: Failed to start Hyperion Systemd service.
Sep 16 01:55:44 Medijskicenter systemd[1]: Unit hyperion.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
Alles anzeigen
Any idea what could be wrong?