I'm running on OSMC on an RPi 3, with two Lightpacks. Previously running Hyperion Classic with no issues, tried upgrading to NG alpha 8 today. Installation via deb seemed to work fine (did need to install libcec later), but I'm not getting any output at all out of my Lightpacks no matter what I do, including setting it to solid colour. Getting the occasional LIBUSB_ERROR_PIPE in my logs, but not consistently, and nothing else that is obviously wrong (to me). The logs suggest the two lightpacks are being detected properly. I've also tried with only one lightpack configured and still nothing.
Any ideas how to get this working?
Thanks
Debug log after restarting:
Code
2020-10-08T17:41:32.683Z [hyperiond DAEMON] (INFO) CEC handler created
2020-10-08T17:41:32.699Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
2020-10-08T17:41:32.706Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
2020-10-08T17:41:32.707Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory /root/.hyperion/custom-effects
2020-10-08T17:41:32.743Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:107:SettingsManager()) Settings database initialized
2020-10-08T17:41:32.745Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
2020-10-08T17:41:32.745Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2020-10-08T17:41:32.892Z [hyperiond DAEMON] (INFO) set screen capture device to 'dispmanx'
2020-10-08T17:41:32.893Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-10-08T17:41:32.896Z [hyperiond DISPMANXGRABBER] (INFO) Display opened with resolution: 1920x1080
2020-10-08T17:41:32.897Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 80, height: 45 for capture
2020-10-08T17:41:32.897Z [hyperiond DAEMON] (INFO) DISPMANX frame grabber created
2020-10-08T17:41:32.899Z [hyperiond V4L2:AUTO] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-10-08T17:41:32.901Z [hyperiond V4L2:AUTO] (INFO) Signal threshold set to: {12, 12, 12}
2020-10-08T17:41:32.901Z [hyperiond V4L2:AUTO] (INFO) CEC detection is now disabled
2020-10-08T17:41:32.901Z [hyperiond V4L2:AUTO] (INFO) Signal detection is now disabled
2020-10-08T17:41:32.902Z [hyperiond V4L2:AUTO] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2020-10-08T17:41:32.902Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:568:handleSettingsUpdate()) V4L2 grabber created
2020-10-08T17:41:32.903Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:27:JsonServer()) Created instance
2020-10-08T17:41:32.904Z [hyperiond JSONSERVER] (INFO) Started on port 19444
2020-10-08T17:41:32.907Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
2020-10-08T17:41:32.908Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
2020-10-08T17:41:32.909Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:32:initServer()) Initialize Webserver
2020-10-08T17:41:32.916Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:32:initServer()) Initialize Webserver
2020-10-08T17:41:32.932Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'multilightpack'.
2020-10-08T17:41:32.932Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:147:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":26,"hardwareLedCount":1,"latchTime":11,"rewriteTime":1000,"type":"multilightpack"}]
2020-10-08T17:41:32.933Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:403:setLatchTime()) LatchTime updated to 11ms
2020-10-08T17:41:32.932Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2020-10-08T17:41:32.933Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:423:setRewriteTime()) Refresh interval = 1000ms
2020-10-08T17:41:32.933Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:429:setRewriteTime()) RewriteTime updated to 1000ms
2020-10-08T17:41:32.933Z [hyperiond LedDevice] (DEBUG) (LedDeviceMultiLightpack.cpp:174:getLightpackSerials()) Getting list of Lightpack serials
2020-10-08T17:41:32.936Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401
2020-10-08T17:41:32.938Z [hyperiond EFFECTENGINE] (INFO) Run effect "Rainbow swirl fast" on channel 0
2020-10-08T17:41:32.940Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2020-10-08T17:41:32.940Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2020-10-08T17:41:32.941Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Rainbow swirl fast' started
2020-10-08T17:41:32.942Z [hyperiond EFFECTENGINE] (INFO) Run effect "Warm mood blobs" on channel 254
2020-10-08T17:41:32.943Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Warm mood blobs], smoothCfg [2]
2020-10-08T17:41:32.943Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/EFFECT' with priority 254 as inactive
2020-10-08T17:41:32.944Z [hyperiond HYPERION] (INFO) Inital background effect 'Warm mood blobs' started
2020-10-08T17:41:32.945Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'System/GRABBER' with priority 250 as inactive
2020-10-08T17:41:32.945Z [hyperiond LedDevice] (INFO) USB context initialized in multi Lightpack device
2020-10-08T17:41:32.945Z [hyperiond LedDevice] (INFO) Found a Lightpack device. Retrieving serial...
2020-10-08T17:41:32.947Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: enabled
2020-10-08T17:41:32.948Z [hyperiond Dispmanx] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2020-10-08T17:41:32.950Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2020-10-08T17:41:32.951Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started
2020-10-08T17:41:32.952Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:90:handleSettingsUpdate()) Apply Webserver settings
2020-10-08T17:41:32.952Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:90:handleSettingsUpdate()) Apply Webserver settings
2020-10-08T17:41:32.952Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:108:handleSettingsUpdate()) Set document root to: :/webconfig
2020-10-08T17:41:32.952Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:108:handleSettingsUpdate()) Set document root to: :/webconfig
2020-10-08T17:41:32.954Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver'
2020-10-08T17:41:32.957Z [hyperiond LedDevice] (INFO) Lightpack device found with serial 95331313130351302281
2020-10-08T17:41:32.957Z [hyperiond LedDevice] (INFO) Found a Lightpack device. Retrieving serial...
2020-10-08T17:41:32.963Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:174:handleSettingsUpdate()) Setup SSL certificate
2020-10-08T17:41:32.963Z [hyperiond LedDevice] (INFO) Lightpack device found with serial 95230303231351212130
2020-10-08T17:41:32.964Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:190:handleSettingsUpdate()) Setup private SSL key
2020-10-08T17:41:32.964Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver'
2020-10-08T17:41:32.965Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'unspecified'.
2020-10-08T17:41:32.966Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:147:init()) deviceConfig: [{"latchTime":11,"rewriteTime":1000,"serial":"95331313130351302281"}]
2020-10-08T17:41:32.966Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:403:setLatchTime()) LatchTime updated to 11ms
2020-10-08T17:41:32.966Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:423:setRewriteTime()) Refresh interval = 1000ms
2020-10-08T17:41:32.966Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:429:setRewriteTime()) RewriteTime updated to 1000ms
2020-10-08T17:41:32.976Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceLightpack.cpp:82:init()) USB context initialized
2020-10-08T17:41:32.977Z [hyperiond LEDDEVICE] (INFO) Found a Lightpack device. Retrieving more information...
2020-10-08T17:41:32.983Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceLightpack.cpp:199:testAndOpen()) Lightpack device found: bus=1 address=8 serial=95331313130351302281
2020-10-08T17:41:32.983Z [hyperiond LEDDEVICE] (INFO) Lightpack device successfully opened
2020-10-08T17:41:32.986Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceLightpack.cpp:266:testAndOpen()) Lightpack device opened: bus=1 address=8 serial=95331313130351302281 version=6.5.
2020-10-08T17:41:32.986Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'unspecified'.
2020-10-08T17:41:32.987Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:147:init()) deviceConfig: [{"latchTime":11,"rewriteTime":1000,"serial":"95230303231351212130"}]
2020-10-08T17:41:32.987Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:403:setLatchTime()) LatchTime updated to 11ms
2020-10-08T17:41:32.987Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:423:setRewriteTime()) Refresh interval = 1000ms
2020-10-08T17:41:32.987Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:429:setRewriteTime()) RewriteTime updated to 1000ms
2020-10-08T17:41:32.998Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceLightpack.cpp:82:init()) USB context initialized
2020-10-08T17:41:32.998Z [hyperiond LEDDEVICE] (INFO) Found a Lightpack device. Retrieving more information...
2020-10-08T17:41:33.003Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceLightpack.cpp:199:testAndOpen()) Lightpack device found: bus=1 address=8 serial=95331313130351302281
2020-10-08T17:41:33.004Z [hyperiond LEDDEVICE] (INFO) Found a Lightpack device. Retrieving more information...
2020-10-08T17:41:33.007Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceLightpack.cpp:199:testAndOpen()) Lightpack device found: bus=1 address=7 serial=95230303231351212130
2020-10-08T17:41:33.008Z [hyperiond LEDDEVICE] (INFO) Lightpack device successfully opened
2020-10-08T17:41:33.010Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceLightpack.cpp:266:testAndOpen()) Lightpack device opened: bus=1 address=7 serial=95230303231351212130 version=6.5.
2020-10-08T17:41:33.011Z [hyperiond LEDDEVICE] (INFO) 2 Lightpack devices were found
2020-10-08T17:41:33.011Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2020-10-08T17:41:33.045Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:238:setInputImage()) Priority 250 is now active
2020-10-08T17:41:33.045Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 0
2020-10-08T17:41:33.045Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[0], previousPriority[255]
2020-10-08T17:41:33.045Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:548:handlPriorityChangedLedDevice()) new source available -> switch LED-Device on
2020-10-08T17:41:33.215Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:238:setInputImage()) Priority 0 is now active
2020-10-08T17:41:33.218Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:198:setInput()) Priority 254 is now active
2020-10-08T17:41:36.219Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:298:setCurrentTime()) Timeout clear for priority 0
2020-10-08T17:41:36.295Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.0.101
2020-10-08T17:41:36.296Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.0.101' switch to Hyperion instance 0
2020-10-08T17:41:36.468Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 250
2020-10-08T17:41:36.469Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[250], previousPriority[0]
2020-10-08T17:41:36.893Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.101
2020-10-08T17:41:36.919Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1041:handleLoggingCommand()) log streaming deactivated for client ::ffff:192.168.0.101
2020-10-08T17:41:59.067Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:159:registerInput()) Register new input 'Web Configuration@::ffff:192.168.0.101/COLOR' with priority 1 as inactive
2020-10-08T17:41:59.068Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:198:setInput()) Priority 1 is now active
2020-10-08T17:41:59.069Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:333:setCurrentTime()) Set visible priority to 1
2020-10-08T17:41:59.069Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:538:handlPriorityChangedLedDevice()) priority[1], previousPriority[250]
2020-10-08T17:42:01.777Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:103:newConnection()) New connection from: ::ffff:192.168.0.106
2020-10-08T17:42:01.778Z [hyperiond JSONCLIENTCONNECTION] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.0.249' switch to Hyperion instance 0
2020-10-08T17:42:01.798Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1032:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.0.101
Alles anzeigen