Hi guys, this is my first time using rasperypi for ambilight purposes
I've been playing around a lot with the previous hyperion, now I'm on hyperion ng using the hyperian image baked on raspberry pi 1
First I was using a HDMI2AV module + a video grabber AV to USB, but the resolution on YUYV was very low compared to the MJPG one.
Now I have purchased an HDMI capturer which comes with higher resolutions, but still the one on MJPG comes with way more fps.
I was wondering if there's any way to force the MJPG format, in previous hyperion I was able to modify the resolution by using a prestart command on the service, but in hyperian ng everything gets overwritten everytime I start the service.
I tried modifying the `hyperion-v4l2` and `v4l2-ctl`, I have no idea about their differences to be honest don't know which one is used in which case, I tried both, `hyperion-v4l2` doesn't support MJPG and `v4l2-ctl` doesn't seem to persist as its reseted after service starts.
I'm checking the current value with `v4l2-ctl --get-fmt-video` and setting the value with `sudo v4l2-ctl --set-fmt-video=width=1920,height=1080,pixelformat=MJPG`
Thanks a lot in advance.
PS: sorry for the probable wrong prefix on the thread