But it works with hypercon just fine without touching the hardware...
So it needs to be something software related.... Is it another implementation of ws281x in NG as Hypercon?
But it works with hypercon just fine without touching the hardware...
So it needs to be something software related.... Is it another implementation of ws281x in NG as Hypercon?
whats the hardware setup? like ledstriptype and such
Its a 4 pin strip (but 2 of the pins are ground) Google says: (IClite) on basis of TMS1829.
Its a 4 pin strip (but 2 of the pins are ground) Google says: (IClite) on basis of TMS1829.
you connected the ledstrip on what GPIO? what are you running SPI or PWM?
Its a 4 pin strip (but 2 of the pins are ground) Google says: (IClite) on basis of TMS1829.
i see its an ALDI ledstrip, so you purchased it there and then connected it to this software
this is a 12v ledstrip https://blog.thesen.eu/aldi-rg…-mit-dem-arduino-steuern/
Yes its 12v (power from original supply) Ground to supply and rpi, data only to GPIO 12 ...
Yes its 12v (power from original supply) Ground to supply and rpi, data only to GPIO 12 ...
i get it but i think you have to steer this on Hyperion.NG with adalight on Arduino.
I think its much easier for you to purchase a supported ledstrip in libraries of Hyperion.NG ( you can see this in WebUI) then try to awake this strip with weird technology that is not really supported by the software ( anymore)
I am not saying its a bad strip or such, but sometimes when software and hardware don't want to interact together then its the better choice to bring one to another
Allright. Makes sense... This cheapo strip can also only adress every 3 leds... Gonna close it now... Thanks for taking time
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!