Hello, I'm trying to get Hyperion set up for the first time and was hoping for some help with a problem. My end goal is to use HyperBian with HDMI input and an LED strip wired to the GPIO. I have a Pi 3B and splitter/capture devices for HDMI but don't have an LED strip, and wanted to try to get a feel for Hyperion before buying more hardware. I noticed Hyperion supports Yeelight, and I have a couple of Color S1 bulbs, so I'm trying to set these up as a first step.
Installing Hyperion on the Pi and accessing the web interface is straightforward. The USB capture seems to work fine, and I've also tried the 3rd-party Android app as an alternate source - both appearing in the live feed and showing an appropriate hue in the LED overlay.
However the bulb itself never seems to change, although it does respond when testing with the wizard. Trying to load an effect via Effect Configurator will appear successful in the UI, and load the effect in Remote Control > Source Selection, but still has no impact on the bulb.
These are the logs from the webUI: [MEDIA=pastebin]8rc4ytiS[/MEDIA]
(I couldn't seem to find the logs on the Hyperbian file system over SSH, if someone could point me there that would also be appreciated)