Hello,
I am running Hyperion on a Rpi4/8G. I have the following hdmi capture device:
BlueAVS HDMI to USB Video Capture Card 1080P for Live Video Streaming Record via DSLR Camcorder Action Cam - Capture 1080P@30Hz (Metal-Gray)
- Support input resolution 4K 60Hz, output resolution 1080P 30Hz
My 5 port switch is:
Orei 1x2 2.0 HDMI Splitter 2 Ports with Full Ultra HDCP 2.2, 4K at 60Hz & 3D Supports EDID Control - HDY-102
My HDMI switch is:
E-SDS UHD 4K@60Hz HDMI Switch ,5x1 HDMI Switch with IR Wireless Remote, Auto EDID, HDMI 2.0, HDCP 2.2, and RS232
And I have an older LG 4K UHD TV.
I have 5 devices that connect to a 5 port HDMI switch with:
- Roku
- uVerse
- XBox 360
- Pi retro gaming system
- PC
The output from the switch goes to the splitter with 1 feed going to the TV and the other going to the HDMI Capture device.
When I have the uVerse/XBox/Retro Pi selected, it works fine. But when I switch over to the Roku, I get nothing. Same switch, same splitter.
I have even downgraded the output of my Roku to 1080P. No change.
I use signal detecting and have tried disabling it. No change.
Part of me things this is an issue with my infrastructure, but it works with everything except the Roku.
Any ideas?