WS2811 (3 LEDs/segment) vs WS2815 Individually addressable?

  • Change WS2811/12V to WS2815/12v with 4K 55" TV for better effect? 1

    1. Don't know (1) 100%
    2. Yes (0) 0%
    3. No (0) 0%

    I have made the change on my ambient TV lighting from WS2812 5V individually addressable LEDs @30 per meter to WS2811 12V @ 60 per meter but which address 3 LED's/segment (which took me a while to figure out what was wrong with the LED count!). I am wondering, for a 55" 4K TV, is it worth it to change yet again to WS2815 12V @ 60 per meter individually addressable???

  • It is best to use SK6812 RGBW-NW 30 LED/m if you are more than 15 cm away from the wall, otherwise 60 LED/m.


    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    -
    AudioDSP: miniDSP 2x4HD - Amp: Pentagon - Lautsprecher ELAC / ARENDAL
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    -
    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.16-beta.1 (dreamOS)
    Hyperion-ng (Debian bullseye)
    -
    6 x ESP32/Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    FeinTech VSP01201 - Grabber Macrosilicon

    LG TV Hyperion webOS & PicCap


    snoozer_likelinux_manvtkns.gif


    Ambilight for ever

  • from personal experience, I have the TV 6cm from the wall but with APA102 30l/mtr there is little visible (gap) between the leds. I can rotate and alter the angle but then it's still there at the bottom leds...


    Because the angle is 120 degrees the leds shining is not 100% in angle towards the wall.

    Thatswhy I decided to go for the HD107s 60l/mtr that I ordered now to compensate that little gap, and because the ledstrip is already 2 years old


    So, wall to close to the TV 📺 means you need more leds/mtr

  • SK6812 RGBW best colors.

    HD107s/HD108s good colors best speed.


    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    -
    AudioDSP: miniDSP 2x4HD - Amp: Pentagon - Lautsprecher ELAC / ARENDAL
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    -
    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.16-beta.1 (dreamOS)
    Hyperion-ng (Debian bullseye)
    -
    6 x ESP32/Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    FeinTech VSP01201 - Grabber Macrosilicon

    LG TV Hyperion webOS & PicCap


    snoozer_likelinux_manvtkns.gif


    Ambilight for ever

  • And what exactly is the problem?

    If there is WLED on it, the mentioned LED types should work with it.


    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    -
    AudioDSP: miniDSP 2x4HD - Amp: Pentagon - Lautsprecher ELAC / ARENDAL
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    -
    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.16-beta.1 (dreamOS)
    Hyperion-ng (Debian bullseye)
    -
    6 x ESP32/Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    FeinTech VSP01201 - Grabber Macrosilicon

    LG TV Hyperion webOS & PicCap


    snoozer_likelinux_manvtkns.gif


    Ambilight for ever

  • Athom has 4 or so different models...
    I have this 16w one without white: https://www.athom.tech/blank-1…ower-led-strip-controller

    This is the 16w RGBW model: https://www.athom.tech/blank-1…bw-light-strip-controller


    I could change to HD107s on my LS4P-WLED but would need the LS5P-WLED model to use the SK6812 strip.

    I have noticed a response difference with the WS2812-60/m-12V vs the WS2811-30/m-5V I had before but I think that is possibly due to the number of addressable LEDs/segments? With 2811-30 I had 114 addressable LEDs and now with 2811-60 I have only 76 addressable segments. My strip length is 3.86m...

  • Both have WLED firmware, can't you select SK6812 in the WLED WebUI > LED Preferences?


    regards pclin

  • 16w

    Strip types support: WS2812B WS2811 WS2813 WS2815 SK6812 TM1814 APA102 WS2801 LDP8806 GS8208


    16w RGBW

    Notice: This is for RGBW only, not for addressable LED stip.

    Unsuitable for Ambilight!


    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    -
    AudioDSP: miniDSP 2x4HD - Amp: Pentagon - Lautsprecher ELAC / ARENDAL
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    -
    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.16-beta.1 (dreamOS)
    Hyperion-ng (Debian bullseye)
    -
    6 x ESP32/Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    FeinTech VSP01201 - Grabber Macrosilicon

    LG TV Hyperion webOS & PicCap


    snoozer_likelinux_manvtkns.gif


    Ambilight for ever

  • Watts was a typo. They're rated for 16 amps so at 5V that's 80 watts.


    I see the light now! The RGBW-NW part had misled me. :sleeping:
    LS4P high power addressable controller is fine with SK6812!

    I'll just need a larger 5V power supply since the one I have is only 40W.

    2 Mal editiert, zuletzt von clrity () aus folgendem Grund: Merged a post created by clrity into this post.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!