capture device not being recognized

  • My capture card isn't being recognized in the Hyperion web interface and I don't know how to fix it.

    Its being recognized on the pi but not in Hyperion and I don't want to have to buy a new one.

    I'm using a j5create HDMI to USB adapter.

    I've tried plugging into all the different USB's that the pi has and then restarting Hyperion but it hasn't worked.

  • how would i do that? OBS?


    i plugged it in and opened device manager the highlighted one is the capture device

    but when I go into OBS the device does not popup

    here is what I get when running lsusb for the device


    hyperion@raspberrypi:~ $ lsusb -v -d 0711:5600

    Bus 002 Device 002: ID 0711:5600 Magic Control Technology Corp. T6 USB Station
    Couldn't open device, some information will be missing
    Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.10 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x0711 Magic Control Technology Corp. idProduct 0x5600 bcdDevice 10.10 iManufacturer 1 MCT Corp. iProduct 2 T6 USB Station iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0039 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 248mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 bMaxBurst 0
    hyperion@raspberrypi:~ $

    ive looked at the page for the adapter but it said no drivers needed however it only talks about windows and mac

    Edited once, last by crecker: Merged a post created by crecker into this post. ().

  • so would what im using work its hooks up to hdmi them into usb 3.0

  • His,


    this device is an output device, you can connect a monitor to it. Look at the feature list, first point. You will need an input device for hyperion, even if it looks the same this device will not work.


    wbr

  • ok i switched the device to an HDMI capture everything is woking

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!