Hi All and many thanks in advance. Mods: please move this post if this is not the correct forum
I'm thinking there is a communication issue between the Pi and the Arduino as everything works perfectly when the Arduino is connected to a PC running the Adalight Processing sketch but nada when connected to the Pi.
Hyperion installed without a hitch using HyperCon on the Pi and based on logs, is responding to video, etc and even the remote Android app. However, there seems to be a lack of communication Pi --> Arduino as the indicators (small led arduino lights) show no activity except when connected to the PC.
Too, other sketches sent to the Arduino work as expected (TwinkleFox, Demo Reel, etc etc). The initial Hyperion rainbow swirl effect never displays and when I select an effect from the Android app such as Knight Rider, it too does not display yet, the log shows the command being executed and seemingly without error.
I'm using RPi with RasPlex connected to an Arduino Uno controlling 50 WS2811 (3-wire) string LEDs. LEDs are powered with a 5v 10A supply. The Arduino and Pi are powered separately with their respective power supplies so, there is no backpowering of devices in order to rule out those issues. The Arduino is connected to the Pi via USB with no other USB peripherals attached.
The external frame grabber is disabled as I'm, at this point, going to only use the internal option for videos played via Plex.
LEDs are connected to pin 6 of the Arduino with LED ground connected as well. Pi is connected via HDMI to the telly along with ethernet, of course.
Pi is SPI-enabled as confirmed within config.txt:
Curiously, at the end of the file are these entries which duplicates the spi=on function but also adjusts the UART speed:
Arduino is using the "official" Hyperion sketch:
#include "FastLED.h"
#define ANALOG_MODE_AVERAGE 0
#define ANALOG_MODE_LAST_LED 1
/**************************************
S E T U P
set following values to your needs
**************************************/
#define INITIAL_LED_TEST_ENABLED true
#define INITIAL_LED_TEST_BRIGHTNESS 32 // 0..255
#define INITIAL_LED_TEST_TIME_MS 500 // 10..
// Number of leds in your strip. set to "1" and ANALOG_OUTPUT_ENABLED to "true" to activate analog only
// As of 26/1/2017:
// 582 leaves ZERO bytes free and this
// 410 is ok
// tested with 500 leds and is fine (despite the warning)
#define MAX_LEDS 200
// type of your led controller, possible values, see below
#define LED_TYPE WS2812B
// 3 wire (pwm): NEOPIXEL BTM1829 TM1812 TM1809 TM1804 TM1803 UCS1903 UCS1903B UCS1904 UCS2903 WS2812 WS2852
// S2812B SK6812 SK6822 APA106 PL9823 WS2811 WS2813 APA104 WS2811_40 GW6205 GW6205_40 LPD1886 LPD1886_8BIT
// 4 wire (spi): LPD8806 WS2801 WS2803 SM16716 P9813 APA102 SK9822 DOTSTAR
// For 3 wire led stripes line Neopixel/Ws2812, which have a data line, ground, and power, you just need to define DATA_PIN.
// For led chipsets that are SPI based (four wires - data, clock, ground, and power), both defines DATA_PIN and CLOCK_PIN are needed
// DATA_PIN, or DATA_PIN, CLOCK_PIN
#define LED_PINS 6 // 3 wire leds
//#define LED_PINS 6, 13 // 4 wire leds
#define COLOR_ORDER RGB // colororder of the stripe, set RGB in hyperion
#define OFF_TIMEOUT 15000 // ms to switch off after no data was received, set 0 to deactivate
// analog rgb uni color led stripe - using of hyperion smoothing is recommended
// ATTENTION this pin config is default for atmega328 based arduinos, others might work to
// if you have flickering analog leds this might be caused by unsynced pwm signals
// try other pins is more or less the only thing that helps
#define ANALOG_OUTPUT_ENABLED false
#define ANALOG_MODE ANALOG_MODE_LAST_LED // use ANALOG_MODE_AVERAGE or ANALOG_MODE_LAST_LED
#define ANALOG_GROUND_PIN 8 // additional ground pin to make wiring a bit easier
#define ANALOG_RED_PIN 9
#define ANALOG_GREEN_PIN 10
#define ANALOG_BLUE_PIN 11
// overall color adjustments
#define ANALOG_BRIGHTNESS_RED 255 // maximum brightness for analog 0-255
#define ANALOG_BRIGHTNESS_GREEN 255 // maximum brightness for analog 0-255
#define ANALOG_BRIGHTNESS_BLUE 255 // maximum brightness for analog 0-255
#define BRIGHTNESS 255 // maximum brightness 0-255
#define DITHER_MODE BINARY_DITHER // BINARY_DITHER or DISABLE_DITHER
#define COLOR_TEMPERATURE CRGB(255,255,255) // RGB value describing the color temperature
#define COLOR_CORRECTION TypicalLEDStrip // predefined fastled color correction
//#define COLOR_CORRECTION CRGB(255,255,255) // or RGB value describing the color correction
// Baudrate, higher rate allows faster refresh rate and more LEDs
//#define serialRate 460800 // use 115200 for ftdi based boards
#define serialRate 115200 // use 115200 for ftdi based boards
//#define serialRate 500000 // use 115200 for ftdi based boards
/**************************************
A D A L I G H T C O D E
no user changes needed
**************************************/
// Adalight sends a "Magic Word" (defined in /etc/boblight.conf) before sending the pixel data
uint8_t prefix[] = {'A', 'd', 'a'}, hi, lo, chk, i;
unsigned long endTime;
// Define the array of leds
CRGB leds[MAX_LEDS];
// set rgb to analog led stripe
void showAnalogRGB(const CRGB& led) {
if (ANALOG_OUTPUT_ENABLED) {
byte r = map(led.r, 0,255,0,ANALOG_BRIGHTNESS_RED);
byte g = map(led.g, 0,255,0,ANALOG_BRIGHTNESS_GREEN);
byte b = map(led.b, 0,255,0,ANALOG_BRIGHTNESS_BLUE);
analogWrite(ANALOG_RED_PIN , r);
analogWrite(ANALOG_GREEN_PIN, g);
analogWrite(ANALOG_BLUE_PIN , b);
}
}
// set color to all leds
void showColor(const CRGB& led) {
#if MAX_LEDS > 1 || ANALOG_OUTPUT_ENABLED == false
LEDS.showColor(led);
#endif
showAnalogRGB(led);
}
// switch of digital and analog leds
void switchOff() {
#if MAX_LEDS > 1 || ANALOG_OUTPUT_ENABLED == false
memset(leds, 0, MAX_LEDS * sizeof(struct CRGB));
FastLED.show();
#endif
showAnalogRGB(leds[0]);
}
// function to check if serial data is available
// if timeout occured leds switch of, if configured
bool checkIncommingData() {
boolean dataAvailable = true;
while (!Serial.available()) {
if ( OFF_TIMEOUT > 0 && endTime < millis()) {
switchOff();
dataAvailable = false;
endTime = millis() + OFF_TIMEOUT;
}
}
return dataAvailable;
}
// main function that setups and runs the code
void setup() {
Serial.begin(serialRate);
// analog output
if (ANALOG_OUTPUT_ENABLED) {
// additional ground pin to make wiring a bit easier
pinMode(ANALOG_GROUND_PIN, OUTPUT);
digitalWrite(ANALOG_GROUND_PIN, LOW);
pinMode(ANALOG_BLUE_PIN , OUTPUT);
pinMode(ANALOG_RED_PIN , OUTPUT);
pinMode(ANALOG_GREEN_PIN, OUTPUT);
}
int ledCount = MAX_LEDS;
if (ANALOG_MODE == ANALOG_MODE_LAST_LED) {
ledCount--;
}
#if MAX_LEDS > 1 || ANALOG_OUTPUT_ENABLED == false
FastLED.addLeds<LED_TYPE, LED_PINS, COLOR_ORDER>(leds, ledCount);
#endif
// color adjustments
FastLED.setBrightness ( BRIGHTNESS );
FastLED.setTemperature( COLOR_TEMPERATURE );
FastLED.setCorrection ( COLOR_CORRECTION );
FastLED.setDither ( DITHER_MODE );
// initial RGB flash
#if INITIAL_LED_TEST_ENABLED == true
for (int v=0;v<INITIAL_LED_TEST_BRIGHTNESS;v++)
{
showColor(CRGB(v,v,v));
delay(INITIAL_LED_TEST_TIME_MS/2/INITIAL_LED_TEST_BRIGHTNESS);
}
for (int v=0;v<INITIAL_LED_TEST_BRIGHTNESS;v++)
{
showColor(CRGB(v,v,v));
delay(INITIAL_LED_TEST_TIME_MS/2/INITIAL_LED_TEST_BRIGHTNESS);
}
#endif
showColor(CRGB(0, 0, 0));
Serial.print("Ada\n"); // Send "Magic Word" string to host
boolean transmissionSuccess;
unsigned long sum_r, sum_g, sum_b;
// loop() is avoided as even that small bit of function overhead
// has a measurable impact on this code's overall throughput.
for(;;) {
// wait for first byte of Magic Word
for (i = 0; i < sizeof prefix; ++i) {
// If next byte is not in Magic Word, the start over
if (!checkIncommingData() || prefix[i] != Serial.read()) {
i = 0;
}
}
// Hi, Lo, Checksum
if (!checkIncommingData()) continue;
hi = Serial.read();
if (!checkIncommingData()) continue;
lo = Serial.read();
if (!checkIncommingData()) continue;
chk = Serial.read();
// if checksum does not match go back to wait
if (chk != (hi ^ lo ^ 0x55)) continue;
memset(leds, 0, MAX_LEDS * sizeof(struct CRGB));
transmissionSuccess = true;
sum_r = 0;
sum_g = 0;
sum_b = 0;
int num_leds = min ( MAX_LEDS, (hi<<8) + lo + 1 );
// read the transmission data and set LED values
for (int idx = 0; idx < num_leds; idx++) {
byte r, g, b;
if (!checkIncommingData()) {
transmissionSuccess = false;
break;
}
r = Serial.read();
if (!checkIncommingData()) {
transmissionSuccess = false;
break;
}
g = Serial.read();
if (!checkIncommingData()) {
transmissionSuccess = false;
break;
}
b = Serial.read();
leds[idx].r = r;
leds[idx].g = g;
leds[idx].b = b;
#if ANALOG_OUTPUT_ENABLED == true && ANALOG_MODE == ANALOG_MODE_AVERAGE
sum_r += r;
sum_g += g;
sum_b += b;
#endif
}
// shows new values
if (transmissionSuccess) {
endTime = millis() + OFF_TIMEOUT;
#if MAX_LEDS > 1 || ANALOG_OUTPUT_ENABLED == false
FastLED.show();
#endif
#if ANALOG_OUTPUT_ENABLED == true
#if ANALOG_MODE == ANALOG_MODE_LAST_LED
showAnalogRGB(leds[MAX_LEDS-1]);
#else
showAnalogRGB(CRGB(sum_r/MAX_LEDS, sum_g/MAX_LEDS, sum_b/MAX_LEDS));
#endif
#endif
}
}
} // end of setup
void loop() {
// Not used. See note in setup() function.
}
Alles anzeigen
The Pi's Hyperion config is:
// Automatically generated configuration file for Hyperion ambilight daemon
// Notice: All values are explained with comments at our wiki: wiki.hyperion-project.org (config area)
// Generated by: HyperCon (The Hyperion deamon configuration file builder)
// Created with HyperCon V1.03.3 (22.10.2017)
{
// DEVICE CONFIGURATION
"device" :
{
"name" : "RasPlex_Config",
"type" : "ws281x",
"leds" : 50,
"output" : "/dev/ttyACM0",
"rate" : 115200,
"colorOrder" : "rgb"
},
// COLOR CALIBRATION CONFIG
"color" :
{
"channelAdjustment" :
[
{
"id" : "default",
"leds" : "*",
"pureRed" :
{
"redChannel" : 255,
"greenChannel" : 0,
"blueChannel" : 0
},
"pureGreen" :
{
"redChannel" : 0,
"greenChannel" : 255,
"blueChannel" : 0
},
"pureBlue" :
{
"redChannel" : 0,
"greenChannel" : 0,
"blueChannel" : 255
}
}
],
"temperature" :
[
{
"id" : "default",
"leds" : "*",
"correctionValues" :
{
"red" : 255,
"green" : 255,
"blue" : 255
}
}
],
"transform" :
[
{
"id" : "default",
"leds" : "*",
"hsl" :
{
"saturationGain" : 1.0000,
"luminanceGain" : 1.0000,
"luminanceMinimum" : 0.0000
},
"red" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
},
"green" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
},
"blue" :
{
"threshold" : 0.0000,
"gamma" : 2.5000
}
}
],
// SMOOTHING CONFIG
"smoothing" :
{
"type" : "linear",
"time_ms" : 200,
"updateFrequency" : 20.0000,
"updateDelay" : 0
}
},
// NO V4L2 GRABBER CONFIG
// FRAME GRABBER CONFIG
"framegrabber" :
{
"width" : 64,
"height" : 64,
"frequency_Hz" : 10.0,
"priority" : 890
},
// BLACKBORDER CONFIG
"blackborderdetector" :
{
"enable" : true,
"threshold" : 0.01,
"unknownFrameCnt" : 600,
"borderFrameCnt" : 50,
"maxInconsistentCnt" : 10,
"blurRemoveCnt" : 1,
"mode" : "classic"
},
// KODI CHECK CONFIG
"xbmcVideoChecker" :
{
"xbmcAddress" : "127.0.0.1",
"xbmcTcpPort" : 9090,
"grabVideo" : true,
"grabPictures" : true,
"grabAudio" : true,
"grabMenu" : true,
"grabPause" : true,
"grabScreensaver" : true,
"enable3DDetection" : true
},
// BOOTEFFECT CONFIG
"bootsequence" :
{
"color" : [66,244,188],
"effect" : "Rainbow swirl",
"duration_ms" : 3000,
"priority" : 700
},
// JSON SERVER CONFIG
"jsonServer" :
{
"port" : 19444
},
// PROTO SERVER CONFIG
"protoServer" :
{
"port" : 19445
},
// JSON/PROTO FORWARD CONFIG
"forwarder" :
{
"json" : ["127.0.0.1:19446"],
"proto" : ["127.0.0.1:19447"]
},
// EFFECT PATH
"effects" :
{
"paths" :
[
"/storage/hyperion/effects",
"/usr/share/hyperion/effects",
"/opt/hyperion/effects"
]
},
// NO BOBLIGHT SERVER CONFIG
// LED CONFIGURATION
"leds" :
[
{
"index" : 0,
"hscan" : { "minimum" : 0.8107, "maximum" : 0.8560 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 1,
"hscan" : { "minimum" : 0.1440, "maximum" : 0.1893 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 2,
"hscan" : { "minimum" : 0.0964, "maximum" : 0.1417 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 3,
"hscan" : { "minimum" : 0.0488, "maximum" : 0.0940 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 4,
"hscan" : { "minimum" : 0.0012, "maximum" : 0.0464 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 5,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 6,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.9025, "maximum" : 0.9975 }
},
{
"index" : 7,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.8025, "maximum" : 0.8975 }
},
{
"index" : 8,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.7025, "maximum" : 0.7975 }
},
{
"index" : 9,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.6025, "maximum" : 0.6975 }
},
{
"index" : 10,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.5025, "maximum" : 0.5975 }
},
{
"index" : 11,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.4025, "maximum" : 0.4975 }
},
{
"index" : 12,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.3025, "maximum" : 0.3975 }
},
{
"index" : 13,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.2025, "maximum" : 0.2975 }
},
{
"index" : 14,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.1025, "maximum" : 0.1975 }
},
{
"index" : 15,
"hscan" : { "minimum" : 0.0000, "maximum" : 0.0500 },
"vscan" : { "minimum" : 0.0025, "maximum" : 0.0975 }
},
{
"index" : 16,
"hscan" : { "minimum" : 0.0012, "maximum" : 0.0464 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 17,
"hscan" : { "minimum" : 0.0488, "maximum" : 0.0940 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 18,
"hscan" : { "minimum" : 0.0964, "maximum" : 0.1417 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 19,
"hscan" : { "minimum" : 0.1440, "maximum" : 0.1893 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 20,
"hscan" : { "minimum" : 0.1917, "maximum" : 0.2369 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 21,
"hscan" : { "minimum" : 0.2393, "maximum" : 0.2845 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 22,
"hscan" : { "minimum" : 0.2869, "maximum" : 0.3321 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 23,
"hscan" : { "minimum" : 0.3345, "maximum" : 0.3798 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 24,
"hscan" : { "minimum" : 0.3821, "maximum" : 0.4274 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 25,
"hscan" : { "minimum" : 0.4298, "maximum" : 0.4750 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 26,
"hscan" : { "minimum" : 0.4774, "maximum" : 0.5226 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 27,
"hscan" : { "minimum" : 0.5250, "maximum" : 0.5702 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 28,
"hscan" : { "minimum" : 0.5726, "maximum" : 0.6179 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 29,
"hscan" : { "minimum" : 0.6202, "maximum" : 0.6655 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 30,
"hscan" : { "minimum" : 0.6679, "maximum" : 0.7131 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 31,
"hscan" : { "minimum" : 0.7155, "maximum" : 0.7607 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 32,
"hscan" : { "minimum" : 0.7631, "maximum" : 0.8083 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 33,
"hscan" : { "minimum" : 0.8107, "maximum" : 0.8560 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 34,
"hscan" : { "minimum" : 0.8583, "maximum" : 0.9036 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 35,
"hscan" : { "minimum" : 0.9060, "maximum" : 0.9512 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 36,
"hscan" : { "minimum" : 0.9536, "maximum" : 0.9988 },
"vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
},
{
"index" : 37,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.0025, "maximum" : 0.0975 }
},
{
"index" : 38,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.1025, "maximum" : 0.1975 }
},
{
"index" : 39,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.2025, "maximum" : 0.2975 }
},
{
"index" : 40,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.3025, "maximum" : 0.3975 }
},
{
"index" : 41,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.4025, "maximum" : 0.4975 }
},
{
"index" : 42,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.5025, "maximum" : 0.5975 }
},
{
"index" : 43,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.6025, "maximum" : 0.6975 }
},
{
"index" : 44,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.7025, "maximum" : 0.7975 }
},
{
"index" : 45,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.8025, "maximum" : 0.8975 }
},
{
"index" : 46,
"hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
"vscan" : { "minimum" : 0.9025, "maximum" : 0.9975 }
},
{
"index" : 47,
"hscan" : { "minimum" : 0.9536, "maximum" : 0.9988 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 48,
"hscan" : { "minimum" : 0.9060, "maximum" : 0.9512 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
},
{
"index" : 49,
"hscan" : { "minimum" : 0.8583, "maximum" : 0.9036 },
"vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
}
],
"endOfJson" : "endOfJson"
}
Alles anzeigen
I've attempted adjusting serial baud rate on both devices (always matching) using 100000, 115200 and 5000000 with no success.
Hyperion log shows activity and what appears to be normally working software. I did start and stop Hyperion several times as indicated in the log to ensure there were no errors:
SSH Traffic:
ssh connected
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (366)
ssh in: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Build Time: Jun 3 2017 02:06:37
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 49]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 49]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 49]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "leds" : 50,
ssh in: "name" : "RasPlex_Config",
ssh in: "output" : "/dev/ttyACM0",
ssh in: "rate" : 115200,
ssh in: "type" : "ws281x"
ssh in: }
ssh in: whiteAlgorithm ::
ssh in: HYPERION INFO: Json forward to 127.0.0.1:19446
ssh in: HYPERION INFO: Proto forward to 127.0.0.1:19447
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Rainbow swirl' EFFECTENGINE INFO: run effect Rainbow swirl on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: started
ssh in: INFO: Kodi checker created and started
ssh in: INFO: Json server created and started on port 19444
ssh in: PROTOCONNECTION INFO: Connecting to Hyperion: 127.0.0.1:19447
ssh in: INFO: Proto server created and started on port 19445
ssh in: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: INFO: Frame grabber created and started
ssh in: KODICHECK ERROR: Kodi Connection error (0)
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=4 vert.size=3
ssh in: EFFECTENGINE INFO: effect finished
ssh in: KODICHECK ERROR: Kodi Connection error (0)
ssh in: KODICHECK ERROR: Kodi Connection error (0)
ssh in: KODICHECK ERROR: Kodi Connection error (0)
ssh in: KODICHECK INFO: Kodi Connected
ssh in: KODICHECK INFO: switching to MENU mode
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=4 vert.size=4
ssh in: INFO: Application closed with code 0
ssh in: KODICHECK INFO: Kodi Disconnected
ssh in: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Shutdown WS281x PWM and DMA channel
ssh out: /storage/.config/autostart.sh > /dev/null 2>&1 &
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (843)
ssh in: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Build Time: Jun 3 2017 02:06:37
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 49]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 49]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 49]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "leds" : 50,
ssh in: "name" : "RasPlex_Config",
ssh in: "output" : "/dev/ttyACM0",
ssh in: "rate" : 115200,
ssh in: "type" : "ws281x"
ssh in: }
ssh in: whiteAlgorithm ::
ssh in: HYPERION INFO: Json forward to 127.0.0.1:19446
ssh in: HYPERION INFO: Proto forward to 127.0.0.1:19447
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Rainbow swirl' EFFECTENGINE INFO: run effect Rainbow swirl on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: started
ssh in: INFO: Kodi checker created and started
ssh in: INFO: Json server created and started on port 19444
ssh in: PROTOCONNECTION INFO: Connecting to Hyperion: 127.0.0.1:19447
ssh in: INFO: Proto server created and started on port 19445
ssh in: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: INFO: Frame grabber created and started
ssh in: KODICHECK INFO: Kodi Connected
ssh in: KODICHECK INFO: switching to MENU mode
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=4 vert.size=4
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (843)
ssh in: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Build Time: Jun 3 2017 02:06:37
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 49]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 49]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 49]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "leds" : 50,
ssh in: "name" : "RasPlex_Config",
ssh in: "output" : "/dev/ttyACM0",
ssh in: "rate" : 115200,
ssh in: "type" : "ws281x"
ssh in: }
ssh in: whiteAlgorithm ::
ssh in: HYPERION INFO: Json forward to 127.0.0.1:19446
ssh in: HYPERION INFO: Proto forward to 127.0.0.1:19447
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Rainbow swirl' EFFECTENGINE INFO: run effect Rainbow swirl on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: started
ssh in: INFO: Kodi checker created and started
ssh in: INFO: Json server created and started on port 19444
ssh in: PROTOCONNECTION INFO: Connecting to Hyperion: 127.0.0.1:19447
ssh in: INFO: Proto server created and started on port 19445
ssh in: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: INFO: Frame grabber created and started
ssh in: KODICHECK INFO: Kodi Connected
ssh in: KODICHECK INFO: switching to MENU mode
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=4 vert.size=4
ssh in: EFFECTENGINE INFO: effect finished
ssh in: JSONSERVER INFO: New connection
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (843)
ssh in: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Build Time: Jun 3 2017 02:06:37
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 49]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 49]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 49]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "leds" : 50,
ssh in: "name" : "RasPlex_Config",
ssh in: "output" : "/dev/ttyACM0",
ssh in: "rate" : 115200,
ssh in: "type" : "ws281x"
ssh in: }
ssh in: whiteAlgorithm ::
ssh in: HYPERION INFO: Json forward to 127.0.0.1:19446
ssh in: HYPERION INFO: Proto forward to 127.0.0.1:19447
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Rainbow swirl' EFFECTENGINE INFO: run effect Rainbow swirl on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: started
ssh in: INFO: Kodi checker created and started
ssh in: INFO: Json server created and started on port 19444
ssh in: PROTOCONNECTION INFO: Connecting to Hyperion: 127.0.0.1:19447
ssh in: INFO: Proto server created and started on port 19445
ssh in: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: INFO: Frame grabber created and started
ssh in: KODICHECK INFO: Kodi Connected
ssh in: KODICHECK INFO: switching to MENU mode
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=4 vert.size=4
ssh in: EFFECTENGINE INFO: effect finished
ssh in: JSONSERVER INFO: New connection
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: EFFECTENGINE INFO: run effect Knight rider on channel 50
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (843)
ssh in: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Build Time: Jun 3 2017 02:06:37
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 49]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 49]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 49]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "leds" : 50,
ssh in: "name" : "RasPlex_Config",
ssh in: "output" : "/dev/ttyACM0",
ssh in: "rate" : 115200,
ssh in: "type" : "ws281x"
ssh in: }
ssh in: whiteAlgorithm ::
ssh in: HYPERION INFO: Json forward to 127.0.0.1:19446
ssh in: HYPERION INFO: Proto forward to 127.0.0.1:19447
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Rainbow swirl' EFFECTENGINE INFO: run effect Rainbow swirl on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: started
ssh in: INFO: Kodi checker created and started
ssh in: INFO: Json server created and started on port 19444
ssh in: PROTOCONNECTION INFO: Connecting to Hyperion: 127.0.0.1:19447
ssh in: INFO: Proto server created and started on port 19445
ssh in: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: INFO: Frame grabber created and started
ssh in: KODICHECK INFO: Kodi Connected
ssh in: KODICHECK INFO: switching to MENU mode
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=4 vert.size=4
ssh in: EFFECTENGINE INFO: effect finished
ssh in: JSONSERVER INFO: New connection
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: EFFECTENGINE INFO: run effect Knight rider on channel 50
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: JSONSERVER INFO: Connection closed
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (843)
ssh in: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Build Time: Jun 3 2017 02:06:37
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 49]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 49]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 49]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "leds" : 50,
ssh in: "name" : "RasPlex_Config",
ssh in: "output" : "/dev/ttyACM0",
ssh in: "rate" : 115200,
ssh in: "type" : "ws281x"
ssh in: }
ssh in: whiteAlgorithm ::
ssh in: HYPERION INFO: Json forward to 127.0.0.1:19446
ssh in: HYPERION INFO: Proto forward to 127.0.0.1:19447
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Rainbow swirl' EFFECTENGINE INFO: run effect Rainbow swirl on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: started
ssh in: INFO: Kodi checker created and started
ssh in: INFO: Json server created and started on port 19444
ssh in: PROTOCONNECTION INFO: Connecting to Hyperion: 127.0.0.1:19447
ssh in: INFO: Proto server created and started on port 19445
ssh in: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: INFO: Frame grabber created and started
ssh in: KODICHECK INFO: Kodi Connected
ssh in: KODICHECK INFO: switching to MENU mode
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=4 vert.size=4
ssh in: EFFECTENGINE INFO: effect finished
ssh in: JSONSERVER INFO: New connection
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: EFFECTENGINE INFO: run effect Knight rider on channel 50
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: JSONSERVER INFO: Connection closed
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=4
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (843)
ssh in: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Build Time: Jun 3 2017 02:06:37
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 49]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 49]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 49]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "leds" : 50,
ssh in: "name" : "RasPlex_Config",
ssh in: "output" : "/dev/ttyACM0",
ssh in: "rate" : 115200,
ssh in: "type" : "ws281x"
ssh in: }
ssh in: whiteAlgorithm ::
ssh in: HYPERION INFO: Json forward to 127.0.0.1:19446
ssh in: HYPERION INFO: Proto forward to 127.0.0.1:19447
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Rainbow swirl' EFFECTENGINE INFO: run effect Rainbow swirl on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: started
ssh in: INFO: Kodi checker created and started
ssh in: INFO: Json server created and started on port 19444
ssh in: PROTOCONNECTION INFO: Connecting to Hyperion: 127.0.0.1:19447
ssh in: INFO: Proto server created and started on port 19445
ssh in: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: INFO: Frame grabber created and started
ssh in: KODICHECK INFO: Kodi Connected
ssh in: KODICHECK INFO: switching to MENU mode
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=4 vert.size=4
ssh in: EFFECTENGINE INFO: effect finished
ssh in: JSONSERVER INFO: New connection
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: EFFECTENGINE INFO: run effect Knight rider on channel 50
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: JSONSERVER INFO: Connection closed
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=4
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (843)
ssh in: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Build Time: Jun 3 2017 02:06:37
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 49]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 49]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 49]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "leds" : 50,
ssh in: "name" : "RasPlex_Config",
ssh in: "output" : "/dev/ttyACM0",
ssh in: "rate" : 115200,
ssh in: "type" : "ws281x"
ssh in: }
ssh in: whiteAlgorithm ::
ssh in: HYPERION INFO: Json forward to 127.0.0.1:19446
ssh in: HYPERION INFO: Proto forward to 127.0.0.1:19447
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Rainbow swirl' EFFECTENGINE INFO: run effect Rainbow swirl on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: started
ssh in: INFO: Kodi checker created and started
ssh in: INFO: Json server created and started on port 19444
ssh in: PROTOCONNECTION INFO: Connecting to Hyperion: 127.0.0.1:19447
ssh in: INFO: Proto server created and started on port 19445
ssh in: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: INFO: Frame grabber created and started
ssh in: KODICHECK INFO: Kodi Connected
ssh in: KODICHECK INFO: switching to MENU mode
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=4 vert.size=4
ssh in: EFFECTENGINE INFO: effect finished
ssh in: JSONSERVER INFO: New connection
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: EFFECTENGINE INFO: run effect Knight rider on channel 50
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: JSONSERVER INFO: Connection closed
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=4
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (843)
ssh in: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Build Time: Jun 3 2017 02:06:37
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 49]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 49]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 49]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "leds" : 50,
ssh in: "name" : "RasPlex_Config",
ssh in: "output" : "/dev/ttyACM0",
ssh in: "rate" : 115200,
ssh in: "type" : "ws281x"
ssh in: }
ssh in: whiteAlgorithm ::
ssh in: HYPERION INFO: Json forward to 127.0.0.1:19446
ssh in: HYPERION INFO: Proto forward to 127.0.0.1:19447
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Rainbow swirl' EFFECTENGINE INFO: run effect Rainbow swirl on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: started
ssh in: INFO: Kodi checker created and started
ssh in: INFO: Json server created and started on port 19444
ssh in: PROTOCONNECTION INFO: Connecting to Hyperion: 127.0.0.1:19447
ssh in: INFO: Proto server created and started on port 19445
ssh in: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: INFO: Frame grabber created and started
ssh in: KODICHECK INFO: Kodi Connected
ssh in: KODICHECK INFO: switching to MENU mode
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=4 vert.size=4
ssh in: EFFECTENGINE INFO: effect finished
ssh in: JSONSERVER INFO: New connection
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: EFFECTENGINE INFO: run effect Knight rider on channel 50
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: JSONSERVER INFO: Connection closed
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=4
ssh in: KODICHECK INFO: switching to VIDEO mode
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (843)
ssh in: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Build Time: Jun 3 2017 02:06:37
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 49]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 49]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 49]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "leds" : 50,
ssh in: "name" : "RasPlex_Config",
ssh in: "output" : "/dev/ttyACM0",
ssh in: "rate" : 115200,
ssh in: "type" : "ws281x"
ssh in: }
ssh in: whiteAlgorithm ::
ssh in: HYPERION INFO: Json forward to 127.0.0.1:19446
ssh in: HYPERION INFO: Proto forward to 127.0.0.1:19447
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Rainbow swirl' EFFECTENGINE INFO: run effect Rainbow swirl on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: started
ssh in: INFO: Kodi checker created and started
ssh in: INFO: Json server created and started on port 19444
ssh in: PROTOCONNECTION INFO: Connecting to Hyperion: 127.0.0.1:19447
ssh in: INFO: Proto server created and started on port 19445
ssh in: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: INFO: Frame grabber created and started
ssh in: KODICHECK INFO: Kodi Connected
ssh in: KODICHECK INFO: switching to MENU mode
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=4 vert.size=4
ssh in: EFFECTENGINE INFO: effect finished
ssh in: JSONSERVER INFO: New connection
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: EFFECTENGINE INFO: run effect Knight rider on channel 50
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: JSONSERVER INFO: Connection closed
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=4
ssh in: KODICHECK INFO: switching to VIDEO mode
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: KODICHECK INFO: switching to MENU mode
ssh out: killall hyperiond 2>/dev/null
ssh out: cat /storage/logfiles/hyperion.log
ssh in: Hyperion Ambilight Deamon (843)
ssh in: Version : V1.03.3 (brindosch-2fbbcff/2f01dfa-1495880388
ssh in: Build Time: Jun 3 2017 02:06:37
ssh in: INFO: Selected configuration file: /storage/.config/hyperion.config.json
ssh in: HYPERION INFO: ColorTransform 'default' => [0; 49]
ssh in: HYPERION INFO: ColorCorrection 'default' => [0; 49]
ssh in: HYPERION INFO: ColorAdjustment 'default' => [0; 49]
ssh in: LEDDEVICE INFO: configuration:
ssh in: {
ssh in: "colorOrder" : "rgb",
ssh in: "leds" : 50,
ssh in: "name" : "RasPlex_Config",
ssh in: "output" : "/dev/ttyACM0",
ssh in: "rate" : 115200,
ssh in: "type" : "ws281x"
ssh in: }
ssh in: whiteAlgorithm ::
ssh in: HYPERION INFO: Json forward to 127.0.0.1:19446
ssh in: HYPERION INFO: Proto forward to 127.0.0.1:19447
ssh in: INFO: Creating linear smoothing
ssh in: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
ssh in: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: INFO: Hyperion started and initialised
ssh in: INFO: Boot sequence 'Rainbow swirl' EFFECTENGINE INFO: run effect Rainbow swirl on channel 0
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: started
ssh in: INFO: Kodi checker created and started
ssh in: INFO: Json server created and started on port 19444
ssh in: PROTOCONNECTION INFO: Connecting to Hyperion: 127.0.0.1:19447
ssh in: INFO: Proto server created and started on port 19445
ssh in: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: INFO: Frame grabber created and started
ssh in: KODICHECK INFO: Kodi Connected
ssh in: KODICHECK INFO: switching to MENU mode
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=4 vert.size=4
ssh in: EFFECTENGINE INFO: effect finished
ssh in: JSONSERVER INFO: New connection
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: EFFECTENGINE INFO: run effect Knight rider on channel 50
ssh in: BLACKBORDER INFO: threshold set to 0.01 (3)
ssh in: BLACKBORDER INFO: mode:classic
ssh in: JSONSERVER INFO: Connection closed
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=4
ssh in: KODICHECK INFO: switching to VIDEO mode
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: KODICHECK INFO: switching to MENU mode
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=4
ssh in: BORDER SWITCH REQUIRED!!
ssh in: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: INFO: Application closed with code 0
ssh in: KODICHECK INFO: Kodi Disconnected
ssh in: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Shutdown WS281x PWM and DMA channel
Alles anzeigen
I tested the communication between the Pi and Arduino by installing Sketch on the Pi and successfully uploading to the Arduino so it seems they can at least communicate. I've also swapped out USB cables and even tried a different Arduino unit to no avail which makes me think it may be something on the Pi, configuration or otherwise.
Hopefully I've provided enough details and in the correct format. I'm thinking I've overlooked something simple. Thoughts?