Wemos D1 Mini und die WS2801

Cupra-Bo · 1. Dezember 2018

Servus jungs,, hab hier noch 50 WS2801 liegen die ich gerne mit Hyperion verwenden würde !

Hab auch noch 1-2 Wemos D1 mini hier liegen leider will das nicht so !

Ich hab in der Config

Code

#define CONFIG_LED_SPI_CHIPSET WS2801 //Comment out for clockless
//#define CONFIG_LED_CLOCKLESS_CHIPSET WS2812B //Comment in for clockless
//#define FASTLED_ALLOW_INTERRUPTS 0 //Comment in if clockless stripe (ex. WS2812B) is flickering
//#define CONFIG_LED_PWM 1 //Comment in if PWM Stripe


#define CONFIG_LED_DATAPIN  D1 //Comment out for PWM
#define CONFIG_LED_CLOCKPIN D2 //Comment out for clockless / PWM
//#define CONFIG_LED_PWM_RED D1 //Comment in for PWM
//#define CONFIG_LED_PWM_GREEN D2 //Comment in for PWM
//#define CONFIG_LED_PWM_BLUE D3 //Comment in for PWM


//Pin order, see FastLED doc. NodeMCU should work with FASTLED_ESP8266_RAW_PIN_ORDER
//#define FASTLED_ESP8266_RAW_PIN_ORDER
//#define FASTLED_ESP8266_NODEMCU_PIN_ORDER
#define FASTLED_ESP8266_D1_PIN_ORDER

Alles anzeigen

Wo ist mein Fehler ?

Gruß

Akriss · 1. Dezember 2018

Try this:

Code

#define CONFIG_LED_SPI_CHIPSET WS2801 //Comment out for clockless
//#define CONFIG_LED_CLOCKLESS_CHIPSET WS2812B //Comment in for clockless
//#define FASTLED_ALLOW_INTERRUPTS 0 //Comment in if clockless stripe (ex. WS2812B) is flickering
//#define CONFIG_LED_PWM 1 //Comment in if PWM Stripe


#define CONFIG_LED_DATAPIN  D7 //Comment out for PWM  <<
#define CONFIG_LED_CLOCKPIN D5 //Comment out for clockless / PWM   <<


//#define CONFIG_LED_PWM_RED D1 //Comment in for PWM
//#define CONFIG_LED_PWM_GREEN D2 //Comment in for PWM
//#define CONFIG_LED_PWM_BLUE D3 //Comment in for PWM


//Pin order, see FastLED doc. NodeMCU should work with FASTLED_ESP8266_RAW_PIN_ORDER


#define FASTLED_ESP8266_RAW_PIN_ORDER  //<<<


//#define FASTLED_ESP8266_NODEMCU_PIN_ORDER
//#define FASTLED_ESP8266_D1_PIN_ORDER

Alles anzeigen

On the Wemos's I use those settings for WS2801 and APA102 as well. just need to change the led type.

Hope it is of help.

Cupra-Bo · 1. Dezember 2018

Thanks

yellow D1
Green D2

or D5 and D7 on the board

EDIT: Dont work on D1 and D2

Dont Work on D5 and D7

Akriss · 2. Dezember 2018

+ the above sketch config. works for me.
Might need a level shifter/buffer for long strings.

Cupra-Bo · 2. Dezember 2018

I do not have a stripe I have normal LEDs 50 pieces

With an Arduino Uno go the LED's -.-

Cupra-Bo · 2. Dezember 2018

Zitat von Akriss

+ the above sketch config. works for me.
Might need a level shifter/buffer for long strings.

Can i test your complete Sketch?

Akriss · 2. Dezember 2018

Zitat von Cupra-Bo

Can i test your complete Sketch?

Sorry, no. the sketch has unique settings for my network.

However, if you download the original from ( https://github.com/SciLor/Hyperion_LED-Controller ). And add the changes I posted earlier you well be good to go.

Cupra-Bo · 2. Dezember 2018

Unfortunately, I'm not now ordered a shifter

Jetzt mitmachen!