Thank you in advance for such an active and helpful forum. I have gone through the tutorial below using a RPI3 and believe I have followed it to a T; however, I am unable to get any lights lit.
https://hyperion-project.org/t…mbilight-no-soldering.77/
I have tried the strip on its own so I know the LEDs will light, but they do not seem to respond to any hyperion commands. I have attached the ssh log but in reading through it I did not see anything that seemed to be working incorrectly. Does anyone have any suggestions on what I should try next? I have attempted to search and read through those with similar problems but to no avail.
Code
SSH Traffic:
ssh connected
ssh disconnected
ssh connected
ssh out: sudo journalctl -u hyperion.service 2>/dev/null
ssh in: -- Logs begin at Mon 2017-01-09 22:30:01 EST, end at Mon 2017-01-09 23:00:38 EST. --
ssh in: Jan 09 22:30:02 osmc systemd[1]: Starting Hyperion Systemd service...
ssh in: Jan 09 22:30:02 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Jan 09 22:30:04 osmc hyperiond[303]: Hyperion Ambilight Deamon (303)
ssh in: Jan 09 22:30:04 osmc hyperiond[303]: Version : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
ssh in: Jan 09 22:30:04 osmc hyperiond[303]: Build Time: Jul 25 2016 06:54:40
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: HYPERION INFO: ColorTransform 'default' => [0; 93]
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: HYPERION INFO: ColorCorrection 'default' => [0; 93]
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: HYPERION INFO: ColorAdjustment 'default' => [0; 93]
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: LEDDEVICE INFO: configuration:
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: {
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: "colorOrder" : "rgb",
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: "name" : "MyHyperionConfig",
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: "output" : "/dev/spidev0.0",
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: "rate" : 1000000,
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: "type" : "apa102"
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: }
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: INFO: Creating linear smoothing
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: INFO: Hyperion started and initialised
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: BLACKBORDER INFO: mode:default
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: started
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: INFO: Json server created and started on port 19444
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: INFO: Proto server created and started on port 19445
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: BLACKBORDER INFO: mode:default
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: INFO: Frame grabber created and started
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: BORDER SWITCH REQUIRED!!
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Jan 09 22:30:09 osmc hyperiond[303]: EFFECTENGINE INFO: effect finished
sftp Send Hyperion Config - Sourcepath: D:/-=PROGRAMS=-/RASPBERRY PI FILES, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo journalctl -u hyperion.service 2>/dev/null
ssh in: -- Logs begin at Mon 2017-01-09 22:30:01 EST, end at Mon 2017-01-09 23:01:03 EST. --
ssh in: Jan 09 22:30:02 osmc systemd[1]: Starting Hyperion Systemd service...
ssh in: Jan 09 22:30:02 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Jan 09 22:30:04 osmc hyperiond[303]: Hyperion Ambilight Deamon (303)
ssh in: Jan 09 22:30:04 osmc hyperiond[303]: Version : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
ssh in: Jan 09 22:30:04 osmc hyperiond[303]: Build Time: Jul 25 2016 06:54:40
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: HYPERION INFO: ColorTransform 'default' => [0; 93]
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: HYPERION INFO: ColorCorrection 'default' => [0; 93]
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: HYPERION INFO: ColorAdjustment 'default' => [0; 93]
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: LEDDEVICE INFO: configuration:
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: {
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: "colorOrder" : "rgb",
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: "name" : "MyHyperionConfig",
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: "output" : "/dev/spidev0.0",
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: "rate" : 1000000,
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: "type" : "apa102"
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: }
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: INFO: Creating linear smoothing
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Jan 09 22:30:05 osmc hyperiond[303]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: INFO: Hyperion started and initialised
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: BLACKBORDER INFO: mode:default
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: started
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: INFO: Json server created and started on port 19444
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: INFO: Proto server created and started on port 19445
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: DISPMANXGRABBER INFO: Display opened with resolution: 1920x1080
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: BLACKBORDER INFO: mode:default
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: INFO: Frame grabber created and started
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: BORDER SWITCH REQUIRED!!
ssh in: Jan 09 22:30:06 osmc hyperiond[303]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Jan 09 22:30:09 osmc hyperiond[303]: EFFECTENGINE INFO: effect finished
ssh in: Jan 09 23:00:57 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Jan 09 23:01:02 osmc systemd[1]: Stopping Hyperion Systemd service...
ssh in: Jan 09 23:01:02 osmc hyperiond[303]: INFO: Application closed with code 0
ssh in: Jan 09 23:01:02 osmc hyperiond[303]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Jan 09 23:01:02 osmc systemd[1]: Stopped Hyperion Systemd service.
Alles anzeigen