Beiträge von musicmagic

musicmagic · 9. Juli 2018

I solved the problem.
After changing virtually every single component of the setup I found a faulty stripe-part (the first one).
I replaced it and there was the rainbow.

musicmagic · 2. Juli 2018

and another log from today. I added the solution-attempt from https://hyperion-project.org/t…perion-not-starting.2719/ to my config and got the log afterwards.

Code

SSH Traffic:
ssh connected
ssh out:     sudo journalctl -u hyperion.service 2>/dev/null
ssh in:     -- Logs begin at Thu 2016-11-03 18:16:43 CET, end at Mon 2018-07-02 10:54:33 CEST. --
ssh in:     Jul 02 10:53:16 Ambilight systemd[1]: Started Hyperion Systemd service.
ssh in:     Jul 02 10:53:18 Ambilight hyperiond[227]: Hyperion Ambilight Deamon (227)
ssh in:     Jul 02 10:53:18 Ambilight hyperiond[227]:         Version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in:     Jul 02 10:53:18 Ambilight hyperiond[227]:         Build Time: Apr  5 2018 01:57:25
ssh in:     Jul 02 10:53:18 Ambilight hyperiond[227]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in:     Jul 02 10:53:19 Ambilight hyperiond[227]: HYPERION INFO: ColorTransform 'default' => [0; 95]
ssh in:     Jul 02 10:53:19 Ambilight hyperiond[227]: HYPERION INFO: ColorCorrection 'default' => [0; 95]
ssh in:     Jul 02 10:53:19 Ambilight hyperiond[227]: HYPERION INFO: ColorAdjustment 'default' => [0; 95]
ssh in:     Jul 02 10:53:19 Ambilight hyperiond[227]: LEDDEVICE INFO: configuration:
ssh in:     Jul 02 10:53:19 Ambilight hyperiond[227]: {
ssh in:     Jul 02 10:53:19 Ambilight hyperiond[227]:         "colorOrder" : "rgb",
ssh in:     Jul 02 10:53:19 Ambilight hyperiond[227]:         "name" : "MyHyperionConfig",
ssh in:     Jul 02 10:53:19 Ambilight hyperiond[227]:         "output" : "/dev/spidev0.0",
ssh in:     Jul 02 10:53:19 Ambilight hyperiond[227]:         "rate" : 1000000,
ssh in:     Jul 02 10:53:19 Ambilight hyperiond[227]:         "type" : "ws2801"
ssh in:     Jul 02 10:53:19 Ambilight hyperiond[227]: }
ssh in:     Jul 02 10:53:19 Ambilight hyperiond[227]: INFO: Creating linear smoothing
ssh in:     Jul 02 10:53:19 Ambilight hyperiond[227]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in:     Jul 02 10:53:19 Ambilight hyperiond[227]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in:     Jul 02 10:53:19 Ambilight hyperiond[227]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in:     Jul 02 10:53:20 Ambilight hyperiond[227]: INFO: Hyperion started and initialised
ssh in:     Jul 02 10:53:20 Ambilight hyperiond[227]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in:     Jul 02 10:53:20 Ambilight hyperiond[227]: BLACKBORDER INFO: threshold set to 0.14 (36)
ssh in:     Jul 02 10:53:20 Ambilight hyperiond[227]: BLACKBORDER INFO: mode:default
ssh in:     Jul 02 10:53:20 Ambilight hyperiond[227]: started
ssh in:     Jul 02 10:53:20 Ambilight hyperiond[227]: INFO: Json server created and started on port 19444
ssh in:     Jul 02 10:53:20 Ambilight hyperiond[227]: INFO: Proto server created and started on port 19445
ssh in:     Jul 02 10:53:20 Ambilight hyperiond[227]: terminate called after throwing an instance of 'std::runtime_error'
ssh in:     Jul 02 10:53:20 Ambilight hyperiond[227]:   what():  V4L2GRABBER ERROR: Cannot identify '/dev/video0' ERROR 2, No such file or directory
ssh in:     Jul 02 10:53:20 Ambilight systemd[1]: hyperion.service: Main process exited, code=killed, status=6/ABRT
ssh in:     Jul 02 10:53:20 Ambilight systemd[1]: hyperion.service: Unit entered failed state.
ssh in:     Jul 02 10:53:20 Ambilight systemd[1]: hyperion.service: Failed with result 'signal'.
ssh in:     Jul 02 10:54:10 Ambilight systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in:     Jul 02 10:54:10 Ambilight systemd[1]: Stopped Hyperion Systemd service.
ssh in:     Jul 02 10:54:10 Ambilight systemd[1]: Started Hyperion Systemd service.
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: Hyperion Ambilight Deamon (414)
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]:         Version   : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]:         Build Time: Apr  5 2018 01:57:25
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: HYPERION INFO: ColorTransform 'default' => [0; 95]
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: HYPERION INFO: ColorCorrection 'default' => [0; 95]
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: HYPERION INFO: ColorAdjustment 'default' => [0; 95]
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: LEDDEVICE INFO: configuration:
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: {
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]:         "colorOrder" : "rgb",
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]:         "name" : "MyHyperionConfig",
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]:         "output" : "/dev/spidev0.0",
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]:         "rate" : 1000000,
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]:         "type" : "ws2801"
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: }
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: INFO: Creating linear smoothing
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: INFO: Hyperion started and initialised
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: BLACKBORDER INFO: threshold set to 0.14 (36)
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: BLACKBORDER INFO: mode:default
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: started
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: INFO: Json server created and started on port 19444
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: INFO: Proto server created and started on port 19445
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: V4L2GRABBER INFO: width=720 height=576
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: V4L2GRABBER INFO: pixel format=YUYV
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: BLACKBORDER INFO: threshold set to 0.14 (36)
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: BLACKBORDER INFO: mode:default
ssh in:     Jul 02 10:54:11 Ambilight hyperiond[414]: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in:     Jul 02 10:54:12 Ambilight hyperiond[414]: V4L2GRABBER INFO: started
ssh in:     Jul 02 10:54:12 Ambilight hyperiond[414]: INFO: V4L2 grabber created and started
ssh in:     Jul 02 10:54:12 Ambilight hyperiond[414]: BORDER SWITCH REQUIRED!!
ssh in:     Jul 02 10:54:12 Ambilight hyperiond[414]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in:     Jul 02 10:54:12 Ambilight hyperiond[414]: V4L2GRABBER INFO: stopped
ssh in:     Jul 02 10:54:15 Ambilight hyperiond[414]: EFFECTENGINE INFO: effect finished
ssh in:     Jul 02 10:54:15 Ambilight hyperiond[414]: V4L2GRABBER INFO: started

Alles anzeigen

Needless to say: I didn't see any swirl.

musicmagic · 2. Juli 2018

There you go.

Code

osmc@Ambilight:~$ sudo service hyperion restart
osmc@Ambilight:~$ sudo service hyperion status
* hyperion.service - Hyperion Systemd service
   Loaded: loaded (/etc/systemd/system/hyperion.service; enabled; vendor preset: enabled)
   Active: activating (auto-restart) (Result: signal) since Sun 2018-07-01 15:07:25 CEST; 2s ago
  Process: 1980 ExecStart=/usr/bin/hyperiond /etc/hyperion/hyperion.config.json (code=killed, signal=ABRT)
Main PID: 1980 (code=killed, signal=ABRT)


Jul 01 15:07:25 Ambilight systemd[1]: hyperion.service: Unit entered failed state.
Jul 01 15:07:25 Ambilight systemd[1]: hyperion.service: Failed with result 'signal'.

Alles anzeigen

musicmagic · 1. Juli 2018

I would like to push the last query. I had a working system (WS2801 stripe, RPI 1) for months, including a working (+calibrated) hyperion config.
After watching this year's Eurovision Song Contest (with my parents in law..) I turned off the system (made pi powerless) for the first time in a while.
Since then the system has not been working. I get the same error logs as user breaked. LEDs are all shining in blue but no rainbow swirl and/or no colors adjustable. I re-installed osmc numerous times (each time following Brindoschs Tutorials), I double-checked the wiring (multimeter indicates sufficient potential between GRND and 5V). I can even grab an image from my grabber, I'm just not able to transfer the signal to the stripe.
I used another pi, same results.
I tried manually adding the dtparam=spi=on to config.txt , only to find that it was already there. I also tried to use the appropriate settings from within OSMC. No luck.

Has anybody got more ideas or can tell me what other logs to paste here that might be helpful?
Cheers.

musicmagic · 4. November 2017

Hi everyone,

I would also be interested in a way to use the awesome media player Vero 4K with the equally awesome Ambient project.
Sam here is a great programmer and he has done a lot for osmc on raspberry and then Vero.

Please help him implement this

Thanks

Beiträge von musicmagic

Hyperion hangs up after few days

Hyperion hangs up after few days

Hyperion hangs up after few days

Hyperion hangs up after few days

Adding support for Vero 4K