Work‘s!
Thanks a lot!
Work‘s!
Thanks a lot!
Hello,
I tried to do an apt-get update on my Raspi Bullseye.
However, apt-get update gives me back:
Get:3 https://apt.releases.hyperion-project.org bullseye InRelease [4,741 B]
Reading package lists... Done
E: Repository 'https://apt.releases.hyperion-project.org bullseye InRelease' changed its 'Label' value from 'apt.hyperion-project.org' to 'releases.hyperion-project.org'
N: Repository 'https://apt.releases.hyperion-project.org bullseye InRelease' changed its 'Suite' value from 'stable' to 'oldstable'
N: This must be accepted explicitly before updates for this repository can be applied. See apt-secure(8) manpage for details.
Not sure how to fix this.
Jan
Hallo Lord Grey,
verhindert man mit -disable LEDDEVICE, dass die LEDs kurz aufblitzen oder wie bei mir eine dauerhaft leuchtet, wenn im Netz eine Spannungspitze kommt (bei mir z.B. durch Anschalten der Stereoanlage).
Gruß
Jan
Danke,
ich wusste nicht, dass man die IP mit angeben muss. Das ist neu!
Gruß
Jan
Hallo,
ich habe meinen Raspi frisch mit einem Raspberry Pi OS Bullseye aufgesetzt.
Hyperion NG 2.0.12 habe ich dabei via apt-get installiert und habe meine Konfiguration von Hyperion NG 2.0.0-alpha.9 (export -> import) übertragen.
Hyperion läuft!
Was leider nicht läuft ist Hyperion-Remote!
Wenn ich z.B. versuche die LEDs schwarz zu schalten mit hyperion-remote --color black kommt folgende Fehlermeldung
hyperion-remote:
Version : 2.0.12 ((HEAD detached at 2.0.12) (GitHub-dc6aa4d/df14958-1637501177))
build time: Nov 21 2021 17:25:12
2022-03-04T21:17:17.562 REMOTE : <ERROR> Unable to connect to host (), port (19444)
Ich komme leider hier nicht weiter. Finde auch Nichts dazu...
Hat jemand ggf. eine Idee, wie ich Hyperion-Remote wieder zum Laufen bekommen?
Thx,
Jan
Ich habe doch noch was gefunden:
https://discourse.coreelec.org…gic-improvements/5476/258
ZitatAfter last update to v. 19.3.109 hyperion-remote gets error when try to connect: REMOTE : Unable to connect to host (), port (19444) In v. 19.3.108 everything works (even after dowgrade from 109 to 108)
Wie kann ich per apt-get install eine spezifische Hyperion Version installieren und welche ist dei angesprochene 19.3.108?
I finally found a workaround to control my hyperion via my TV IR remote: Flirc USB, which can work like a Keyboard. Then I defined some shortcuts via bashrc.
Works!
https://www.instructables.com/…ssistant-on-Raspberry-Pi/
I am running on my Raspi3+ with Raspian Stretch in parallel:
works fine except LIRC which seems not to work with Hyperion and some grabber combinations.
Ja ist schwarz wenn kein HDMI Signal anliegt.
Man kann aber mit
die LEDs schwarz ausschalten. Ist auch besser weil sonst durch eine Stromschwankung mal LEDs versehentlich angehen können. Dies machen sie bei mir jedenfalls.
Mit
geht es dann wieder weiter.
An der Mirabox hängt ein SkyQ Receiver und ein AppleTV3. Von denen kommt aber maximal FullHD, da mein TV nicht mehr kann...
Ich habe auch nur einen Raspi3+. USB3 ist ja abwärtskompatibel. Es kann halt nur sein wenn du zu hohe Auflösungen grabbst, dass das dann nicht mehr geht.
Ich habe eine Auflösung von 720x576 und Verkleinerung 8 eingestellt. Damit tritt qusi keine Last am Rapsi auf.
Hallo,
Ich habe aktuell den
Lief auf anhieb unter Hyperion NG Alpha 0.9.
Gruß
Jan
I already discussed this issue on the German Talk. However, we did not find a solution yet.
TPmodding mentioned that this issue was discussed here in the English thread, however I was not able to find it.
Could anyone please help?
Jan
Next I replaced the splitter and grabber by a MIRA BOX equivalent.
With this setup
IR signals are received.
However,
does not show the keys I am pressing.
Hence,
does not work to control Hyperion.
P.s. as soon as I turn off Hyperion, LIRC works like a charm.
Then I change to a new grabber:
which replaced the D/A Converter an the Fushicai UTV007 grabber.
With this setup I got very good colors etc.
However, LIRC stopped working as soon as I turn on Hyperion (no matter which version 1 or 2ng).
I used
to check if IR signals are receiver. Fail.
The command
does not show the keys I am pressing.
Now I have a new Sky receiver which only has HDMI out. Hence, I had to change my setup by adding
However, I was not very happy with this setup due to color issue which I was not able to calibrate.
LIRC was working with this setup.
Hey volks,
I am not sure if this is a hardware or software issue...so maybe we have to shift this thread to the software forum. But here first of all I my issue
I was running a hyperion setup as follows:
Since end of last year I grabbed the picture directly from the scart source of my Sky receiver.
With this setup I controlled Hyperion on/off, USB Grabber on/off and some of the Hyperion effects with my Sky remote via LIRC.
Hallo,
Da ihr ja viele Grabber etc. testet und getestet habt, würde ich gern kurz eure Aufmerksamkeit auf ein Problem meinerseits richten und fragen ob ihr auch schon das Problem hattet und fall ja wie ihr es gelöst habt:
https://hyperion-project.org/t…utvf007-killt-lirc.11241/
Wie gesagt mit einem „klassischen“ Splitter+DA Wandler+USB Grabber funktioniert lirc.
Mit einem HDMI-USB Grabber funktionier kein lirc mehr.
Ich würde gerne das ganze mit einem „HDMI Video Capture mit loop“ testen.
Welchen kann man uneingeschränkt empfehlen?
Gruß
Jan
Ich habe in dem Pi auf dem Hyperion läuft auch ein Funkmodul für Homematic das auf mehreren GPIOs sitzt. Dem ist es egal ob Hyperion läuft oder nicht.
ich denke daher nicht dass Hyperion die GPIOs beeinflusst.