Hi,
I am running Hyperion (installed through latest Hypercon) on a rpi3 model b+ (running raspbian buster) and APA102 LEDs directly connected to the rpi.
For the USB Grabber I have an Easycap (model Bus 001 Device 005: ID 1b71:3002 Fushicai USBTV007 Video Grabber [EasyCAP] but also tested with a Syntek one).
On both grabbers I have a weak image quality as you can see on the pic attached (that I had to grab with the command below due to the crash on Hypercon reported below):
hyperion-v4l2 -d /dev/video0 -v PAL --input 1 --width 720 --height 576 -s 2 -f 2 --skip-reply --screenshot
Since I have tried two grabbers (although they can be both faulty but at least the Syntek one was ok when I used it for some VCR recording) what can be the issue?
From my perspective the HDMI2AV can be faulty and I have already ordered a new one. But on the software side can something be wrong also?
Also another issue is that if I try to right click on Hypercon and try to Take Grabber Screenshot Hyperion crashes with the following log:
sh in: May 18 18:08:49 raspberrypi hyperiond[4449]: INFO: Application closed with code 0
ssh in: May 18 18:08:49 raspberrypi hyperiond[4449]: V4L2GRABBER INFO: stopped
ssh in: May 18 18:08:49 raspberrypi hyperiond[4449]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: May 18 18:08:49 raspberrypi systemd[1]: Stopping Hyperion Systemd service...
ssh in: May 18 18:08:50 raspberrypi systemd[1]: hyperion.service: Succeeded.
ssh in: May 18 18:08:50 raspberrypi systemd[1]: Stopped Hyperion Systemd service.
Full Start log:
ssh in: May 18 18:07:25 raspberrypi systemd[1]: Started Hyperion Systemd service.
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: Hyperion Ambilight Deamon (4449)
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: Version : V1.03.5 (GitHub-66bef6b/fb413cd-1566231780
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: Build Time: Aug 25 2019 10:39:29
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: HYPERION INFO: ColorTransform 'default' => [0; 59]
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: HYPERION INFO: ColorCorrection 'default' => [0; 59]
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: HYPERION INFO: ColorAdjustment 'default' => [0; 59]
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: LEDDEVICE INFO: configuration:
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: {
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: "colorOrder" : "bgr",
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: "name" : "hyperionrpi",
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: "output" : "/dev/spidev0.0",
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: "rate" : 1000000,
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: "type" : "apa102"
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: }
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: INFO: Creating linear smoothing
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=33;settlingTime_ms=200;updateDelay=0
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: INFO: Hyperion started and initialised
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: BLACKBORDER INFO: threshold set to 0.25 (64)
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: BLACKBORDER INFO: mode:default
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: started
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: INFO: Json server created and started on port 19444
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: INFO: Proto server created and started on port 19445
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: V4L2GRABBER INFO: width=720 height=576
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: V4L2GRABBER INFO: pixel format=YUYV
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: BLACKBORDER INFO: threshold set to 0.25 (64)
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: BLACKBORDER INFO: mode:default
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: V4L2GRABBER INFO: started
ssh in: May 18 18:07:26 raspberrypi hyperiond[4449]: INFO: V4L2 grabber created and started
ssh in: May 18 18:07:27 raspberrypi hyperiond[4449]: V4L2GRABBER INFO: stopped
Alles anzeigen
My Hyperion Config is attached.
Thanks for the help!