Help with 18ec:5555 Arkmicro Technologies Inc.

    Connected to the yellow composite.


    v4l2-ctl -n:


    Code
    ioctl: VIDIOC_ENUMINPUT
   Input  : 0
   Name  : Camera 1
   Type  : 0x00000002 (Camera)
   Audioset  : 0x00000000
   Tuner  : 0x00000000
   Standard  : 0x0000000000000000 ()
   Status  : 0x00000000 (ok)
   Capabilities: 0x00000000 (not defined)



    v4l2-ctl -I:


    Code
    Video input : 0 (Camera 1: ok)
    • Offizieller Beitrag

    The console output is very strange.
    Here is my console output from a utv007 grabber with the same cables:


    You can try switching between the two inputs:

    Code
    v4l2-ctl -i 0


    or

    Code
    v4l2-ctl -i 1


    Just start hyperion after the change and see what happens.
    If nothing happens, I recommend changing the grabber.
    Since I don't have the hardware, I can't do anything for you. Sorry

    Weird. Mine still isn't working. Well, bearing in mind that when I first installed NG and everything was set to auto like you and all worked well, then it stopped working despite troubleshooting/reinstalling etc I can only conclude that it's faulty.


    I've got an STK on order (has been for over a week) but they still haven't dispatched. If they don't dispatch tomorrow, I'm just gonna grab one from Sun Stars on Ali.

    Do you have an other PI where you can test the USB gabber? I can switch the grabber between my pi's and they work.


    Al tough we have the same chip, mine was advertised as a UTV007 and uses a easycap style case. So maybe there is still some differences?

    Yes, I have already checked. The result is the same on both and my Ubuntu laptop. Mine was advertised as the STK1160, and by the time I received it, "STK1160" had been removed from the listing, so I think they knew it was not. I already got a refund for it. I sent the seller the lsusb screenshot and they refunded without question. I have ordered another unit from a different supplier. I will see what happens when it arrives.

    The STK is here! And it really is an STK:


    Code
    Bus 001 Device 004: ID 05e1:0408 Syntek Semiconductor Co., Ltd STK1160 Video Capture Device


    Problem is, I cannot get it to work. I am getting these errors:


    Code
    [hyperiond V4L2:/dev/video0] (ERROR) Frame too small: 827264 != 829440
[hyperiond V4L2:/dev/video0] (ERROR) Frame too small: 827606 != 829440
[hyperiond V4L2:/dev/video0] (ERROR) Frame too small: 827116 != 829440
[hyperiond V4L2:/dev/video0] (ERROR) Frame too small: 826594 != 829440


    v4l2-ctl -I:


    Code
    Video input : 0 (Composite0: ok)


    v4l2-ctl -n:



    I have tried 0-3.. but the output is black in the preview...


    Any ideas?

    :(


    What is that supposed to mean?


    "Hey Bob! Switch to NG!"?


    I am.. as mentioned at the start of this thread. In fact, alpha 6.


    "And get an STK1160 or UTV007!"


    Ok, done...


    I know this is alpha stage, but if it's what you're recommending then there's not much I can do because that's what I'm running..... HyperBian in fact.


    Seems like NG has some real issues around hardware detection/use.


    5 Mal editiert, zuletzt von bob21 ()

    This is definitely a bug. I have just re-imaged the SD with HyperBian and it's working again..... Exact same settings. All I change is UDP for WLED, set number of LEDs and turn platform cap off.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden