Hyperion.ng + WLED no grabbed signal for few seconds

Bub4 · 16. Dezember 2020

Hi,
I have a strange behaviour which occurs on a regular basis every day but randomly timed:
Hyperion suddenly stops and all LEDs shine in the WLED configured colours for a few seconds (both instances). Then hyperion takes over again with the grabbed video information and all is back to normal.

Here is the debug log:

Code

2020-12-14T18:49:35.507Z [hyperiond DAEMON] (INFO) CEC handler created
2020-12-14T18:49:35.510Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
2020-12-14T18:49:35.512Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
2020-12-14T18:49:35.512Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory /storage/hyperion/custom-effects
2020-12-14T18:49:35.522Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:109:SettingsManager()) Settings database initialized
2020-12-14T18:49:35.523Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
2020-12-14T18:49:35.523Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2020-12-14T18:49:35.550Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:109:SettingsManager()) Settings database initialized
2020-12-14T18:49:35.551Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
2020-12-14T18:49:35.551Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2020-12-14T18:49:35.561Z [hyperiond DAEMON] (INFO) set screen capture device to 'x11'
2020-12-14T18:49:35.561Z [hyperiond X11GRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-12-14T18:49:35.561Z [hyperiond DAEMON] (INFO) X11 grabber created
2020-12-14T18:49:35.561Z [hyperiond V4L2:AUTO] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2020-12-14T18:49:35.561Z [hyperiond V4L2:AUTO] (INFO) Signal threshold set to: {12, 12, 12}
2020-12-14T18:49:35.561Z [hyperiond V4L2:AUTO] (INFO) CEC detection is now disabled
2020-12-14T18:49:35.561Z [hyperiond V4L2:AUTO] (INFO) Signal detection is now disabled
2020-12-14T18:49:35.561Z [hyperiond V4L2:AUTO] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2020-12-14T18:49:35.561Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:630:handleSettingsUpdate()) V4L2 grabber created
2020-12-14T18:49:35.562Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:28:JsonServer()) Created instance
2020-12-14T18:49:35.563Z [hyperiond JSONSERVER] (INFO) Started on port 19444
2020-12-14T18:49:35.544Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'wled'.
2020-12-14T18:49:35.546Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:56:init())
2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":108,"hardwareLedCount":108,"host":"192.168.178.41","latchTime":0,"type":"wled"}]
2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:64:init()) DeviceType   : wled
2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:65:init()) LedCount     : 108
2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:66:init()) ColorOrder   : rgb
2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:67:init()) LatchTime    : 0
2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:109:initRestAPI())
2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:120:initRestAPI()) [1]
2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":108,"hardwareLedCount":108,"host":"192.168.178.41","latchTime":0,"port":19446,"type":"wled"}]
2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:43:init()) Successfully parsed 192.168.178.41 as an IP-address.
2020-12-14T18:49:35.547Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:73:init()) UDP socket will write to 192.168.178.41:19446
2020-12-14T18:49:35.548Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:98:init()) Hostname/IP  : 192.168.178.41
2020-12-14T18:49:35.548Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:99:init()) Port         : 19446
2020-12-14T18:49:35.548Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:103:init()) [1]
2020-12-14T18:49:35.544Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2020-12-14T18:49:35.548Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 280 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 50 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 140.000000 ms
2020-12-14T18:49:35.548Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times
2020-12-14T18:49:35.548Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401
2020-12-14T18:49:35.549Z [hyperiond EFFECTENGINE] (INFO) Run effect "Knight rider" on channel 0
2020-12-14T18:49:35.549Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Knight rider], smoothCfg [2]
2020-12-14T18:49:35.549Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2020-12-14T18:49:35.549Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Knight rider' started
2020-12-14T18:49:35.549Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/GRABBER' with priority 250 as inactive
2020-12-14T18:49:35.549Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: enabled
2020-12-14T18:49:35.550Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2020-12-14T18:49:35.571Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started
2020-12-14T18:49:35.550Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2020-12-14T18:49:35.550Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.178.41/json/state] [{"on":true}]
2020-12-14T18:49:35.562Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2020-12-14T18:49:35.562Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 280 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 50 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 140.000000 ms
2020-12-14T18:49:35.562Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times
2020-12-14T18:49:35.562Z [hyperiond EFFECTENGINE] (INFO) Run effect "Knight rider" on channel 0
2020-12-14T18:49:35.562Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Knight rider], smoothCfg [2]
2020-12-14T18:49:35.562Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2020-12-14T18:49:35.562Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Knight rider' started
2020-12-14T18:49:35.563Z [hyperiond EFFECTENGINE] (INFO) Run effect "Warm mood blobs" on channel 254
2020-12-14T18:49:35.563Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Warm mood blobs], smoothCfg [2]
2020-12-14T18:49:35.563Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 254 as inactive
2020-12-14T18:49:35.563Z [hyperiond HYPERION] (INFO) Initial background effect 'Warm mood blobs' started
2020-12-14T18:49:35.563Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/GRABBER' with priority 250 as inactive
2020-12-14T18:49:35.563Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: enabled
2020-12-14T18:49:35.571Z [hyperiond X11] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2020-12-14T18:49:35.563Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2020-12-14T18:49:35.571Z [hyperiond HYPERION] (INFO) Hyperion instance 'QMedia' has been started
2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'wled'.
2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:56:init())
2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":89,"hardwareLedCount":89,"host":"192.168.178.54","latchTime":0,"type":"wled"}]
2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:64:init()) DeviceType   : wled
2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:65:init()) LedCount     : 89
2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:66:init()) ColorOrder   : rgb
2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:67:init()) LatchTime    : 0
2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:109:initRestAPI())
2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:120:initRestAPI()) [1]
2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"rgb","currentLedCount":89,"hardwareLedCount":89,"host":"192.168.178.54","latchTime":0,"port":19446,"type":"wled"}]
2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 0ms
2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:43:init()) Successfully parsed 192.168.178.54 as an IP-address.
2020-12-14T18:49:35.564Z [hyperiond LEDDEVICE] (DEBUG) (ProviderUdp.cpp:73:init()) UDP socket will write to 192.168.178.54:19446
2020-12-14T18:49:35.565Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:98:init()) Hostname/IP  : 192.168.178.54
2020-12-14T18:49:35.565Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:99:init()) Port         : 19446
2020-12-14T18:49:35.565Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:103:init()) [1]
2020-12-14T18:49:35.565Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2020-12-14T18:49:35.565Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.178.54/json/state] [{"on":true}]
2020-12-14T18:49:35.570Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
2020-12-14T18:49:35.571Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
2020-12-14T18:49:35.572Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2020-12-14T18:49:35.578Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2020-12-14T18:49:35.610Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2020-12-14T18:49:35.610Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2020-12-14T18:49:35.610Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2020-12-14T18:49:35.611Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2020-12-14T18:49:35.611Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver'
2020-12-14T18:49:35.611Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:175:handleSettingsUpdate()) Setup SSL certificate
2020-12-14T18:49:35.612Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:191:handleSettingsUpdate()) Setup private SSL key
2020-12-14T18:49:35.612Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver'
2020-12-14T18:49:35.620Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active
2020-12-14T18:49:35.620Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2020-12-14T18:49:35.620Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255]
2020-12-14T18:49:35.620Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
2020-12-14T18:49:35.621Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2020-12-14T18:49:35.621Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.178.41/json/state] [{"on":true}]
2020-12-14T18:49:35.639Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 0 is now active
2020-12-14T18:49:35.639Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2020-12-14T18:49:35.639Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255]
2020-12-14T18:49:35.639Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
2020-12-14T18:49:35.639Z [hyperiond LEDDEVICE] (DEBUG) (LedDeviceWled.cpp:132:powerOn())
2020-12-14T18:49:35.639Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:150:put()) PUT: [http://192.168.178.54/json/state] [{"on":true}]
2020-12-14T18:49:35.657Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:207:setInput()) Priority 254 is now active
2020-12-14T18:49:35.667Z [hyperiond X11GRABBER] (INFO) Update of screen resolution: [0x0]  to [1920x1080]
2020-12-14T18:49:35.667Z [hyperiond X11GRABBER] (INFO) Using XRender for grabbing
2020-12-14T18:49:35.667Z [hyperiond X11GRABBER] (INFO) Update output image resolution: [0x0]  to [240x135]
2020-12-14T18:49:35.667Z [hyperiond X11GRABBER] (INFO) Capture interface is now enabled
2020-12-14T18:49:35.669Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 250 is now active
2020-12-14T18:49:35.669Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 250 is now active
2020-12-14T18:49:36.494Z [hyperiond X11GRABBER] (INFO) Update of screen resolution: [1920x1080]  to [1920x1080]
2020-12-14T18:49:36.494Z [hyperiond X11GRABBER] (INFO) Using XRender for grabbing
2020-12-14T18:49:36.494Z [hyperiond X11GRABBER] (INFO) Update output image resolution: [240x135]  to [240x135]
2020-12-14T18:49:38.071Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200]
2020-12-14T18:49:38.072Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2020-12-14T18:49:38.072Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2020-12-14T18:49:38.109Z [hyperiond LEDDEVICE] (DEBUG) (ProviderRestApi.cpp:179:getResponse()) Reply.httpStatusCode [200]
2020-12-14T18:49:38.110Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2020-12-14T18:49:38.110Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2020-12-14T18:49:40.657Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0
2020-12-14T18:49:40.657Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2020-12-14T18:49:40.658Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 280 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 50 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 140.000000 ms
2020-12-14T18:49:40.658Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0]
2020-12-14T18:49:40.658Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0
2020-12-14T18:49:40.658Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2020-12-14T18:49:40.658Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 280 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 50 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 140.000000 ms
2020-12-14T18:49:40.659Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0]
2020-12-14T18:49:40.907Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 250
2020-12-14T18:49:40.908Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 250
2020-12-14T18:49:40.908Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[250], previousPriority[0]
2020-12-14T18:49:40.909Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[250], previousPriority[0]
2020-12-14T19:39:26.983Z [hyperiond X11GRABBER] (INFO) Update of screen resolution: [1920x1080]  to [1920x1080]
2020-12-14T19:39:26.983Z [hyperiond X11GRABBER] (INFO) Using XRender for grabbing
2020-12-14T19:39:26.983Z [hyperiond X11GRABBER] (INFO) Update output image resolution: [240x135]  to [240x135]
2020-12-14T19:39:30.885Z [hyperiond X11GRABBER] (INFO) Update of screen resolution: [1920x1080]  to [1920x1080]
2020-12-14T19:39:30.885Z [hyperiond X11GRABBER] (INFO) Using XRender for grabbing
2020-12-14T19:39:30.886Z [hyperiond X11GRABBER] (INFO) Update output image resolution: [240x135]  to [240x135]
2020-12-14T20:54:46.528Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.51
2020-12-14T20:54:46.528Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.51' switch to Hyperion instance 0
2020-12-14T20:54:50.179Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.51

Alles anzeigen

It occurred on 20:54 but I can't seem to find anything strange in the logs.

System
LibreELEC (official): 9.2.6 (Generic.x86_64)
Hyperion.ng alpha9 - Plattform grabber
WLED build 2008310

The WLED WiFi connection is stable with an uptime of >10 days

Does anyone have an idea?

Thanks

Lord-Grey · 16. Dezember 2020

We jointly worked with the WLED team to have here a better integration in upcoming WLED/Hyperion releases, see https://github.com/Aircoookie/WLED/issues/1308
In the meantime you might want to change the WLED sync timeout to the maximum value (in the WLED sync config UI)

WLED turns to default, if no data is received because of no updates received from hyperion.
Setting the WLED timeout to maximum, will reduce the likelihood of having this happinging.

Bub4 · 16. Dezember 2020

Thank you very much! appreciate it.
I will apply this and update the experience

Bub4 · 28. Dezember 2020

Thank again @Lord-Grey -> so far no issues anymore. Works very nice and stable (hyperion.ng overall!!)

Jetzt mitmachen!