Hello all,
i configured my setup with a Raspberry Pi 4 and the Raspberry Pi OS lite with the following Tutorial.
I use a
My Raspberry Pi is connected with the Arduino via USB and gets detected by Hyperion.
The Arduino is connected with the LED strip on Pin 6.
Futhermore i have a
The Video Grabber gets detected by Hyperion as USB Recording Hardware "AV TO USB 2.0".
So far my setup "works". When i start my Raspberry, first the LED blink twice white. After that i get the Rainbow swirl.
I can even visualize the video input and see my PS4 screen.
But the colors I see are totally incorrect. For example, when I use the RGB Byte order Assistent, I always see two colors. My strip is then exactly divided in two which show two different colors.
At red: the first half is green and the second half is red.
At green: the first half is blue and the second half is green.
So instead of only showing one color i always get two different colors.
Sometimes when i restart, it only blinks twice and nothing happens after.
My Arduino code is from the hyperion Github.
Hyperion config:
When conected to the RaPi I can only find the "hyperion.config.jsoon.default". Where can I find my modified one?
Thanks for the help!