Hello Hyperion Community
In the beginning I need to say i just had run Hyperion like 5years ago with a video graber etc.
After getting now a new TV i just decided to get Hyperion with it too.
So i just looked and wanted to use an PI 4 as Video Input for IPTV.
So i installed Libraelec and used the "wget -qO- https://git.io/Jz5Qp | bash" to install hyperion
I manged to work that i have the Weboveriew, i set in the Hardware settings ws281x (I have ws2812b) the GPIO is set to 18 and i connected the DI Input to it (correct dirrection) The + is wired to my 5V 20A Power Supply. The Ground is togther with the PI on output 6.
this are my settings and when i go to the efect configurator and load an effect and start it nothing shows up.
The Supply has perfect 5V.
Here is my debug protocol
anyone has some suggest for me?
2023-10-19T17:07:15.397Z [DAEMON] (INFO) CEC handler created
2023-10-19T17:07:15.406Z [EFFECTFILES] (INFO) 40 effects loaded from directory :/effects/
2023-10-19T17:07:15.409Z [EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
2023-10-19T17:07:15.410Z [EFFECTFILES] (INFO) 0 effects loaded from directory /storage/hyperion/custom-effects/
2023-10-19T17:07:15.452Z [DAEMON] (INFO) DISPMANX frame grabber created
2023-10-19T17:07:15.467Z [DAEMON] (ERROR) Lock/unlock handler- Session bus is not connected
2023-10-19T17:07:15.454Z [FLATBUFSERVER] (INFO) Started on port 19400
2023-10-19T17:07:15.455Z [PROTOSERVER] (INFO) Started on port 19445
2023-10-19T17:07:15.465Z [LEDDEVICE|First LED Hardware instance] (INFO) Start LedDevice 'ws2812spi'.
2023-10-19T17:07:15.465Z [LEDDEVICE|First LED Hardware instance] (INFO) Switching device ws2812spi ON
2023-10-19T17:07:15.465Z [LEDDEVICE|First LED Hardware instance] (INFO) Device ws2812spi is ON
2023-10-19T17:07:15.466Z [LEDDEVICE|First LED Hardware instance] (INFO) LedDevice 'ws2812spi' enabled
2023-10-19T17:07:15.466Z [EFFECTENGINE|First LED Hardware instance] (INFO) Run effect "Rainbow swirl fast" on channel 1
2023-10-19T17:07:15.467Z [HYPERION|First LED Hardware instance] (INFO) Initial foreground effect 'Rainbow swirl fast' started
2023-10-19T17:07:15.469Z [HYPERION-INSTMGR] (INFO) Hyperion instance 'First LED Hardware instance' has been started
2023-10-19T17:07:15.470Z [JSONSERVER] (INFO) Started on port 19444
2023-10-19T17:07:15.488Z [WEBSERVER] (INFO) 'Hyperion http-Webserver' started on port 8090
2023-10-19T17:07:15.563Z [WEBSERVER] (INFO) 'Hyperion https-Webserver' started on port 8092
2023-10-19T17:07:18.515Z [EFFECTENGINE|First LED Hardware instance] (INFO) Effect [Rainbow swirl fast] finished
2023-10-19T17:07:18.571Z [LEDDEVICE|First LED Hardware instance] (INFO) Switching device ws2812spi OFF
2023-10-19T17:07:18.573Z [LEDDEVICE|First LED Hardware instance] (INFO) Device ws2812spi is OFF
2023-10-19T17:08:48.328Z [EFFECTENGINE|First LED Hardware instance] (INFO) Run effect "My Modded Effect" on channel 1
2023-10-19T17:08:48.384Z [LEDDEVICE|First LED Hardware instance] (INFO) Switching device ws2812spi ON
2023-10-19T17:08:48.384Z [LEDDEVICE|First LED Hardware instance] (INFO) Device ws2812spi is ON
2023-10-19T18:08:13.699Z [LEDDEVICE|First LED Hardware instance] (INFO) Switching device ws2812spi OFF
2023-10-19T18:08:13.700Z [LEDDEVICE|First LED Hardware instance] (INFO) Device ws2812spi is OFF
2023-10-19T18:08:13.701Z [LEDDEVICE|First LED Hardware instance] (INFO) Stopped LedDevice 'ws2812spi'
2023-10-19T18:08:13.702Z [LEDDEVICE|First LED Hardware instance] (INFO) Start LedDevice 'ws281x'.
2023-10-19T18:08:13.705Z [LEDDEVICE|First LED Hardware instance] (INFO) Switching device ws281x ON
2023-10-19T18:08:13.706Z [LEDDEVICE|First LED Hardware instance] (INFO) Device ws281x is ON
2023-10-19T18:08:13.707Z [LEDDEVICE|First LED Hardware instance] (INFO) LedDevice 'ws281x' enabled
2023-10-19T18:08:13.807Z [EFFECTENGINE|First LED Hardware instance] (INFO) Previous line repeats 1 times
2023-10-19T18:08:13.807Z [EFFECTENGINE|First LED Hardware instance] (INFO) Effect [My Modded Effect] finished
2023-10-19T18:08:24.404Z [LEDDEVICE|First LED Hardware instance] (INFO) Switching device ws281x OFF
2023-10-19T18:08:24.416Z [LEDDEVICE|First LED Hardware instance] (INFO) Device ws281x is OFF
2023-10-19T18:08:24.430Z [LEDDEVICE|First LED Hardware instance] (INFO) Stopped LedDevice 'ws281x'
2023-10-19T18:08:24.431Z [LEDDEVICE|First LED Hardware instance] (INFO) Start LedDevice 'ws281x'.
2023-10-19T18:08:24.433Z [LEDDEVICE|First LED Hardware instance] (INFO) Switching device ws281x ON
2023-10-19T18:08:24.434Z [LEDDEVICE|First LED Hardware instance] (INFO) Device ws281x is ON
2023-10-19T18:08:24.434Z [LEDDEVICE|First LED Hardware instance] (INFO) LedDevice 'ws281x' enabled
2023-10-19T18:08:31.080Z [EFFECTENGINE|First LED Hardware instance] (INFO) Run effect "My Modded Effect" on channel 1
2023-10-19T18:08:31.087Z [EFFECTENGINE|First LED Hardware instance] (INFO) Effect [My Modded Effect] finished
2023-10-19T18:09:20.457Z [EFFECTENGINE|First LED Hardware instance] (INFO) Run effect "My Modded Effect" on channel 1
2023-10-19T18:09:20.500Z [EFFECTENGINE|First LED Hardware instance] (INFO) Effect [My Modded Effect] finished
Alles anzeigen
Just a question:
When I would use an WLed with an ESP32 i could connect to the hyperion? If yes what is about the Latency or should it be connected with USB?