HDCP 2.2 Splitter (Sky Q)

  • Hi, I'm using a Android Grabber setup, everything works well apart from DRM and HDCP 2.2 sources. I'm not too fussed about DRM support, but wondering what is the best splitter I can use with my Sky Q box connected via my AVR HDCP 2.2 HDMI. It should output 4k@60fps HDR10.


    Current Setup:

    • ESP32 WLED
    • Android Hyperion Grabber
    • Denon AVR-X2300W
    • Sony Android TV / Shield TV

    I'm looking for a inexpensive (under 20) simple setup. Will this splitter work to pass through?: UGREEN Splitter Supports Compatible Projector


    Here is my AVR, it has 2 Monitor Outs via HDCP 2.2:




    Thanks

    • Official Post

    You need a splitter that has 4K 60Hz, HDCP 2.2, EDID management and scaler, the UGREEN is an HDMI switch, since you have an AVR (to which your devices are connected?) you don't need a switch.


    Under 20 you won't find anything, Grabber 10, Splitter about 40



    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    -
    AudioDSP: miniDSP 2x4HD - Amp: Pentagon - Lautsprecher ELAC / ARENDAL
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    -
    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.16-beta.1 (dreamOS)
    Hyperion-ng (Debian bullseye)
    -
    6 x ESP32/Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    FeinTech VSP01201 - Grabber Macrosilicon

    LG TV Hyperion webOS & PicCap


    snoozer_likelinux_manvtkns.gif


    Ambilight for ever

    • Official Post

    I don't know any of the 3 spitters so all you can do is try and report back.

    In terms of features it could be suitable.


    regards pclin

  • I will report back with findings.


    Just one more question, does it have to be 2 outputs or it can be just 1?


    Thanks

    • Official Post

    Splitter = 1 IN 2 OUT

    OUT 1 > TV

    OUT 2 > Grabber


    regards pclin

  • Can I not make do without a grabber? I'd rather just use the Android grabber app with a splitter instead, if possible.

    • Official Post
    Quote from nrx

    everything works well apart from DRM and HDCP 2.2 sources

    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    -
    AudioDSP: miniDSP 2x4HD - Amp: Pentagon - Lautsprecher ELAC / ARENDAL
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    -
    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.16-beta.1 (dreamOS)
    Hyperion-ng (Debian bullseye)
    -
    6 x ESP32/Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    FeinTech VSP01201 - Grabber Macrosilicon

    LG TV Hyperion webOS & PicCap


    snoozer_likelinux_manvtkns.gif


    Ambilight for ever

  • Does the Capture Card have to match the same resolution as the splitter, or can I get away with a 1080p version?


    Thanks

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!