Hi All, I have installed some components on my TV last weekend and running into issue with the LEDs.
I have tried to find something on this forum and also reconnected (re-soldered) some wires, but still having issues.
Hope someone here recognizes my situation below.
I am not home at the moment, so apologies for the lack of photos / logs / files etc.
Please let me know what can help and I will provide more info later.
For now let me describe my problem.
Setup:
RPi 3 + Raspbian Stretch Lite + Hyperion
APA102 LED strip (+/- 3 meter)
(HDMI>AV converter + UTV007 grabber and 5V15A PSU for LEDs)
Situation:
I have just installed Raspbian and Hyperion and created a Hyperion configuration file. Now I am trying to test the strip with the Hyperion color wheel to see if everything is working as expected, which it is not in my opinion:)
1) After booting the RPi3 the Rainbow Swirl shows rainbow colors (all LEDs are lighting up) but the swirl does not move.
2) Trying RGB colors in Hyperion color-wheel:
- setting Blue (0/0/255) gives me a solid blue --> OK
- setting Green (0/255/0) gives me a solid green --> OK
- setting Red (255/0/0) gives me a blue with red flickering between it (when setting something like 214/0/0 then it shows some "solid" red)
- With the settings above going round the color wheel, the bottom half (blue via turquoise to green) is working OK. The top half (green via yellow to red and on to blue) gives me erratic flickering of the LEDs, mainly showing blue with some small flickering hint of the intended color.
So now I am not sure if my connections are not soldered correctly or it is in software driving the LEDs or any other problem.
As said, hope someone can point me in the right direction.
Thanks in advance already!