When I start Hyperion the LEDs will all light up in a rainbow of colors so I know they are working. But after that booteffect they just stop working. If I try to use the hypercon to set the LEDs to a single color I always get:
ssh: $ /storage/hyperion/bin/hyperion-remote.sh -c 2e18ff
ssh: hyperion-remote:
ssh: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh: build time: Apr 5 2018 01:57:05
ssh Error: Unable to connect to host
The logs don't show anything either:
Unable to connect to host
ssh out: killall hyperiond 2>/dev/null
sftp Send Hyperion Config - Sourcepath: , Targetpath: /storage/.config/, Filename: hyperion.config.json
ssh out: killall hyperiond 2>/dev/null
ssh out: /storage/.config/autostart.sh > /dev/null 2>&1 &
ssh out: killall hyperiond 2>/dev/null ; /storage/hyperion/bin/hyperion-v4l2.sh --device /dev/video0 --video-standard NTSC --input 0 --width 1080 --height 608 --crop-left 4 --crop-right 13 --crop-top 6 --crop-bottom 2 --size-decimator 1 --frame-decimator 2 --red-threshold 0.0 --green-threshold 0.0 --blue-threshold 0.0 --screenshot
ssh in: hyperion-v4l2:
ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: build time: Apr 5 2018 01:57:25
ssh in: V4L2GRABBER INFO: width=720 height=480
ssh in: V4L2GRABBER INFO: pixel format=YUYV
ssh in: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: V4L2GRABBER INFO: started
ssh in: V4L2GRABBER INFO: stopped
sftp getFile(./screenshot.png, java.awt.Image)
ssh out: killall hyperiond 2>/dev/null ; /storage/hyperion/bin/hyperion-v4l2.sh --device /dev/video0 --video-standard NTSC --input 0 --width 1080 --height 608 --crop-left 4 --crop-right 13 --crop-top 6 --crop-bottom 2 --size-decimator 1 --frame-decimator 2 --red-threshold 0.0 --green-threshold 0.0 --blue-threshold 0.0 --screenshot
ssh in: hyperion-v4l2:
ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: build time: Apr 5 2018 01:57:25
ssh in: V4L2GRABBER INFO: width=720 height=480
ssh in: V4L2GRABBER INFO: pixel format=YUYV
ssh in: V4L2GRABBER INFO: signal threshold set to: {0,0,0}
ssh in: V4L2GRABBER INFO: started
ssh in: V4L2GRABBER INFO: stopped
sftp getFile(./screenshot.png, java.awt.Image)
ssh out: /storage/hyperion/bin/hyperion-remote.sh -c 2e18ff
ssh in: hyperion-remote:
ssh in: version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: build time: Apr 5 2018 01:57:05
ssh out: Unable to connect to host
Alles anzeigen
I should also note a couple things.
1) I am not powering this LED strip with an external power brick, there are only 94 LEDs total and they are being powered directly from the PI.
2) Before I had cut LED strip and fixed it to my TV sides, I plugged it directly into my pi and used Hypercon to set ALL the LEDs by specifying the set up as a single side of my TV has 128 LEDs and nothing else. So that way every single LED on the strip was addressable by Hypercon because it thought only a single side of the TV had LEDs and I was able to us the color wheel to set them all to yellow. o it's weird to me that they no longer work at all now.
Could this be because it's not getting enough power?
I have uploaded my config as well.