Hello
I have already done a "french talk" post but I repost here to have more answer with English community:
I try to make working Hyperion on my Fresh Openelec Install (6.0.3) on a Raspberry pi 2.
to do so, I do the commands bellow:
mount -o remount,rw /flash
cd /flash/overlays/
curl -L --output enable-spi-overlay.dtb --get https://dl.dropboxusercontent.com/u/3669512/temp/enable-spi-overlay.dtb
nano /flash/config.txt
to add at the end of the file
Then
reboot
curl -L --output install_hyperion.sh --get https://raw.githubusercontent.com/tvdzwan/hyperion/master/bin/install_hyperion.sh
sh ./install_hyperion.sh
At this step, I think Hyperion should work.
I generate my conf file [MEDIA=pastebin]W4b7t6nw[/MEDIA]
and uploaded it in /storage/hyperion/config
After that I pluged my led (only DI & CI) to my RPI2 as in the picture below:
My power supply is enoughly strong for my built ( 10A, 5V)
So i try to make it works:
the initial rainbow works but the troubles come after...
I display a full red picture on my Kodi, to test the led. (to test the color order)
But the led display all the color of the rainbow and white or light off, never stop changing of color, flashing /moving.
They never stop on a single color.
the result of the previous command is:
Hyperion Ambilight Deamon (1876)
Version : V1.03.2 (brindosch-99d9396/d3713a8-1469452981
Build Time: Jul 25 2016 06:54:40
INFO: Selected configuration file: /storage/hyperion/config/hyperion.config.json
HYPERION INFO: ColorTransform 'default' => [0; 97]
HYPERION INFO: ColorCorrection 'default' => [0; 97]
HYPERION INFO: ColorAdjustment 'default' => [0; 97]
LEDDEVICE INFO: configuration:
{
"colorOrder" : "rgb",
"name" : "MyHyperionConfig",
"output" : "/dev/spidev0.0",
"rate" : 1000000,
"type" : "ws2801"
}
INFO: Creating linear smoothing
HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
EFFECTENGINE INFO: 27 effects loaded from directory /storage/hyperion/effects
EFFECTENGINE INFO: Initializing Python interpreter
INFO: Hyperion started and initialised
INFO: Boot sequence 'Rainbow swirl' EFFECTENGINE INFO: run effect Rainbow swirl on channel 0
BLACKBORDER INFO: threshold set to 0 (0)
BLACKBORDER INFO: mode:default
started
INFO: Kodi checker created and started
INFO: Json server created and started on port 19444
INFO: Proto server created and started on port 19445
INFO: Boblight server created and started on port 19333
DISPMANXGRABBER INFO: Display opened with resolution: 1280x800
BLACKBORDER INFO: threshold set to 0 (0)
BLACKBORDER INFO: mode:default
INFO: Frame grabber created and started
KODICHECK ERROR: Kodi Connection error (0)
BORDER SWITCH REQUIRED!!
CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
EFFECTENGINE INFO: effect finished
KODICHECK ERROR: Kodi Connection error (0)
KODICHECK ERROR: Kodi Connection error (0)
KODICHECK ERROR: Kodi Connection error (0)
KODICHECK ERROR: Kodi Connection error (0)
KODICHECK ERROR: Kodi Connection error (0)
Alles anzeigen
Can you please help me ?