Komisch, habe gerade mein Netzteil ausgesteckt um die Drähte zu entfernen.
Auf einmal leuchten nacheinander die einzelnen LEDs vom ersten Stück in der Laufrichtung des Pfeils.
Was sagt mir das?
LEDs leuchten nicht
- franzli
- Erledigt
-
-
Absolut nichts, die kriegen einfach Fehlsignale, wenn der Strom zu schwach wird. Immerhin ein Zeichen, dass die LEDs evtl. noch nicht defekt sind.
-
Was kann ich denn nun machen?
-
Wie gesagt, erstmal kleiner Versuchsaufbau mit Stromversorgung vom Pi und gucken, ob das geht.
-
Stehe gerade auf dem Schlauch.
Wie verbinde ich die LEDs direkt mit dem pi? -
nochmal ein log:
SH Traffic:
ssh connected
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
sftp Send Hyperion Config - Sourcepath: C:/Users/Fabian/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
sftp Send Hyperion Config - Sourcepath: C:/Users/Fabian/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
sftp Send Hyperion Config - Sourcepath: C:/Users/Fabian/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh disconnected
ssh connected
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
sftp Send Hyperion Config - Sourcepath: C:/Users/Fabian/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh disconnected
ssh connected
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
sftp Send Hyperion Config - Sourcepath: C:/Users/Fabian/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
sftp Send Hyperion Config - Sourcepath: C:/Users/Fabian/Downloads, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh disconnected
ssh connected
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
sftp Send Hyperion Config - Sourcepath: C:/Users/Fabian/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
sftp Send Hyperion Config - Sourcepath: C:/Users/Fabian/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
sftp Send Hyperion Config - Sourcepath: C:/Users/Fabian/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
sftp Send Hyperion Config - Sourcepath: C:/Users/Fabian/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
sftp Send Hyperion Config - Sourcepath: C:/Users/Fabian/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
sftp Send Hyperion Config - Sourcepath: C:/Users/Fabian/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh disconnected
ssh connected
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
sftp Send Hyperion Config - Sourcepath: C:/Users/Fabian/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh disconnected
ssh connected
sftp Send Hyperion Config - Sourcepath: C:/Users/Fabian/Desktop, Targetpath: /etc/hyperion/, Filename: hyperion.config.json
ssh out: sudo systemctl stop hyperion.service 2>/dev/null; sudo /etc/init.d/hyperion stop 2>/dev/null ; sudo /sbin/initctl stop hyperion 2>/dev/null
ssh out: sudo systemctl start hyperion.service 2>/dev/null ; sudo /etc/init.d/hyperion start 2>/dev/null ; sudo /sbin/initctl start hyperion 2>/dev/null
ssh out: sudo journalctl -u hyperion.service 2>/dev/null
ssh in: -- Logs begin at Thu 2016-11-03 18:16:42 CET, end at Sun 2019-04-07 17:12:42 CEST. --
ssh in: Apr 06 19:39:49 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 06 19:39:49 osmc hyperiond[403]: Hyperion Ambilight Deamon (403)
ssh in: Apr 06 19:39:49 osmc hyperiond[403]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 06 19:39:49 osmc hyperiond[403]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 06 19:39:50 osmc hyperiond[403]: ERROR: No valid config found
ssh in: Apr 06 19:39:50 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 06 19:39:50 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 06 19:39:50 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 06 19:39:50 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 06 19:39:50 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 06 19:39:50 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 06 19:39:50 osmc hyperiond[431]: Hyperion Ambilight Deamon (431)
ssh in: Apr 06 19:39:50 osmc hyperiond[431]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 06 19:39:50 osmc hyperiond[431]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 06 19:39:50 osmc hyperiond[431]: ERROR: No valid config found
ssh in: Apr 06 19:39:50 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 06 19:39:50 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 06 19:39:50 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 06 19:39:50 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 06 19:39:50 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 06 19:39:50 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 06 19:39:50 osmc hyperiond[433]: Hyperion Ambilight Deamon (433)
ssh in: Apr 06 19:39:50 osmc hyperiond[433]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 06 19:39:50 osmc hyperiond[433]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 06 19:39:50 osmc hyperiond[433]: ERROR: No valid config found
ssh in: Apr 06 19:39:50 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 06 19:39:50 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 06 19:39:50 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 06 19:39:51 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 06 19:39:51 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 06 19:39:51 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 06 19:39:51 osmc hyperiond[435]: Hyperion Ambilight Deamon (435)
ssh in: Apr 06 19:39:51 osmc hyperiond[435]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 06 19:39:51 osmc hyperiond[435]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 06 19:39:51 osmc hyperiond[435]: ERROR: No valid config found
ssh in: Apr 06 19:39:51 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 06 19:39:51 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 06 19:39:51 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 06 19:39:51 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 06 19:39:51 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 06 19:39:51 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 06 19:39:51 osmc hyperiond[437]: Hyperion Ambilight Deamon (437)
ssh in: Apr 06 19:39:51 osmc hyperiond[437]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 06 19:39:51 osmc hyperiond[437]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 06 19:39:51 osmc hyperiond[437]: ERROR: No valid config found
ssh in: Apr 06 19:39:51 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 06 19:39:51 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 06 19:39:51 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 06 19:39:51 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 06 19:39:51 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 06 19:39:51 osmc systemd[1]: hyperion.service: Start request repeated too quickly.
ssh in: Apr 06 19:39:51 osmc systemd[1]: Failed to start Hyperion Systemd service.
ssh in: Apr 06 19:39:51 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 06 19:39:51 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 07 14:34:04 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 07 14:34:04 osmc hyperiond[1179]: Hyperion Ambilight Deamon (1179)
ssh in: Apr 07 14:34:04 osmc hyperiond[1179]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 07 14:34:04 osmc hyperiond[1179]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 07 14:34:04 osmc hyperiond[1179]: ERROR: No valid config found
ssh in: Apr 07 14:34:04 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 07 14:34:04 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 07 14:34:04 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 07 14:34:04 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 07 14:34:04 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 07 14:34:04 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 07 14:34:04 osmc hyperiond[1201]: Hyperion Ambilight Deamon (1201)
ssh in: Apr 07 14:34:04 osmc hyperiond[1201]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 07 14:34:04 osmc hyperiond[1201]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 07 14:34:04 osmc hyperiond[1201]: ERROR: No valid config found
ssh in: Apr 07 14:34:04 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 07 14:34:04 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 07 14:34:04 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 07 14:34:04 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 07 14:34:04 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 07 14:34:04 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 07 14:34:04 osmc hyperiond[1203]: Hyperion Ambilight Deamon (1203)
ssh in: Apr 07 14:34:04 osmc hyperiond[1203]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 07 14:34:04 osmc hyperiond[1203]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 07 14:34:04 osmc hyperiond[1203]: ERROR: No valid config found
ssh in: Apr 07 14:34:04 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 07 14:34:04 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 07 14:34:04 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 07 14:34:04 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 07 14:34:04 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 07 14:34:04 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 07 14:34:05 osmc hyperiond[1205]: Hyperion Ambilight Deamon (1205)
ssh in: Apr 07 14:34:05 osmc hyperiond[1205]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 07 14:34:05 osmc hyperiond[1205]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 07 14:34:05 osmc hyperiond[1205]: ERROR: No valid config found
ssh in: Apr 07 14:34:05 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 07 14:34:05 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 07 14:34:05 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 07 14:34:05 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 07 14:34:05 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 07 14:34:05 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 07 14:34:05 osmc hyperiond[1207]: Hyperion Ambilight Deamon (1207)
ssh in: Apr 07 14:34:05 osmc hyperiond[1207]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 07 14:34:05 osmc hyperiond[1207]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 07 14:34:05 osmc hyperiond[1207]: ERROR: No valid config found
ssh in: Apr 07 14:34:05 osmc systemd[1]: hyperion.service: Main process exited, code=exited, status=1/FAILURE
ssh in: Apr 07 14:34:05 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 07 14:34:05 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 07 14:34:05 osmc systemd[1]: hyperion.service: Service hold-off time over, scheduling restart.
ssh in: Apr 07 14:34:05 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 07 14:34:05 osmc systemd[1]: hyperion.service: Start request repeated too quickly.
ssh in: Apr 07 14:34:05 osmc systemd[1]: Failed to start Hyperion Systemd service.
ssh in: Apr 07 14:34:05 osmc systemd[1]: hyperion.service: Unit entered failed state.
ssh in: Apr 07 14:34:05 osmc systemd[1]: hyperion.service: Failed with result 'exit-code'.
ssh in: Apr 07 15:29:12 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: Hyperion Ambilight Deamon (1786)
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: HYPERION INFO: ColorTransform 'default' => [0; 82]
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: HYPERION INFO: ColorCorrection 'default' => [0; 82]
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: HYPERION INFO: ColorAdjustment 'default' => [0; 82]
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: LEDDEVICE INFO: configuration:
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: {
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: "colorOrder" : "rgb",
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: "name" : "MyHyperionConfig",
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: "output" : "/dev/spidev0.0",
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: "rate" : 1000000,
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: "type" : "ws2801"
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: }
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: INFO: Creating linear smoothing
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: INFO: Hyperion started and initialised
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: started
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: INFO: Json server created and started on port 19444
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: INFO: Proto server created and started on port 19445
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: INFO: Frame grabber created and started
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: BORDER SWITCH REQUIRED!!
ssh in: Apr 07 15:29:12 osmc hyperiond[1786]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 07 15:29:15 osmc hyperiond[1786]: EFFECTENGINE INFO: effect finished
ssh in: Apr 07 15:41:15 osmc hyperiond[1786]: INFO: Application closed with code 0
ssh in: Apr 07 15:41:15 osmc hyperiond[1786]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 07 15:41:15 osmc systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 07 15:41:15 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 07 15:41:16 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: Hyperion Ambilight Deamon (1926)
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: HYPERION INFO: ColorTransform 'default' => [0; 82]
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: HYPERION INFO: ColorCorrection 'default' => [0; 82]
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: HYPERION INFO: ColorAdjustment 'default' => [0; 82]
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: LEDDEVICE INFO: configuration:
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: {
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: "colorOrder" : "rgb",
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: "name" : "MyHyperionConfig",
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: "output" : "/dev/spidev0.0",
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: "rate" : 1000000,
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: "type" : "ws2801"
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: }
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: INFO: Creating linear smoothing
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 07 15:41:16 osmc hyperiond[1926]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 07 15:41:17 osmc hyperiond[1926]: INFO: Hyperion started and initialised
ssh in: Apr 07 15:41:17 osmc hyperiond[1926]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 07 15:41:17 osmc hyperiond[1926]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 15:41:17 osmc hyperiond[1926]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 15:41:17 osmc hyperiond[1926]: started
ssh in: Apr 07 15:41:17 osmc hyperiond[1926]: INFO: Json server created and started on port 19444
ssh in: Apr 07 15:41:17 osmc hyperiond[1926]: INFO: Proto server created and started on port 19445
ssh in: Apr 07 15:41:17 osmc hyperiond[1926]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
ssh in: Apr 07 15:41:17 osmc hyperiond[1926]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 15:41:17 osmc hyperiond[1926]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 15:41:17 osmc hyperiond[1926]: INFO: Frame grabber created and started
ssh in: Apr 07 15:41:17 osmc hyperiond[1926]: BORDER SWITCH REQUIRED!!
ssh in: Apr 07 15:41:17 osmc hyperiond[1926]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 07 15:41:20 osmc hyperiond[1926]: EFFECTENGINE INFO: effect finished
ssh in: Apr 07 15:41:59 osmc systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 07 15:41:59 osmc hyperiond[1926]: INFO: Application closed with code 0
ssh in: Apr 07 15:41:59 osmc hyperiond[1926]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 07 15:41:59 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 07 15:42:00 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: Hyperion Ambilight Deamon (1964)
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: HYPERION INFO: ColorTransform 'default' => [0; 82]
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: HYPERION INFO: ColorCorrection 'default' => [0; 82]
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: HYPERION INFO: ColorAdjustment 'default' => [0; 82]
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: LEDDEVICE INFO: configuration:
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: {
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: "colorOrder" : "rgb",
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: "name" : "MyHyperionConfig",
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: "output" : "/dev/spidev0.0",
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: "rate" : 1000000,
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: "type" : "ws2801"
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: }
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: INFO: Creating linear smoothing
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: INFO: Hyperion started and initialised
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: started
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: INFO: Json server created and started on port 19444
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: INFO: Proto server created and started on port 19445
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: INFO: Frame grabber created and started
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: BORDER SWITCH REQUIRED!!
ssh in: Apr 07 15:42:00 osmc hyperiond[1964]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 07 15:42:03 osmc hyperiond[1964]: EFFECTENGINE INFO: effect finished
ssh in: Apr 07 16:00:56 osmc hyperiond[1964]: INFO: Application closed with code 0
ssh in: Apr 07 16:00:56 osmc systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 07 16:00:56 osmc hyperiond[1964]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 07 16:00:56 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 07 16:01:01 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: Hyperion Ambilight Deamon (2159)
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: HYPERION INFO: ColorTransform 'default' => [0; 82]
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: HYPERION INFO: ColorCorrection 'default' => [0; 82]
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: HYPERION INFO: ColorAdjustment 'default' => [0; 82]
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: LEDDEVICE INFO: configuration:
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: {
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: "colorOrder" : "rgb",
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: "name" : "MyHyperionConfig",
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: "output" : "/dev/spidev0.0",
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: "rate" : 1000000,
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: "type" : "ws2801"
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: }
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: INFO: Creating linear smoothing
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: INFO: Hyperion started and initialised
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: started
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: INFO: Json server created and started on port 19444
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: INFO: Proto server created and started on port 19445
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: INFO: Frame grabber created and started
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: BORDER SWITCH REQUIRED!!
ssh in: Apr 07 16:01:01 osmc hyperiond[2159]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 07 16:01:04 osmc hyperiond[2159]: EFFECTENGINE INFO: effect finished
ssh in: Apr 07 16:01:54 osmc hyperiond[2159]: INFO: Application closed with code 0
ssh in: Apr 07 16:01:54 osmc hyperiond[2159]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 07 16:01:54 osmc systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 07 16:01:54 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 07 16:01:55 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: Hyperion Ambilight Deamon (2183)
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: HYPERION INFO: ColorTransform 'default' => [0; 82]
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: HYPERION INFO: ColorCorrection 'default' => [0; 82]
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: HYPERION INFO: ColorAdjustment 'default' => [0; 82]
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: LEDDEVICE INFO: configuration:
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: {
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: "colorOrder" : "rgb",
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: "name" : "MyHyperionConfig",
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: "output" : "/dev/spidev0.0",
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: "rate" : 1000000,
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: "type" : "ws2801"
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: }
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: INFO: Creating linear smoothing
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: INFO: Hyperion started and initialised
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: started
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: INFO: Json server created and started on port 19444
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: INFO: Proto server created and started on port 19445
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: INFO: Frame grabber created and started
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: BORDER SWITCH REQUIRED!!
ssh in: Apr 07 16:01:55 osmc hyperiond[2183]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 07 16:01:58 osmc hyperiond[2183]: EFFECTENGINE INFO: effect finished
ssh in: Apr 07 16:05:24 osmc hyperiond[2183]: INFO: Application closed with code 0
ssh in: Apr 07 16:05:24 osmc systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 07 16:05:24 osmc hyperiond[2183]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 07 16:05:24 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 07 16:05:26 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: Hyperion Ambilight Deamon (2250)
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: HYPERION INFO: ColorTransform 'default' => [0; 82]
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: HYPERION INFO: ColorCorrection 'default' => [0; 82]
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: HYPERION INFO: ColorAdjustment 'default' => [0; 82]
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: LEDDEVICE INFO: configuration:
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: {
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: "colorOrder" : "rgb",
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: "name" : "MyHyperionConfig",
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: "output" : "/dev/spidev0.0",
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: "rate" : 1000000,
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: "type" : "apa102"
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: }
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: INFO: Creating linear smoothing
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: INFO: Hyperion started and initialised
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: started
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: INFO: Json server created and started on port 19444
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: INFO: Proto server created and started on port 19445
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: INFO: Frame grabber created and started
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: BORDER SWITCH REQUIRED!!
ssh in: Apr 07 16:05:26 osmc hyperiond[2250]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 07 16:05:29 osmc hyperiond[2250]: EFFECTENGINE INFO: effect finished
ssh in: Apr 07 16:12:43 osmc hyperiond[2250]: INFO: Application closed with code 0
ssh in: Apr 07 16:12:43 osmc hyperiond[2250]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 07 16:12:43 osmc systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 07 16:12:43 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 07 16:12:47 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: Hyperion Ambilight Deamon (2344)
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: HYPERION INFO: ColorTransform 'default' => [0; 82]
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: HYPERION INFO: ColorCorrection 'default' => [0; 82]
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: HYPERION INFO: ColorAdjustment 'default' => [0; 82]
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: LEDDEVICE INFO: configuration:
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: {
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: "colorOrder" : "rgb",
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: "name" : "MyHyperionConfig",
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: "output" : "/dev/spidev0.0",
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: "rate" : 1000000,
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: "type" : "apa102"
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: }
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: INFO: Creating linear smoothing
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: INFO: Hyperion started and initialised
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: started
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: INFO: Json server created and started on port 19444
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: INFO: Proto server created and started on port 19445
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: INFO: Frame grabber created and started
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: BORDER SWITCH REQUIRED!!
ssh in: Apr 07 16:12:47 osmc hyperiond[2344]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 07 16:12:50 osmc hyperiond[2344]: EFFECTENGINE INFO: effect finished
ssh in: Apr 07 16:14:19 osmc hyperiond[2344]: INFO: Application closed with code 0
ssh in: Apr 07 16:14:19 osmc systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 07 16:14:19 osmc hyperiond[2344]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 07 16:14:20 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 07 16:14:21 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: Hyperion Ambilight Deamon (2379)
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: HYPERION INFO: ColorTransform 'default' => [0; 82]
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: HYPERION INFO: ColorCorrection 'default' => [0; 82]
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: HYPERION INFO: ColorAdjustment 'default' => [0; 82]
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: LEDDEVICE INFO: configuration:
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: {
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: "colorOrder" : "rgb",
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: "name" : "MyHyperionConfig",
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: "output" : "/dev/spidev0.0",
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: "rate" : 1000000,
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: "type" : "apa102"
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: }
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: INFO: Creating linear smoothing
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: INFO: Hyperion started and initialised
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: started
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: INFO: Json server created and started on port 19444
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: INFO: Proto server created and started on port 19445
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: INFO: Frame grabber created and started
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: BORDER SWITCH REQUIRED!!
ssh in: Apr 07 16:14:21 osmc hyperiond[2379]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 07 16:14:24 osmc hyperiond[2379]: EFFECTENGINE INFO: effect finished
ssh in: Apr 07 16:53:28 osmc hyperiond[2379]: INFO: Application closed with code 0
ssh in: Apr 07 16:53:28 osmc hyperiond[2379]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 07 16:53:28 osmc systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 07 16:53:28 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 07 16:53:30 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: Hyperion Ambilight Deamon (2719)
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: HYPERION INFO: ColorTransform 'default' => [0; 82]
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: HYPERION INFO: ColorCorrection 'default' => [0; 82]
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: HYPERION INFO: ColorAdjustment 'default' => [0; 82]
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: LEDDEVICE INFO: configuration:
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: {
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: "colorOrder" : "rgb",
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: "name" : "MyHyperionConfig",
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: "output" : "/dev/spidev0.0",
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: "rate" : 1000000,
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: "type" : "apa102"
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: }
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: INFO: Creating linear smoothing
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: INFO: Hyperion started and initialised
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: started
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: INFO: Json server created and started on port 19444
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: INFO: Proto server created and started on port 19445
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: INFO: Frame grabber created and started
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: BORDER SWITCH REQUIRED!!
ssh in: Apr 07 16:53:31 osmc hyperiond[2719]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 07 16:53:34 osmc hyperiond[2719]: EFFECTENGINE INFO: effect finished
ssh in: Apr 07 16:54:12 osmc hyperiond[2719]: INFO: Application closed with code 0
ssh in: Apr 07 16:54:12 osmc hyperiond[2719]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 07 16:54:12 osmc systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 07 16:54:12 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 07 16:54:13 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: Hyperion Ambilight Deamon (2752)
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: HYPERION INFO: ColorTransform 'default' => [0; 82]
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: HYPERION INFO: ColorCorrection 'default' => [0; 82]
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: HYPERION INFO: ColorAdjustment 'default' => [0; 82]
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: LEDDEVICE INFO: configuration:
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: {
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: "colorOrder" : "rgb",
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: "name" : "MyHyperionConfig",
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: "output" : "/dev/spidev0.0",
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: "rate" : 1000000,
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: "type" : "apa102"
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: }
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: INFO: Creating linear smoothing
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: INFO: Hyperion started and initialised
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: started
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: INFO: Json server created and started on port 19444
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: INFO: Proto server created and started on port 19445
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: INFO: Frame grabber created and started
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: BORDER SWITCH REQUIRED!!
ssh in: Apr 07 16:54:13 osmc hyperiond[2752]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 07 16:54:16 osmc hyperiond[2752]: EFFECTENGINE INFO: effect finished
ssh in: Apr 07 17:12:26 osmc systemd[1]: Stopping Hyperion Systemd service...
ssh in: Apr 07 17:12:26 osmc hyperiond[2752]: INFO: Application closed with code 0
ssh in: Apr 07 17:12:26 osmc hyperiond[2752]: EFFECTENGINE INFO: Cleaning up Python interpreter
ssh in: Apr 07 17:12:26 osmc systemd[1]: Stopped Hyperion Systemd service.
ssh in: Apr 07 17:12:28 osmc systemd[1]: Started Hyperion Systemd service.
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: Hyperion Ambilight Deamon (2919)
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: Version : V1.03.4 (brindosch-c750c41/dc6a602-1522918225
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: Build Time: Apr 5 2018 01:57:25
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: INFO: Selected configuration file: /etc/hyperion/hyperion.config.json
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: HYPERION INFO: ColorTransform 'default' => [0; 82]
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: HYPERION INFO: ColorCorrection 'default' => [0; 82]
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: HYPERION INFO: ColorAdjustment 'default' => [0; 82]
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: LEDDEVICE INFO: configuration:
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: {
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: "colorOrder" : "rgb",
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: "name" : "MyHyperionConfig",
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: "output" : "/dev/spidev0.0",
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: "rate" : 1000000,
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: "type" : "apa102"
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: }
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: INFO: Creating linear smoothing
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: HYPERION (CS) INFO: Created linear-smoothing(interval_ms=50;settlingTime_ms=200;updateDelay=0
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: EFFECTENGINE INFO: 27 effects loaded from directory /usr/share/hyperion/effects
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: EFFECTENGINE INFO: Initializing Python interpreter
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: INFO: Hyperion started and initialised
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: INFO: Boot sequence 'Rainbow swirl fast' EFFECTENGINE INFO: run effect Rainbow swirl fast on channel 0
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: started
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: INFO: Json server created and started on port 19444
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: INFO: Proto server created and started on port 19445
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: DISPMANXGRABBER INFO: Display opened with resolution: 720x480
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: BLACKBORDER INFO: threshold set to 0 (0)
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: BLACKBORDER INFO: mode:default
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: INFO: Frame grabber created and started
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: BORDER SWITCH REQUIRED!!
ssh in: Apr 07 17:12:28 osmc hyperiond[2919]: CURRENT BORDER TYPE: unknown=0 hor.size=0 vert.size=0
ssh in: Apr 07 17:12:31 osmc hyperiond[2919]: EFFECTENGINE INFO: effect finished -
Stehe gerade auf dem Schlauch.
Wie verbinde ich die LEDs direkt mit dem pi?Genau wie den langen Streifen am TV, nur dass du die rote Leitung zusätzlich an 5V am Pi hängst.
Laut deinem Log scheint alles okay zu sein, er startet und steht diesmal auch auf APA102. Ich sehe allerdings nirgendwo, dass der Befehl von Hypercon geschickt wurde, mal die Farbe zu ändern.. aber der Regenbogen sollte beim Start trotzdem kommen. -
Also ein zusätzlicher Stecker?
Das eine Ende wo rot in der Klemme steckt und das andere an einen Pin beim pi?
Welcher Pin am pi? -
Testaufbau bringt nur was, wenn du das seperat mit einem kleinen Stück LED Streifen machst. Der Pi kann den großen Streifen nicht versorgen.
https://www.jameco.com/Jameco/…erry-pi-circuit-note.html da findest du das Pinout, nimm da einen der beiden 5V Pins oben links. -
Was mich auch wundert, wenn ich meinen ws2801 streifen mit Strom versorge, dann leuchten 2 LEDs, wenn ich den Apa102 an den Strom anschließe leuchtet nix.
Hat das was zu sagen? -
Mit dem Eckverbindern, bei dem ich zwei Kabel abgeschnitten habe?
Testaufbau bringt nur was, wenn du das seperat mit einem kleinen Stück LED Streifen machst. Der Pi kann den großen Streifen nicht versorgen.
https://www.jameco.com/Jameco/…erry-pi-circuit-note.html da findest du das Pinout, nimm da einen der beiden 5V Pins oben links. -
Hab keinen Plan wie das mit dem Teststreifen aussehen muss.
-
Das einfach mal wie angehängt mit einem Streifen von 3 LEDs verkabeln.
Dann kannst du den Kram vor allem in Ruhe testen ohne jedes Mal hinter die Glotze krabbeln zu müssen. -
Muss ich die Kabel löten, oder gibt es eine andere Möglichkeit?
-
Ohne Löten kommst du da nicht weit, die Kontakte sind da zu nah beisammen für Klemmen o.ä.
-
Ok, dann probiere ich das mal aus.
Gibt es überhaupt eine Möglichkeit meine Stripes ans Leuchten zu bekommen?
So langsam verliere ich die Hoffnung. -
gibt es für die apa102 auch einen Controller um zu testen ob die LEDS funktionieren?
-
Ein Arduino mit FastLED Sketch müsste klappen.
-
wo gibt es sowas? Hast Du einen link?
-
Bei allem Respekt, wenn du absolut null ahnung hast, und anscheinend auch extreeeeem zu faul bist auch nur ANSATZWEISE google zu benutzen...dann hol dir ein fertiges lightberry kit oder sonst irgendwas...hält ja kein mensch hier aus...
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!