1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

4K HDR Pi Zero Setup with casing and Order-List

Discussion in 'Hyperion Setup Showcase' started by cyptus, 11 November 2020.

  1. cyptus

    cyptus New Member

    As it took me a while to find the right components to support 4K HDR at 60 HZ which does nicely fit in a casing, i will share the components used here:

    Hardware 194,35 Euro
    Pi Zero WH https://www.amazon.de/gp/product/B07C7FHJDX
    Grabber https://www.amazon.de/gp/product/B0013BXFLG
    4k Scaler https://www.amazon.de/gp/product/B083JVPXDY
    Converter https://www.amazon.de/gp/product/B01AG0MDY4
    Power Supply https://www.amazon.de/gp/product/B07YVBHH6K
    DC Stecker https://www.amazon.de/gp/product/B07D5Q5PPC (power in, power out)
    Cinch Cable https://www.amazon.de/gp/product/B00Y1N11VE
    SD Card https://www.amazon.de/gp/product/B084CJLNM4 (max endurance, longer life-time)
    LED Strip https://www.ebay.de/itm/361662919560?var=630994738442

    Material 77,50 Euro
    Casing https://www.amazon.de/gp/product/B07NVK538F
    Power Cable https://www.amazon.de/gp/product/B07TS1SMY8
    Micro-USB https://www.amazon.de/gp/product/B07K7VDRY8 (cut it, use micro usb part for power to pi, other part for strip connecting to box)
    3x HDMI https://www.amazon.de/gp/product/B013ICNQLQ
    USB OTG https://www.amazon.de/gp/product/B00YOX4JU6 (needed for grabber)
    USB Socket https://www.amazon.de/gp/product/B00H4APOGE (cut it internally, used as data port for led strip)
    2x HDMI Socket https://www.amazon.de/gp/product/B00B7AGIQ2

    Connectors from left to right, top to buttom:
    Power In, HDMI in, HDMI Out, LED Strip DATA Out (5V not connected), Power Out 1, Power Out 2

    I am using two Power-Outs to support power supply for two corners of the strip.
    The USB is used as data transfer (only data pins + ground connected).
    Using this successfully with 2M USB cable from Box to Strip.
    If you are using the whole LED strip, maybe a slightly bigger power supply is needed.
    For the power supply of grabber, converter and scaler i did cut the usb cabels on connect them to the power supply.

    Software running is hyperion-ng.


    • Like Like x 3
  2. harun

    harun Hyperion-Fool

    Very nice buddy!