Sorry, I'm a total noob... how can I have it? Anyway I still didn't config Hyperion NG. I left all standard....
Hyperbian + Hyperion ng + ezcap 269
- Tyler983
- Erledigt
-
-
Ok I got it! Here my json config
-
@TPmodding And here how I think my system should be configured as I have 83 apa102 leds, but no light effect. Leds are always off
and this is what dmesg give to me:
<a href='https://postimg.cc/sG9S0fYv' target='_blank'><img src='https://i.postimg.cc/sG9S0fYv/…0-09-13-alle-10-22-28.png' border='0' alt='Schermata-2020-09-13-alle-10-22-28'/></a> -
Would you mind sharing the log output, please.
Best would be debug log -
@Lord-Grey could you be please so gentle to tell me what's the command to have a debug log? Sorry, but I'm a totally noob
-
@Lord-Grey I don't know if the command I used it's the right one (tail -n 2000 /var/log/syslog), anyway that's the screen I had...
Please can you help me guys? I'm getting crazy...
-
-
-
On the top you see that the LedDevice logs an error.
Unfortunately, you just shared a picture and cut half the important information...Suggest next time you copy the text, put it in a text file and share the text file.
In general, applications have a log (see System->Log).
It is there to support users in getting some reasoning about malfunction.
Suggest you always first have a look in the log, if something is not working as expected and if you cannot resolve it yourself, ask the wider audience.In context of your current Led-Device issue:
I suggest you put "auto" into the "output path" in the LED Controller configuration screen.
Save. Check, if it is working or not. And in case not, review the log and if needed share the log.Hopefully, your device is self identified and you are fine.
-
Ok. Now I see the full log.
Why have you configured a video input to a seriell LedDevice output?go with the "auto" option and report...
-
-
-
-
They are not different. I just used the Default and not the Expert level to keep focus. Sorry for confusing you.
Suggest you also set the Baud rate to 115200. -
Sorry I rebooted and now the only error is:
-- Logs begin at Sun 2020-09-13 21:18:00 BST, end at Sun 2020-09-13 21:23:54 BST. -
Sep 13 21:18:15 HyperBian systemd[1]: Started Hyperion ambient light systemd servic
Sep 13 21:19:10 HyperBian hyperiond[591]: 2020-09-13T21:19:10.171 hyperiond LEDDEVI
Sep 13 21:19:10 HyperBian [591]: Device disabled, device 'adalight' signals error:
Really thx for the big help!!!
-
And what is the error shown after „signals error:“
-
Sep 13 21:19:10 HyperBian [591]: Device disabled, device 'adalight' signals error: 'Timeout writing data to ttyACM0'
-
Now Is newly full of errors...
-
HI @Lord-Grey is it unsolvable? I'm a bit demotivated...
-
could you wait a few days please? the next release is in the pipeline
maybe today
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!