It works. Are you coming to the WebUI?
Hyperbian + Hyperion ng + ezcap 269
- Tyler983
- Erledigt
-
-
@Lord-Grey After reboot. It seems that the bluetooth device makes trouble.
https://prnt.sc/uhvt23 -
-
After setting the device path to the adalight device it works for me.
it was for me "/dev/ttyUSB0" -
output from dmesg please
-
-
lsusb?
-
Now it doesn't connect to the webgui...
-
pi@HyperBian:~ $ lsusb
Bus 002 Device 002: ID 1bcf:2c99 Sunplus Innovation Technology Inc.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 2341:8036 Arduino SA Leonardo (CDC ACM, HID)
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pi@HyperBian:~ $
-
If you can access the WebUI then please enter the path of the device (/dev/ttyACM0) instead of auto.
-
Which Arduino Sketch is running on your Arduino Leonardo?
-
Done, but still nothing, leds are always off. Just at boot they show rgb colors but not swirl...
-
Which Arduino Sketch is running on your Arduino Leonardo?
I haven't Arduino, just rpi4 and ezcap 269
-
Where are the LEDs attached?
-
-
why when I give sudo systemctl stop hyperion.service && /usr/share/hyperion/bin/hyperiond -d I found in the web gui this?
and when I newly active the grabber and the number of leds I have:2020-09-15T21:31:02.125 hyperiond V4L2:AUTO : <INFO> search for usable video devices
2020-09-15T21:31:02.127 hyperiond V4L2:AUTO : <INFO> test v4l device: /dev/video0
2020-09-15T21:31:02.139 hyperiond V4L2:AUTO : <DEBUG> V4L2Grabber.cpp:696:init_device() | Set resolution to width=1920 height=1080
2020-09-15T21:31:02.150 hyperiond V4L2:AUTO : <DEBUG> V4L2Grabber.cpp:713:init_device() | Set framerate to 30 fps
2020-09-15T21:31:02.150 hyperiond V4L2:AUTO : <DEBUG> V4L2Grabber.cpp:735:init_device() | Pixel format=YUYV
2020-09-15T21:31:02.187 hyperiond V4L2:AUTO : <INFO> found usable v4l2 device: /dev/video0 (ezcap U3 capture: ezcap U3 capt)
2020-09-15T21:31:02.190 hyperiond V4L2:AUTO : <INFO> Started
2020-09-15T21:31:02.190 hyperiond V4L2:auto : <DEBUG> GrabberWrapper.cpp:48:start() | Grabber start()
2020-09-15T21:31:02.191 hyperiond V4L2:AUTO : <ERROR> Frame too small: 0 != 4147200
2020-09-15T21:31:02.451 hyperiond HYPERION : <DEBUG> PriorityMuxer.cpp:238:setInputImage() | Priority 240 is now active
2020-09-15T21:31:02.451 hyperiond HYPERION : <DEBUG> PriorityMuxer.cpp:333:setCurrentTime() | Set visible priority to 240
2020-09-15T21:31:02.452 hyperiond HYPERION : <DEBUG> Hyperion.cpp:538:handlPriorityChangedLedDevice() | priority[240], previousPriority[250]
2020-09-15T21:31:10.812 hyperiond V4L2:AUTO : <ERROR> Previous line repeats 3 times
2020-09-15T21:31:10.812 hyperiond COMPONENTREG : <DEBUG> ComponentRegister.cpp:50:handleCompStateChangeRequest() | Disable Hyperion, store current component states
2020-09-15T21:31:10.812 hyperiond COMPONENTREG : <DEBUG> ComponentRegister.cpp:36:setNewComponentState() | Hyperion: disabled
2020-09-15T21:31:10.813 hyperiond COMPONENTREG : <DEBUG> ComponentRegister.cpp:36:setNewComponentState() | Smoothing: disabled
2020-09-15T21:31:10.813 hyperiond COMPONENTREG : <DEBUG> ComponentRegister.cpp:36:setNewComponentState() | Blackborder detector: disabled
2020-09-15T21:31:10.814 hyperiond HYPERION : <DEBUG> PriorityMuxer.cpp:255:clearInput() | Removed source priority 250
2020-09-15T21:31:10.814 hyperiond COMPONENTREG : <DEBUG> ComponentRegister.cpp:36:setNewComponentState() | Framegrabber: disabled
Hyperion caught signal :SIGSEGV
2020-09-15T21:31:10.815 hyperiond HYPERION : <DEBUG> PriorityMuxer.cpp:255:clearInput() | Removed source priority 240
2020-09-15T21:31:10.816 hyperiond HYPERION : <DEBUG> PriorityMuxer.cpp:333:setCurrentTime() | Set visible priority to 254
2020-09-15T21:31:10.816 hyperiond HYPERION : <DEBUG> Hyperion.cpp:538:handlPriorityChangedLedDevice() | priority[254], previousPriority[240]
2020-09-15T21:31:10.816 hyperiond CORE : <ERROR> /lib/arm-linux-gnueabihf/libc.so.6(__default_rt_sa_restorer+0) [0xb55a0130]
2020-09-15T21:31:10.816 hyperiond COMPONENTREG : <DEBUG> ComponentRegister.cpp:36:setNewComponentState() | V4L capture device: disabled
Segmentation fault
-
2020-09-15T21:31:02.191 hyperiond V4L2:AUTO : <ERROR> Frame too small: 0 != 4147200
Plug ezcap to USB2.0 as there are some strange problems with YUV capturing in your config (or MJPEG and YUV if they both exist). Did you ever get the video preview in the web Hyperion.ng and did you upgrade firmware in the ezcap? -
Plugged into usb 2 right now, yes the firmware is updated to the last one and I always had the video preview; still now that I haven't effect on the tv, I can watch the preview ...
-
With a dmesg always the same errors...
-
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!