CEC umschaltung funktioniert nicht richtig

flapman · Jan 10th 2021

2.0.0-alpha.9; Rasp 3b+

Ich versuche die Umschaltung von Fernseher und internen grabber zu managen. Mit Prioritäten in der Hardware abspeichern funktioniert das auch.
Jetzt habe ich mal die CEC Erkennung versucht, diese brachte zumindest einen halben Erfolg. Beim ausschaltet des Fernsehers, schaltet das System um auf intern. Was ich festgestellt habe ist, dass der Schalter in der Komponentensteuerung die USB-Aufnahme auf aus stellt und der Eingang verschwindet dann aus der Quellenauswahl.
Ein wieder einschalten des Fernsehers ändert den Zustand leider nicht zurück.
Selbst manuell lässt sich USB-Aufnahme nicht mehr als Quelleneingang hervorbringen. So muss ich den Rasp neu starten, damit USB-Aufnahme wieder geht.

Was ist das Ziel:
Beim ausschalten des Fernsehers, soll die LEDHardware komplett abschalten. Beim HDMI Eingangswechsel, soll Hyperion von Intern auf extern wechseln.

PHP

2021-01-09T23:28:51.707Z [hyperiond DAEMON] (INFO) CEC handler created
2021-01-09T23:28:51.742Z [hyperiond EFFECTFILES] (INFO) 39 effects loaded from directory :/effects/
2021-01-09T23:28:51.756Z [hyperiond EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
2021-01-09T23:28:51.760Z [hyperiond EFFECTFILES] (INFO) 0 effects loaded from directory /home/pi/.hyperion/custom-effects
2021-01-09T23:28:51.862Z [hyperiond SETTINGSMGR] (DEBUG) (SettingsManager.cpp:109:SettingsManager()) Settings database initialized
2021-01-09T23:28:51.866Z [hyperiond BLACKBORDER] (DEBUG) (BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
2021-01-09T23:28:51.866Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Blackborder detector: enabled
2021-01-09T23:28:51.896Z [hyperiond DAEMON] (INFO) set screen capture device to 'dispmanx'
2021-01-09T23:28:51.897Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2021-01-09T23:28:51.899Z [hyperiond DISPMANXGRABBER] (INFO) Display opened with resolution: 1920x1080
2021-01-09T23:28:51.899Z [hyperiond DISPMANXGRABBER] (DEBUG) (Grabber.cpp:90:setWidthHeight()) Set new width: 80, height: 45 for capture
2021-01-09T23:28:51.899Z [hyperiond DAEMON] (INFO) DISPMANX frame grabber created
2021-01-09T23:28:51.900Z [hyperiond V4L2:AUTO] (DEBUG) (Grabber.cpp:30:setVideoMode()) Set videomode to 0
2021-01-09T23:28:51.902Z [hyperiond V4L2:AUTO] (INFO) Signal threshold set to: {12, 12, 12}
2021-01-09T23:28:51.902Z [hyperiond V4L2:AUTO] (INFO) Cropping image: width=0 height=0; crop: left=11 right=17 top=7 bottom=13
2021-01-09T23:28:51.902Z [hyperiond V4L2:AUTO] (INFO) Signal detection is now disabled
2021-01-09T23:28:51.902Z [hyperiond V4L2:AUTO] (INFO) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2021-01-09T23:28:51.902Z [hyperiond DAEMON] (DEBUG) (hyperiond.cpp:630:handleSettingsUpdate()) V4L2 grabber created
2021-01-09T23:28:51.921Z [hyperiond JSONSERVER] (DEBUG) (JsonServer.cpp:28:JsonServer()) Created instance
2021-01-09T23:28:51.937Z [hyperiond JSONSERVER] (INFO) Started on port 19444
2021-01-09T23:28:51.903Z [hyperiond CEC] (INFO) Starting CEC handler
2021-01-09T23:28:51.910Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Smoothing: enabled
2021-01-09T23:28:51.911Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-01-09T23:28:51.912Z [hyperiond LEDDEVICE] (INFO) Start LedDevice 'apa102'.
2021-01-09T23:28:51.913Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:148:init()) deviceConfig: [{"colorOrder":"bgr","currentLedCount":132,"hardwareLedCount":1,"invert":false,"latchTime":0,"output":"/dev/spidev0.0","rate":1e+06,"rewriteTime":1000,"type":"apa102"}]
2021-01-09T23:28:51.913Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:407:setLatchTime()) LatchTime updated to 0ms
2021-01-09T23:28:51.913Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:428:setRewriteTime()) Refresh interval = 1000ms
2021-01-09T23:28:51.913Z [hyperiond LEDDEVICE] (DEBUG) (LedDevice.cpp:434:setRewriteTime()) RewriteTime updated to 1000ms
2021-01-09T23:28:51.913Z [hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:45:init()) _baudRate_Hz [1000000], _latchTime_ms [0]
2021-01-09T23:28:51.914Z [hyperiond LEDDEVICE] (DEBUG) (ProviderSpi.cpp:46:init()) _spiDataInvert [0], _spiMode [0]
2021-01-09T23:28:51.921Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) Previous line repeats 1 times
2021-01-09T23:28:51.922Z [hyperiond FLATBUFCONN] (INFO) Connecting to Hyperion: 127.0.0.1:19401
2021-01-09T23:28:51.940Z [hyperiond EFFECTENGINE] (INFO) Run effect "Pac-Man" on channel 0
2021-01-09T23:28:51.949Z [hyperiond FLATBUFSERVER] (INFO) Started on port 19400
2021-01-09T23:28:51.952Z [hyperiond PROTOSERVER] (INFO) Started on port 19445
2021-01-09T23:28:51.954Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2021-01-09T23:28:51.956Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:33:initServer()) Initialize Webserver
2021-01-09T23:28:52.034Z [hyperiond EFFECTENGINE] (DEBUG) (EffectEngine.cpp:183:runEffectScript()) Start the effect: name [Pac-Man], smoothCfg [2]
2021-01-09T23:28:52.035Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/EFFECT' with priority 0 as inactive
2021-01-09T23:28:52.037Z [hyperiond HYPERION] (INFO) Initial foreground effect 'Pac-Man' started
2021-01-09T23:28:52.039Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/GRABBER' with priority 250 as inactive
2021-01-09T23:28:52.040Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) Framegrabber: enabled
2021-01-09T23:28:52.042Z [hyperiond Dispmanx] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2021-01-09T23:28:52.042Z [hyperiond BOBLIGHT] (DEBUG) (BoblightServer.cpp:28:BoblightServer()) Instance created
2021-01-09T23:28:52.046Z [hyperiond HYPERION] (INFO) Hyperion instance 'First LED Hardware instance' has been started
2021-01-09T23:28:52.044Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) LED device: enabled
2021-01-09T23:28:52.134Z [hyperiond CEC] (INFO) Auto detecting CEC adapter
2021-01-09T23:28:52.135Z [hyperiond CEC] (INFO) CEC Adapter:
2021-01-09T23:28:52.135Z [hyperiond CEC] (INFO)     Name   : RPI
2021-01-09T23:28:52.136Z [hyperiond CEC] (INFO)     Path   : Raspberry Pi
2021-01-09T23:28:52.143Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 250 is now active
2021-01-09T23:28:52.144Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2021-01-09T23:28:52.145Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [2]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-01-09T23:28:52.146Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[255]
2021-01-09T23:28:52.146Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:569:handlePriorityChangedLedDevice()) new source available -> switch LED-Device on
2021-01-09T23:28:52.152Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2021-01-09T23:28:52.152Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:91:handleSettingsUpdate()) Apply Webserver settings
2021-01-09T23:28:52.152Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2021-01-09T23:28:52.152Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:109:handleSettingsUpdate()) Set document root to: :/webconfig
2021-01-09T23:28:52.153Z [hyperiond WEBSERVER] (INFO) Started on port 8090 name 'Hyperion Webserver'
2021-01-09T23:28:52.173Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:175:handleSettingsUpdate()) Setup SSL certificate
2021-01-09T23:28:52.177Z [hyperiond WEBSERVER] (DEBUG) (WebServer.cpp:191:handleSettingsUpdate()) Setup private SSL key
2021-01-09T23:28:52.178Z [hyperiond WEBSERVER] (INFO) Started on port 8092 name 'Hyperion Webserver'
2021-01-09T23:28:52.248Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:207:setInput()) Priority 0 is now active
2021-01-09T23:28:54.464Z [hyperiond CEC] (INFO) CEC Handler initialized with adapter : RPI
2021-01-09T23:28:55.289Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:315:setCurrentTime()) Timeout clear for priority 0
2021-01-09T23:28:55.289Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 0
2021-01-09T23:28:55.289Z [hyperiond SMOOTHING] (DEBUG) (LinearColorSmoothing.cpp:701:selectConfig()) cfg [0]:  Type: linear - Time: 200 ms, outputRate 25.000000 Hz, interpolationRate: 25.000000 Hz, timer: 40 ms, Dithering: 0, Decay: 1.000000 -> HalfTime: 100.000000 ms
2021-01-09T23:28:55.289Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[0], previousPriority[0]
2021-01-09T23:28:55.539Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 250
2021-01-09T23:28:55.540Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[250], previousPriority[0]
2021-01-09T23:29:10.234Z [hyperiond WEBSOCKET] (DEBUG) (WebSocketClient.cpp:30:WebSocketClient()) New connection from ::ffff:192.168.178.27
2021-01-09T23:29:10.239Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:81:handleInstanceSwitch()) Client '::ffff:192.168.178.27' switch to Hyperion instance 0
2021-01-09T23:31:33.099Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive
2021-01-09T23:31:33.100Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
2021-01-09T23:31:33.102Z [hyperiond V4L2:AUTO] (INFO) available V4L2 devices:
    /dev/video0    usbtv


2021-01-09T23:31:33.102Z [hyperiond V4L2:AUTO] (INFO) search for usable video devices
2021-01-09T23:31:33.103Z [hyperiond V4L2:AUTO] (INFO) test v4l device: /dev/video0
2021-01-09T23:31:33.104Z [hyperiond V4L2:AUTO] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=720 height=480
2021-01-09T23:31:33.104Z [hyperiond V4L2:AUTO] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV
2021-01-09T23:31:33.110Z [hyperiond V4L2:AUTO] (INFO) found usable v4l2 device: /dev/video0 (usbtv)
2021-01-09T23:31:33.154Z [hyperiond V4L2:AUTO] (INFO) Started
2021-01-09T23:31:33.154Z [hyperiond V4L2:auto] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2021-01-09T23:31:33.244Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active
2021-01-09T23:31:33.244Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240
2021-01-09T23:31:33.245Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[250]
2021-01-09T23:31:40.217Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.27
2021-01-09T23:31:40.250Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1063:handleLoggingCommand()) log streaming deactivated for client  ::ffff:192.168.178.27
2021-01-09T23:32:40.202Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:270:clearInput()) Removed source priority 240
2021-01-09T23:32:40.203Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 250
2021-01-09T23:32:40.204Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[250], previousPriority[240]
2021-01-09T23:32:40.207Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: disabled
2021-01-09T23:32:40.210Z [hyperiond V4L2:AUTO] (INFO) Stopped
2021-01-09T23:32:40.211Z [hyperiond V4L2:auto] (DEBUG) (GrabberWrapper.cpp:58:stop()) Grabber stop()
2021-01-09T23:32:41.858Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:161:registerInput()) Register new input 'System/V4L' with priority 240 as inactive
2021-01-09T23:32:41.859Z [hyperiond COMPONENTREG] (DEBUG) (ComponentRegister.cpp:36:setNewComponentState()) V4L capture device: enabled
2021-01-09T23:32:41.862Z [hyperiond V4L2:AUTO] (INFO) configured v4l device: /dev/video0
2021-01-09T23:32:41.864Z [hyperiond V4L2:AUTO] (DEBUG) (V4L2Grabber.cpp:696:init_device()) Set resolution to width=720 height=480
2021-01-09T23:32:41.864Z [hyperiond V4L2:AUTO] (DEBUG) (V4L2Grabber.cpp:735:init_device()) Pixel format=YUYV
2021-01-09T23:32:41.919Z [hyperiond V4L2:AUTO] (INFO) Started
2021-01-09T23:32:41.920Z [hyperiond V4L2:auto] (DEBUG) (GrabberWrapper.cpp:48:start()) Grabber start()
2021-01-09T23:32:41.964Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:251:setInputImage()) Priority 240 is now active
2021-01-09T23:32:41.967Z [hyperiond HYPERION] (DEBUG) (PriorityMuxer.cpp:351:setCurrentTime()) Set visible priority to 240
2021-01-09T23:32:41.969Z [hyperiond HYPERION] (DEBUG) (Hyperion.cpp:559:handlePriorityChangedLedDevice()) priority[240], previousPriority[250]
2021-01-09T23:32:44.806Z [hyperiond WEBSOCKET] (DEBUG) (JsonAPI.cpp:1054:handleLoggingCommand()) log streaming activated for client ::ffff:192.168.178.27

Display More

Participate now!