Setup issues, color speed/sync issues

I finally got Hyperion running on my Pi4, I have my WS2811 lights attached tyo my ESP8266 with WLED. I had this running alone foe a while during christmas in my front window with various christmas lights.

Now runinng this for my TV anbd the colors do not seem to match or as slow to change. is the WS2811 good enough for this? If so what do I need to look at to get this working and in sync properly

I have a USB capture on my Pi, it seems to work, I see video etc.

I have used some Youtube videos that have colors flowing all over the place as a test.

The WIFI AP is within 5 feet of my TV, the PI is plugged into ethernet, and ESP attached to WIFI

I ama t a loss as to why the color changes are slow, ort not accurate (and I have tested with the RGB byte order wizard and red is read and green is green

Thanks

thanks I will try that. one other issue I have is trhe USB device disappears from thje hyperion drop down, trying to figure that out at the moment (happens when I tirn off TV and my sound system(HDMI video/audio) goes this this and then to the tv