SP616E + WS2812B = AmbiLED problem

  • Hallo,

    ich habe versucht den zu Hyperion hinzuzufügen, leider ohne Erfolg.

    Das Device ist "AmbiLED" und nicht Adalight, es gibt bei google ein firmware upgrade, aber mit Loader und der Firmware bleibt das immer beim Upload bei mir hängen, es ist auch über 8 Jahre alt.

    Gibt es andere alternativen wie ich "AmbiLED" als Steuergerät hinzufügen kann in der config?

  • Unfortunately, configuration software is not including an option for AmbiLED HD hardware, but no worry, Hyperion is supporting it. Choose “Adalight” as LED Type Important: Choose Whilelvl as “0.50” or less. Do not choose more than 0.5 value. Output is “/dev/ttyAMA0″ for most of RaspberyyPi.

    AmbiLED HD setup for Hyperion on RaspBMC/OSMC | AmbiLED HD

    regards pclin

    Dreambox ONE / TWO

    dreamOS OE2.6

    Amlogic S922X - 53.000 DMIPS - 2 GB RAM - 16 GB Flash - Twin-DVB-S2X Tuner - HDR10 - HLG
    AudioDSP: miniDSP 2x4HD - Amp: Pentagon - Lautsprecher ELAC / ARENDAL
    LG OLED65BX9LB (PicCap, hyperion.NG webOS)

    FireTV 4K max

    hyperion (classic) & Plugin HyperionControl | hyperion-ng 2.0.16-beta.1 (dreamOS)
    Hyperion-ng (Debian bullseye)
    6 x ESP32/Wemos D1 mini - WLED - SK6812 RGBW-NW 60 LEDs/m
    FeinTech VSP01201 - Grabber Macrosilicon

    LG TV Hyperion webOS & PicCap


    Ambilight for ever

  • dont work, cant flash the firmware, if i flash than is uploading the data but the xloader is froze


    • Enter this command to open text editor:
      sudo nano /etc/hyperion.config.json
    • You will see inside of configuration file.
      Find this line:
      “type” : “adalight”
      Replace the “adalight” part with “ambiled”

    and this i cant find under windows

    • Official Post

    I would suggest you revisit the Baud rate.

    The page pclin referred to shows a different one than you configured.

    Edit: look in the comments of the Setup site

    AmbiLED HD | High Definition Ambient Light by Inovatek Electronics

    You need to go with 115200 Baud + Sperrzeit=30 (which you already have).

    Edited 2 times, last by Lord-Grey ().

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!